• Journal of Veterinary Clinics
• /
• v.35 no.1
• /
• pp.30-33
• /
• 2018

A 7-month-old female Bichon Frise, displaying neck pain and ataxia, was diagnosed with craniocervical junction abonormality (CJA), along with atlantoaxial subluxation. Surgical fixation of the atlantoaxial subluxation was performed, using cortical screws and bone cement, along with an odontoidectomy. After surgery, nonsteroidal anti-inflammatory medication was prescribed for pain control, and a loose bandage was applied to the neck. Mild ambulatory tetraparesis remained 1 week after surgery. Three weeks after surgery, the range of neck motion was near normal, and clinical signs had improved. CJA should be considered as a differential diagnosis in dogs with cervical myelopathy. Surgical stabilization using cortical screws and bone cement through a ventral approach can be successful in dogs with CJA and atlantoaxial subluxation.

• Journal of Veterinary Clinics
• /
• v.39 no.2
• /
• pp.65-69
• /
• 2022

A 5 day-old Warmblood foal was presented with a quarter crack due to the dam accidentally stepping on his left hind foot. Physical examination revealed the vertical crack included the coronary band of the medial side of the left hind hoof (quarter crack) with the lower pastern avulsion wound. Different from adult horses, the foot of the 5 day-old foal lacked adequate hoof wall thickness for stainless steel wire insertion and hoof size for a reinforcing fabric to be applied. Therefore, the authors decided to stabilize the edges of the cracked wall only by the polymethyl methacrylate (PMMA) composites without wiring and a reinforcing fabric application; and gluing a plastic shoe that was reshaped to protect the lower pastern and to spread pressure to other parts of the hoof when bearing weight. Disinfection and a supportive bandage were applied daily for 2 weeks. A month after the hoof crack accident, lameness had diminished. The quarter crack in this foal was treated successfully by the application of the composites three times with a reshaped gluing shoe, with approximately a month interval over the 4 months. After 4 months, it presented a successful functional recovery and needed no further treatment. When followed up 8 months after the accident, it revealed successful outcomes without hoof shape distortion and unbalanced hoof/limb growth.

• Journal of Sensor Science and Technology
• /
• v.32 no.6
• /
• pp.357-369
• /
• 2023

Wound healing is a complex and dynamic process, making the accurate and timely assessment of skin wounds a crucial aspect of effective wound care management, especially for chronic wounds. Unlike conventional wound dressings that simply cover the wound area once some form of medicine is administered onto the wound, recent studies have introduced versatile approaches to smart wound dressings capable of interacting with wound fluids to monitor physicochemical and pathological parameters to determine the wound healing status. Such electrochemical wound dressings can be integrated with on-demand, closed-loop drug delivery or stimulation systems and ultimately expanded into an ideal technological platform for the prevention, treatment, and management of skin wounds or illnesses. This article briefly reviews the wound healing mechanism and recent strategies for effective wound care management. Specifically, this review discusses the following aspects of smart wound dressings: sensor-integrated smart bandages to detect wound biomarkers, smart bandages developed to accelerate wound healing, and wireless, closed-loop automatic (on-demand) wound healing systems. This review concludes by providing future perspectives on effective wound care management.

• Clinics in Shoulder and Elbow
• /
• v.1 no.1
• /
• pp.139-145
• /
• 1998

This report describes a rare, congenital hypertrophy of the left upper extremity that appeared after compressive bandage of right arm at the age of two. He is eighteen years old, and hypertrophy was aggravated for about 2 years since he started weight training exercise. Recently, skin turgor changed and he visited the Dermatology department. Skin biopsy revealed increased thickness of the dermis. On Orthopaedic examination, the left arm showed non­specific neuro-muscular changes other than easy fatigability a.nd increased skin consistency after exercise, compared to the right arm. The differences of circumference were 2.5 to 4cm according to the level of the upper limb. But the relative proportion of hypertrophy of the limb was balanced., On X-ray examination, bony changes were not shown. Through the MRI, we could find edematous changes of subcutaneous fatty tissue. Muscular structures showed unremarkable changes. Through the endurance test of both arms, we could find a decrease in endurance of the left upper arm musculatures. On histologic examination, infrequent focal necrosis and peri fascicular degeneration of the muscle fiber were present.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.46 no.2
• /
• pp.108-115
• /
• 2020

