• 한국정보전자통신기술학회논문지
• /
• 제3권2호
• /
• pp.31-38
• /
• 2010

PBG 구조의 메타물질 설계시 패턴 형태와 배열 구조에 따른 금지대역(bandgap)을 정확하게 설계하기 어려운 문제가 있다. 본 논문에서는 2차원 배열구조로 어떤 모양의 패턴에 대해서도 빠르고 정확하게 원하는 금지대역을 설계할 수 있는 방법을 제안한다. 2차원 평면상의 메타물질 구조는 주기배열로 이루어져 있기 때문에 FDTD 수치해석 방법에 주기경계조건을 부여함으로서 계산영역을 줄였다. 또한 각 패턴이 갖는 L, C 값을 2차원적으로 고려하여 계산하였기 때문에 보다 정확한 설계가 가능하였다. 5GHz 대역에서 정사각형 패턴을 갖는 메타물질을 설계하여 기존의 마이크로스트립 선로를 이용한 1차원 메타물질 해석 값과 비교하였을 때 정확도가 평균적으로 14.7% 향상됨을 확인할 수 있었다.

• Current Photovoltaic Research
• /
• 제4권3호
• /
• pp.114-118
• /
• 2016

$Cu_{1.8}Zn_{1.2}(Sn_{1-x}Ge_x)S_4$ (CZTGeS) nanocrystals were mechanochemically synthesized from elemental precursor powders without using any organic solvents and any additives. The composition of CZTGeS nanocrystals were systematically varied with different Ge mole fraction (x) from 0.1 to 0.9. The XRD, Raman spectroscopy, high-resolution TEM, and diffuse reflectance studies show that the as-synthesized CZTGeS nanocrystals exhibited consistent changes in various structural and optical properties as a function of x, such as lattice parameters, wave numbers for $A_1$ Raman vibration mode, interplanar distances (d-spacing), and optical bandgap energies. The bandgap energy of the synthesized CZTGeS nanocrystals gradually increases from 1.40 to 1.61 eV with increasing x from 0.1 to 0.9, demonstrating that Ge-doping is useful means to tune the bandgap of mechanochemically synthesized nanocrystals-based kesterite thin-film solar cells. The preliminary solar cell performance is presented with an efficiency of 3.66%.

• 전기학회논문지
• /
• 제65권1호
• /
• pp.88-96
• /
• 2016

In this paper, the GaN FET based phase-shift full-bridge dc-dc converter design is implemented. Switch characteristics of GaN FET were analyzed in detail by comparing state-of-the-art Si MOSFET. Owing to the low conduction resistance and parasitic capacitance, it is expected to GaN FET based power conversion system has improved performance. However, GaN FET is vulnerable to electric interference due to the relatively low threshold voltage and fast switching transient. Therefore, it is necessary to consider PCB layout to design GaN FET based power system because PCB layout is the main reason of stray inductance. To reduce the electric noise, gate voltage of GaN FET is analyzed according to operation mode of phase-shift full-bridge dc-dc converter. Two 600W phase-shifted full-bridge dc-dc converter are designed based on the result to evaluate effects of stray inductance.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.118-118
• /
• 2010

유리 기판 상에 system on panel (SOP) 구현을 위한 비휘발성 메모리 (NVM)를 제작하였다. 기존에 사용되던 charge storage layer인 SiNx 대신에 a-Si를 사용하여 전하 저장량 증가 및 전하유지 특성 향상시켰다. 그 결과 bandgap이 작아 band edge 저장 가능하였으며, SiNx 와 마찬가지로 a-Si 내 트랩에 저장되었다. $SiO_2$/a-Si와 a-Si/SiON 계면의 결함 사이트에 전하 저장되었으며, 또한 bandgap이 작아 트랩 또는 band edge에 위치한 전하들이 높은 bandgap을 가지는 blocking 또는 tunneling layer를 통하여 빠져 나오기 어려웠다. ONOn 구조의 두께와 동일한 OSOn 박막을 사용한 구조에서는 전하 저장 특성은 뛰어나나 기억유지 특성이 나빴다. 이에 대한 향상 방안으로는 Tunneling 박막의 두께를 증가시키는 것과 OSOSOn 적층 구조 소자를 만드는 방법이 있다. Tunneling 박막의 두께를 증가시킨 소자는 기억유지 특성 향상되는 특성을 보였으며 OSOSOn 적층 구조 소자는 전하저장 및 기억유지 특성 향상을 보였다. 특히, OSOSOn 구조의 경우 2개의 터널링 barrier를 사용함으로써 전하 저장 사이트의 증가에 기여하며, 기억 유지 특성도 좋아졌다. 본 연구에서 소자는 NVM이 아닌 MIS 구조로만 제작되었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2000년도 제1회 학술대회 논문집
• /
• pp.209-210
• /
• 2000

The energy transfer from photoexcited polyvinylcarbazole (PVK) chromophores with a bandgap of 3.7 eV as a donor to fluorophores of poly(dihexylfluorenevinylene) (PDHFV) or poly(dihexylfluorenedihexoxyphenylenevinylene) (PDHFHPV) as an acceptor in bilayered specimens should be carried out since the spectral overlap pairs fulfills the requirement for the $F{\"{o}}rster-type$ condition. However, the energy transfer rate from the chromophores with a wider bandgap to the fluorophores with a narrower bandgap is proved to be strongly dependent on the lifetime ratio between the excitons.

