• Title/Summary/Keyword: Bandwidth Estimation

Search Result 287, Processing Time 0.026 seconds

High Frequency Enhancement of Sound Using Wavelet Transform

  • Yoon Won-Jung;Lee Kang-Kyu;Park Kyu-Sik
    • Proceedings of the IEEK Conference
    • /
    • summer
    • /
    • pp.233-236
    • /
    • 2004
  • This paper proposes new method for the enhancement of nonexistent high frequency spectral contents from low sample rate audio signal. For example, Due to the protocol constraint, the audio bandwidth of MP3 is restricted to 16Khz. Although band-restricted MP3 audio provide savings of storage space and network bandwidth, it suffers a major problem of a loss in high frequency fidelity such as localization, ambient information, and bright nature of audio. This paper provides a new mathematical analysis for the adaptive estimation of the high frequency contents based on the nature of the input low sample rate audio. Proposed method can be worked globally to any kind of audio such as speech and music that are restricted by sampling rate and bandwidth.

  • PDF

Bearing/Range Estimation Method using NLS Cost Function in IDRS System (IDRS 시스템에서 Curve Fitting이 적용된 NLS 비용함수를 이용한 방위/거리 추정 기법)

  • Jung, Tae-Jin;Kim, Dae-Kyung;Kwon, Bum-Soo;Yoon, Kyung-Sik;Lee, Kyun-Kyung
    • Journal of the Korea Institute of Military Science and Technology
    • /
    • v.14 no.4
    • /
    • pp.590-597
    • /
    • 2011
  • The IDRS provides detection, classification and bearing/range estimation by performing wavefront curvature analysis on an intercepted active transmission from target. Especially, a estimate of the target bearing/range that significantly affects the optimal operation of own submarine is required. Target bearing/range can be estimated by wavefront curvature ranging which use the difference of time arrival at sensors. But estimation ambiguity occur in bearing/range estimation due to a number of peaks caused by high center frequency and limited bandwidth of the intercepted active transmission and distortion caused by noise. As a result the bearing/range estimation performance is degraded. To estimate target bearing/range correctly, bearing/range estimation method that eliminate estimation ambiguity is required. In this paper, therefore, for wavefront curvature ranging, NLS cost function with curve fitting method is proposed, which provide robust bearing/range estimation performance by eliminating estimation ambiguity. Through simulation the performance of the proposed bearing/range estimation methods are verified.

Adaptive Video Streaming over HTTP with Dynamic Resource Estimation

  • Thang, Truong Cong;Le, Hung T.;Nguyen, Hoc X.;Pham, Anh T.;Kang, Jung Won;Ro, Yong Man
    • Journal of Communications and Networks
    • /
    • v.15 no.6
    • /
    • pp.635-644
    • /
    • 2013
  • Adaptive hypertext transfer protocol (HTTP) streaming has become a new trend to support adaptivity in video delivery. An HTTP streaming client needs to estimate exactly resource availability and resource demand. In this paper, we focus on the most important resource which is bandwidth. A new and general formulation for throughput estimation is presented taking into account previous values of instant throughput and round trip time. Besides, we introduce for the first time the use of bitrate estimation in HTTP streaming. The experiments show that our approach can effectively cope with drastic changes in connection throughput and video bitrate.

On Bias Reduction in Kernel Density Estimation

  • Kim Choongrak;Park Byeong-Uk;Kim Woochul
    • Proceedings of the Korean Statistical Society Conference
    • /
    • 2000.11a
    • /
    • pp.65-73
    • /
    • 2000
  • Kernel estimator is very popular in nonparametric density estimation. In this paper we propose an estimator which reduces the bias to the fourth power of the bandwidth, while the variance of the estimator increases only by at most moderate constant factor. The estimator is fully nonparametric in the sense of convex combination of three kernel estimators, and has good numerical properties.

  • PDF

Historical Study on Density Smoothing in Nonparametric Statistics (비모수 통계학에서 밀도 추정의 평활에 관한 역사적 고찰)

  • 이승우
    • Journal for History of Mathematics
    • /
    • v.17 no.2
    • /
    • pp.15-20
    • /
    • 2004
  • We investigate the unbiasedness and consistency as the statistical properties of density estimators. We show histogram, kernel density estimation, and local adaptive smoothing as density smoothing in this paper. Also, the early and recent research on nonparametric density estimation is described and discussed.