Objectives: Kinesiology tape (KT) creates a pulling force on the skin, thus improving blood and lymph flow by alleviating hemorrhage and congestion of lymphatic fluid. The authors hypothesized that the use of KT could be beneficial for the management of complications after head and neck surgery and designed this study to evaluate the effects of KT on swelling, pain, and trismus after enucleation of mandibular dentigerous cysts with third molar extraction. Materials and Methods: Forty patients who underwent enucleation of a dentigerous cyst with extraction of the mandibular third molar were selected. The patients were randomized into two groups (n=20 each): a KT group, where KT was applied after surgery in addition to basic postoperative care, and a control group, where patients received basic postoperative care without KT application. Swelling, pain, and trismus were evaluated before surgery (T0) and on postoperative days 1 (T1), 2 (T2), and 3 (T3). Cyst volume, gauze weight for assessing bleeding, and operation time were recorded. Results: There was a significant difference between the two groups in the change in swelling up to T1 and the change in swelling between T1 and T2. The maximum swelling in the KT group was significantly less than that in the No-KT group and maximum swelling appeared faster in the KT group than in the No-KT group. Both groups showed a mild pain response but there was no significant difference between the two groups. There was no significant difference on interincisal distance change between the two groups. There were no correlations between cyst volume, bleeding, operation time, and maximum swelling. Conclusion: KT can effectively manage facial swelling after oral and maxillofacial surgeries such as cyst enucleation and third molar extraction, thus improving postoperative patient satisfaction levels and quality of life.

• Progress in Superconductivity and Cryogenics
• /
• v.6 no.4
• /
• pp.27-31
• /
• 2004

This paper describes the development and fabrication of a high temperature superconducting motor which consists of HTS rotor and air-core stator. The machine was designed for the rated power of 100hp at 1800 rpm. The HTS field windings are composed of the double-pancake coils wound with AMSC's SUS-reinforced Bi-2223 tape conductor. These were assembled on the support structure and fixed by a bandage of glass-fiber composite. The cooling system is based on the heat transfer mechanism of the thermosyphon by using GM cryocooler as cooling source. The cold head is in contact with the condenser of a Ne-filled thermosyphon. The rotor assembly was tested independently at the stationary state and combined with stator. Characteristic parameters such as reactances, inductances, and time constants were determined to obtain a consistent overview of the machine operation properties. This motor has met all design parameters by demonstrating HTS field winding, cryogenic refrigeration systems and an air-core armature winding cooled with air. The HTS field winding could be cooled down below 30K. No-load test of open-circuit characteristics(OCC) and short-circuit characteristics(SCC) and load test with resistive load bank were conducted in generator mode. Maximum operating current of field winding at 30K was 120A. From OCC and SCC test results synchronous inductance and synchronous reactance were 2.4mH, 0.49pu, respectively. Efficiency of this HTS machine was 93.3% in full load(100hp) test. This paper will present design, construction, and basic experimental test results of the 100hp HTS machine.

• Archives of Plastic Surgery
• /
• v.33 no.1
• /
• pp.107-112
• /
• 2006

If autogenous nail is lost in nail bed injuries, alternative effective nail bed protection material is questionable in postoperative follow up period. The conventional modality with autogenous nail coverage have several disadvantages such as drawback of maintenance, higher chance of loss and complex dressing step (eg. ointment apply for humidification and nail fixation using tape or bandage). So, we have studied the usefulness of adhesive silicone gel sheet for alternative nail bed protection material until the end of nail regeneration. From March 2003 to July 2004, we have experienced 215 traumatic nail bed injuries except fingertip loss. Among these patient, we classified two groups, 30 cases with autogenous nail protection(Group I) and 30 cases with adhesive silicone gel sheet protection(Group II). Mean full nail growth time was 3.6 months in group I and 3.8 months in group II. Mean final nail appearance score(0: poor, 4: excellent) was 3.0 in group I and 3.5 in group II. Adhesive silicone gel sheet protection(Group II) was slightly superior to the autogenous nail protection in final appearance, especially sterile matrix laceration. In conclusion, we believe that adhesive silicone gel sheet application is a simple, acceptable, alternative method for protecting nail bed with loss of autogenous nail. It has a number of advantages compared with autogenous nail such as better humidification, controllable hygiene, less pain, less hospitalization, less frequent visit, less chance of loss, avoiding complex dressing step and more even pressure with adhesiveness, flexibility and durability.

