• International Journal of Internet, Broadcasting and Communication
• /
• v.15 no.4
• /
• pp.107-114
• /
• 2023

In this paper, the results of experiments conducted in indoor wired and outdoor wireless environments to reduce the interference impact of 5G mobile communication on fixed satellite services using RF Interference Reduction Module (IRM) are presented. Test results for interference signals with a 100MHz bandwidth in a wired environment demonstrate that RF IRM can reduce interference by more than 20dB in a 100MHz bandwidth. The performance of RF IRM was also tested in the S-band wireless environments. In the S-band wireless environments with interference signals having a 20MHz bandwidth, RF IRM exhibits interference reduction performance of 12-15dB, for signals with a 50MHz bandwidth, it shows 10-12dB interference reduction, and for signals with a 100MHz bandwidth, it demonstrates 5-10dB interference reduction. This paper shows that RF IRM can be used not only within transceivers but also in wireless environments to mitigate interference.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.1
• /
• pp.19-27
• /
• 1991

A new bandwidth reduction algorithm is developed by combining the two-step approach and the frontal ordering scheme. In the two-step approach, finite elements are numbered first, followed by nodal numbering based on the graph theory. The concept of wave front is incorporated into it to control the cardinality of the set of adjacent nodes and the bandwidth to be achieved. They are controlled systematically by rational selection of next candidates with the purpose of getting the smaller bandwidth efficiently. Eighteen meshes are renumbered and the results are compared with those of well-known algorithms. The results demonstrate the efficiency and the reliability of the proposed algorithm.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2009.01a
• /
• pp.258-262
• /
• 2009

In this paper, we propose an effective memory reduction algorithm to reduce the amount of reference frame buffer and memory bandwidth in video encoder and decoder. In general video codecs, decoded previous frames should be stored and referred to reduce temporal redundancy. Recently, reference frames are recompressed for memory efficiency and bandwidth reduction between a main processor and external memory. However, these algorithms could hurt coding efficiency. Several algorithms have been proposed to reduce the amount of reference memory with minimum quality degradation. They still suffer from quality degradation with fixed-bit allocation. In this paper, we propose an adaptive block-based min-max quantization that considers local characteristics of image. In the proposed algorithm, basic process unit is $8{\times}8$ for memory alignment and apply an adaptive quantization to each $4{\times}4$ block for minimizing quality degradation. We found that the proposed algorithm could improve approximately 37.5% in coding efficiency, compared with an existing memory reduction algorithm, at the same memory reduction rate.

• ETRI Journal
• /
• v.34 no.4
• /
• pp.503-510
• /
• 2012

We analyze the relationship between channel coherence bandwidth and two complexity-reduced lattice reduction aided detection (LRAD) algorithms for multiple-input multiple-output (MIMO) orthogonal frequency division multiplexing (OFDM) systems in correlated fading channels. In both the adaptive LR algorithm and the fixed interval LR algorithm, we exploit the inherent feature of unimodular transformation matrix P that remains the same for the adjacent highly correlated subcarriers. Complexity simulations demonstrate that the adaptive LR algorithm could eliminate up to approximately 90 percent of the multiplications and 95 percent of the divisions of the brute-force LR algorithm with large coherence bandwidth. The results also show that the adaptive algorithm with both optimum and globally suboptimum initial interval settings could significantly reduce the LR complexity, compared with the brute-force LR and fixed interval LR algorithms, while maintaining the system performance.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.6
• /
• pp.119-127
• /
• 2002

The paper presents the effect of the backlash magnitude and the supplied voltage of motor on the gear reduction servo system. The bandwidth of the system depends heavily on the supplied voltage of motor as well as the backlash magnitude. Specially, the bandwidth of the system increases as the supplied voltage of motor increases. 1t is shown that the system has the bandwidth of zero backlash in case of motor supplied voltage is infinite. It is also found that the magnitude of the supplied voltage of motor is very important in case of the analysis of the system bandwidth.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.157-159
• /
• 2010

Most digital cameras apply a Charge Coupled Device(CCD) Sensor or a Complementary Metal Oxide Semiconductor(COMS) Sensor. And the images captured these sensors include unwanted noises. In this paper, we proposed a method of the Noise Reduction(NR) about noise reduction or recovery in the image. The proposed NR method is related to Bandwidth of the Low Pass Filter(LPF). For improvement of NR, we were changing the filter coefficient of the LPF. The results of simulations with various filter coefficients, [1 2 1] in the LPF and [-1 2 -1] in the High Pass Filter(HPF) have ideal frequency bandwidth and high performance. We proposed a filter coefficient [1 2 1] and [-1 2 -1] in the LPF and the HPF respectively.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.8
• /
• pp.623-628
• /
• 2000

Video-on-demand system in which users can request any video through the network at any time is made possible by rapid increase in network bandwidth and capacity of the media server. However true video-on-demand system cannot support all requests since bandwidth requirement is still too demanding. Therefore efficient bandwidth reduction algorithm is necessary. both the piggybacking method and the batching method are novel solutions that can provide more logical number of streams than the physical system can support. Of course each of them has its pros and cons. hence piggybacking with batching-by-size can take advantage of both the schemes. Some parameters such as the size of batch and the size of the catch-up window should be adjusted and order to maximize the bandwidth reduction for piggybacking with batching-by-size method. One of the most important parameters is decided optimally in this paper. Simulation shows that the optimized parameter can achieve considerable reductionand consequently remarkable enhancement in performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.11C
• /
• pp.1112-1123
• /
• 2002

Providing a multimedia service requires efficient network bandwidth allocation scheduling. Typically, transmission of information with bursty characteristics, such as a video data stream, utilizes some type of smoothing technique that reduces the transmission rate fluctuation. While capable of a drastic reduction in the peak transmission rate, even the optimum smoothing algorithm proposed to date, however, is rather inadequate for multi-stream applications that share network bandwidth since such an algorithm has been designed and applied toward handling each independent stream. In this paper, we proposed an efficient bandwidth allocation algorithm that addresses these shortcomings. The proposed bandwidth allocation algorithm is divided into two steps, a static bandwidth allocation and a dynamic bandwidth allocation. In the former case, the peak rate reduction is achieved by maintaining the accumulated data in the user buffer at a high level, whereas the concept of real demand factor is employed to meet the needs of multi-stream bandwidth allocation in the latter case, Finally, the proposed algorithm's performance was verified with ExSpect 6.41, a Petri net simulation tool.

• 제어로봇시스템학회:학술대회논문집
• /
• 2002.10a
• /
• pp.39.3-39
• /
• 2002

In this paper, presented is a feedback control loop, for an in-plane gimbaled micro gyroscope based on methodology and state weighted model reduction technique. The micro gyroscope is the basic inertial sensors. To improve the performances such as stability, wide dynamic range, bandwidth and especially robustness, it is necessary to design a feedback control loop, which must be robust, because the manufacturing process errors can be large. Especially, to obtain wide bandwidth, the feedback controller is indispensable, because the gyroscope is high Q factor system and has small open loop bandwidth. Moreover, the feedback controller reduces the effect...

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.148-149
• /
• 2003

The parasitic effects due to the current blocking layer limit the bandwidth of the semiconductor laser diode. Thus, the parasitic response of various blocking layers was analyzed. The inin type was the best choice for the leakage current reduction and the bandwidth expansion.