  • PDF

Time-Varying Multipath Channel Estimation with Superimposed Training in CP-OFDM Systems

  • Yang, Qinghai;Kwak, Kyung-Sup
    • ETRI Journal
    • /
    • v.28 no.6
    • /
    • pp.822-825
    • /
    • 2006
  • Based on superimposed training methods, a novel time-varying multipath channel estimation scheme is proposed for orthogonal frequency division multiplexing systems. We first develop a linear least square channel estimator, and meanwhile find the optimal superimposed sequences with respect to the channel estimates' mean square error. Next, a low-rank approximated channel estimator is obtained by using the singular value decomposition. As demonstrated in simulations, the proposed scheme achieves not only better performance but also higher bandwidth efficiency than the conventional pilot-aided approach.

  • PDF

Speed Control of an Induction Motor using Acceleration Feedforward Compensation (가속도 전향보상을 이용한 유도전동기의 속도제어)

  • Kim, Sang-Hoon;Lee, Jae-Wang
    • Journal of Industrial Technology
    • /
    • v.20 no.B
    • /
    • pp.175-182
    • /
    • 2000
  • In this paper, a novel speed control strategy using an acceleration feedforward compensation by the estimation of the system inertia is proposed. With the proposed method, the enhanced speed control performance can be achieved and the speed response against the disturbance torque can be improved for the vector-controller induction motor drive systems in which the bandwidth of the speed controller cannot be made large enough. The experimental results confirm the validity of the proposed strategy.

  • PDF

Parameter Estimation of Permanent Magnet Synchronous Motors using a Least Squares Method (최소자승법을 이용한 영구자석 동기전동기의 파라미터 추정)

  • Kwon, Ki-Hoon;Lee, Kyo-Beum
    • Proceedings of the KIPE Conference
    • /
    • 2018.11a
    • /
    • pp.175-176
    • /
    • 2018
  • This paper presents a method to estimate the parameter of permanent magnet synchronous motor using a least squares method. The approximate solution of the linear simultaneous equations is obtained by the pseudoinverse least squares method of the input current and output voltage data of the current controller. It is possible to obtain the current response of the same bandwidth to the general control target by using the Pole-zero Cancellation technique. This paper verifies the performance of the proposed method by comparing the results of estimation of parameters of different motors by simulation.

  • PDF

An OFDM Frequency Offset Estimation Scheme Robust to Timing Error (시간 오차에 강인한 OFDM 주파수 옵셋 추정 기법)

  • Kim Sang-Hun;Yoon Seok-Ho
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.31 no.6C
    • /
    • pp.623-628
    • /
    • 2006
  • This paper addresses the frequency offset estimation problem in the presence of the timing error for OFDM systems. When the timing error exists, the correlation value used for the frequency offset estimation could be reduced significantly due to the timing error, resulting in considerable degradation in estimation performance. In this paper, using the coherence phase bandwidth (CPB) and a threshold, a novel frequency offset estimation scheme is proposed and based on which, an efficient timing error estimation scheme is also proposed for the re-estimation of the frequency offset. The performance comparison results show that the proposed frequency offset estimation scheme is not only more robust to the timing error but also has less computational complexity, as compared with the conventional schemes. It is also demonstrated by simulation that theproposed timing error estimation scheme gives a reliable estimate of the timing error.

A New Routing Protocol in Wireless Ad-hoc Networks with Multiple Radios and Channels

  • Ko, Sung-Won;Cho, Jeong-Hwan;Hong, Kwon-Eui
    • Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.24 no.7
    • /
    • pp.26-40
    • /
    • 2010
  • We propose a new routing protocol, MCQosR, that is based on bandwidth estimation, admission control, and a routing metric, MCCR - suitable for wireless ad-hoc networks with multiple radios and channels. To use the full capacity of a wireless link, we assume a node with multiple radios for full duplex operation, and a radio using multiple channels to exclude route-intra interference. This makes it possible to use the capacity of a wireless link. Then, to provide bandwidth and delay guarantee, we have a radio with a fixed channel for layer-3 data reception at each node, used to estimate the available bandwidth and expected delay of a wireless link. Based on the estimate of available bandwidth and delay, we apply the call admission control to a new call requiring bandwidth and delay guarantee. New calls with traffic that will overflow link or network capacity are rejected so the accepted calls can use the required bandwidth and delay. Finally, we propose a routing metric, MCCR, which considers the channel contentions and collisions of a wireless link operating in CSMA/CA. MCCR is useful for finding a route with less traffic and distributing traffic over the network to prevent network congestion as much as possible. The simulation of the MCQosR protocol and the MCCR metric shows traffic is distributed and guaranteed service is provided for accepted calls.