• Transactions on Electrical and Electronic Materials
• /
• 제5권2호
• /
• pp.71-75
• /
• 2004

This paper proposes a new bandgap reference (BGR) circuit which takes advantage of a cascode current mirror biasing to reduce the V$\_$ref/ variation, and sizing technique, which utilizes two related ratio numbers k and N, to reduce the PNP BJT area. The proposed BGR is designed and fabricated on a test chip with a goal to provide a reference voltage to the 10 bit A/D(4-4-4 pipeline architecture) converter of the CMOS Active Pixel Sensor (APS) imager to be used in X-ray imaging. The basic temperature variation effect on V$\_$ref/ of the BGR has a maximum delta of 6 mV over the temperature range of 25$^{\circ}C$ to 70$^{\circ}C$. To verify that the proposed BGR has radiation hardness for the X-ray imaging application, total ionization dose (TID) effect under Co-60 exposure conditions has been evaluated. The measured V$\_$ref/ variation under the radiation condition has a maximum delta of 33 mV over the range of 0 krad to 100 krad. For the given voltage, temperature, and radiation, the BGR has been satisfied well within the requirement of the target 10 bit A/D converter.

• 한국전기전자재료학회논문지
• /
• 제20권11호
• /
• pp.932-938
• /
• 2007

The structural, optical, and electrical properties of ZnO thin films grown on glass by radio-frequency (rf) magnetron sputtering were investigated. The mixture flow ratio of $O_2$ to Ar, which was operated with sputtering gas, was chosen as a parameter for growing high-qualify ZnO thin films. The structural properties and surface morphologies of the thin films were characterized by the X-ray diffraction and the atomic force microscope, respectively. As for the optical properties of the films, the optical absorbance was measured in the wavelength range of 300-1100 nm by using UV-VIS spectrophotometer. The optical transmittance, absorption coefficient, and optical bandgap energy of ZnO thin films were calculated from the measured data. The crystallinity of the films was improved and the bandgap energy was increased from 3.08 eV to 3.23 eV as the oxygen flow ratio was increased from 0 % to 50 %. Furthermore, The ultraviolet and violet luminescences were observed by using photoluminescence spectroscopy. The hall mobility was decreased with the increase of oxygen flow ratio.

• 한국전기전자재료학회논문지
• /
• 제29권9호
• /
• pp.576-580
• /
• 2016

Single-layered transition metal dichalcogenides (TMDs) exhibit more interesting physical properties than those of bulk TMDs owing to the indirect to direct bandgap transition occurring due to quantum confinement. In this research, we demonstrate that layer-by-layer laser etching of molybdenum diselenide ($MoSe_2$) flakes could be controlled by varying the parameters employed in laser irradiation (time, intensity, interval, etc.). We observed a dramatic increase in the photoluminescence (PL) intensity (1.54 eV peak) after etching the samples, indicating that the removal of several layers of $MoSe_2$ led to a change from indirect to direct bandgap. The laser-etched $MoSe_2$ exhibited the single $MoSe_2$ Raman vibration modes at ${\sim}239.4cm^{-1}$ and ${\sim}295cm^{-1}$, associated to out-of-plane $A_{1g}$ and in-plane ${E^1}_{2g}$ Raman modes, respectively. These results indicate that controlling the number of $MoSe_2$ layers by laser etching method could be employed for optimizing the performance of nano-electronic devices.

• 태양에너지
• /
• 제20권1호
• /
• pp.11-20
• /
• 2000

To get more insight into the buffering effects of the p-${\mu}c$-Si:H Inserted at the p-a-SiC:H/i-a-Si:H interface, we present a systematic numerical simulation using Gummel-Schafetter method. The reduced recombination loss at the p/i interface due to a constant bandgap buffer is analysed in terms of the variation of the p/i Interface region with a short lifetime and the characterisitics of the buffer such as mobility bandgap, acceptor concentration, and D-state density. The numerical modeling on the constant bandgap buffer demonstrates clearly that the buffering effects of the thin p-${\mu}c$-Si:H originate from the shrinkage of highly defective region with a short lifetime in the vicinity of the p/i interface.

• 전자통신동향분석
• /
• 제33권6호
• /
• pp.12-23
• /
• 2018

In this paper, we review the technical trends of diamond and gallium oxide ($Ga_2O_3$) semiconductor technologies among ultra-wide bandgap semiconductor technologies for harsh environments. Diamond exhibits some of the most extreme physical properties such as a wide bandgap, high breakdown field, high electron mobility, and high thermal conductivity, yet its practical use in harsh environments has been limited owing to its scarcity, expense, and small-sized substrate. In addition, the difficulty of n-type doping through ion implantation into diamond is an obstacle to the normally-off operation of transistors. $Ga_2O_3$ also has material properties such as a wide bandgap, high breakdown field, and high working temperature superior to that of silicon, gallium arsenide, gallium nitride, silicon carbide, and so on. In addition, $Ga_2O_3$ bulk crystal growth has developed dramatically. Although the bulk growth is still relatively immature, a 2-inch substrate can already be purchased, whereas 4- and 6-inch substrates are currently under development. Owing to the rapid development of $Ga_2O_3$ bulk and epitaxy growth, device results have quickly followed. We look briefly into diamond and $Ga_2O_3$ semiconductor devices and epitaxy results that can be applied to harsh environments.