• Journal of Chest Surgery
• /
• v.5 no.2
• /
• pp.107-112
• /
• 1972

Recently we experienced a case of the portal hypertension, extrahepatlc origin in the National Medical Center, Seoul. The case was a male aged 19 who was undergone the elective splenorenal shunt with splenectomy 9 years ago and emergency ligation of the coronary vein because of recurred variceal rupture 6 years later and had recurring esophageal varices with bleeding this time.At the age of 10 he had been occasionally suffering from nasal bleeding and visited to our Pediatric department, when there was encountered for the first time the splenomegaly, esophageal varices in the lower third esophagus on the esophagogram, and stenosis and kinking of the portal vein with rich collateral circulation on the splenoportography without hepatic functional impairment.The elective splenorenal shunt with splenectomy was undergone under the diagnosis of portal hypertension due to congenital anomaly of the portal vein and postoperatlvely no troubles had been obtained until postoperative 1st attack of massive hematemesis due to esophagenl variceal rupture recurred about 6 years later which was confirmed by control esophagogram and it was resulted by stenosis of previous anastomotic site of the splenorenal shunt.Then emergency ligation of the coronary vein was only made for bleeding control and no episodes of hematemesis had been encountered thereafter until April 1972 about 3 years after the 2nd operation, when hematemesis recurred again. In this time, recurring esophageal varices were noted in the lower third esophagus on the control esophagogram and he was employed side to end mesocaval shunt as the final step of portal decompression,and following results were obtained. 1] No postoperatlve troubles as leg edema or pain: Postoperatively leg elevation and elastic bandage on the both legs were employed until discharge. 2] During operation the portal pressure was 300 mm $H_2O$ and immediately lowered to 170 mm $H_2O$ after shunt.

• Journal of Veterinary Clinics
• /
• v.32 no.4
• /
• pp.374-379
• /
• 2015

A 10-year-old gelding Warmblood weighing 560 kg was referred to J&C Equine Hospital with the history of hyperpnea, depression, pawing, and rolling for 7 hours. According to the results of clinical and ultrasound examination, it was considered that intestines were distended with thickened wall. The horse had been treated with lactated Ringers' solution (14 L, IV), flunixin meglumine (1.1 mg/kg, IV), and mineral oil (1 L, PO), but he did not show any responses to those treatments. Exploratory laparotomy was performed and identified incarcerated small intestine through the epiploic foramen. The horse received resection and anastomosis of the entrapped small intestine. After surgery, the horse was treated with intensive postoperative care of fluid therapy (5 L with 20 mEq/L KCl, every 2 hours), flunixin meglumine (1.1 mg/kg, IV, sid), antibiotics (penicillin 22,000 IU/kg, IV, qid and gentamicin 6.6 mg/kg, IV, sid), lidocaine constant rate infusion (bolus 1.3 mg/kg over 15 minutes then 0.05 mg/kg/minute), common nutritional supplements, nasogastric intubation every 2 hours and trunk bandage. Postoperative feeding program had started with small amount of hay every 4 hours and gradually increased to normal amount till 5 days. At 77 days after surgery, he showed sudden outbreak of colic and was euthanized. The causes of colic were small intestinal strangulation by passing through the mesenteric rents and postoperative adhesion between small intestines. According to the results, it is recommended to perform perioperative intensive care of horse with colic and to use several methods to prevent adhesions during abdominal surgery of horses.

• Journal of Fashion Business
• /
• v.17 no.1
• /
• pp.170-185
• /
• 2013

The suitability of the pattern manufactured with the development figure was considered by reviewing the development conditions that can be directly connected to the basic pattern in the human body surface development figure with the cast bandage method. The method to prepare the sleeve basic pattern was based on the cylindrical surface development method, and the sleeve basic pattern covering the 45 and 90 degrees momentum of the arm-movement was made by using the cast-type body surface development figure prepared with the horizontal line of the sleeve hem placed horizontally in the plan and by combining the cast-type body surface development figure in the standing position with the figure in the moving position. The test clothing was prepared with the sleeve pattern adding the bodice pattern in the standing position and the momentum and was worn on the FRP replica. The relationship theory of the body surface development figure with the pattern was derived by reviewing the suitability from the wearing state. The sleeve-cap height of the sleeve basic pattern resulted in about 80% in the standing position when the needs for a physical activity are 45 degrees and the about 50% when the needs for a physical activity are 90 degrees. The additional size of the diagonal length of the sleeve-cap could be set as "0" if the sleeve-cap height is low by 50% and as 50% of the additional size in the standing position if the sleeve-cap height is 80%.