• 전기학회논문지
• /
• 제65권4호
• /
• pp.586-592
• /
• 2016

The current control of Continuous Conduction Mode(CCM) can be implemented by several methods: peak current control; average current control; and hysteresis control. Among these methods, the hysteresis current control is popularly applied in various converter applications because of its simplicity of implementation, fast current control response and inherent peak current limiting capability. However, a current controller with conventional hysteresis band which multiplies the current reference has the disadvantage that the modulation frequency varies in one cycle of the input voltage and, as a result, generates high switching frequency in the low input voltage section. Also it is complicated to design the input filter due to varying switching frequency. This paper proposed an optimum hysteresis-band current control method where the band is generated by using both multiplication method and sum method to maintain the modulation frequency to be nearly constant. This approach can solve the high switching frequency in the low input voltage section, and achieve easy design of input filter. The performance of the proposed converter is verified with the simulation and the experimental works.

• 한국조명전기설비학회지:조명전기설비
• /
• 제11권6호
• /
• pp.64-73
• /
• 1997

RPWM(Random Pulse Width Modulation)은 인버터의 스위칭 주파수를 랜덤(random)하게 변화시킴으로써 고조파 및 소음의 파워 스펙트럼을 광대역에 분산시켜 사람이 불쾌하게 느낄 수 있는 전자기적 가청 소음을 줄이기 위한 PWM 기법으로써 근래에 매우 각광받고 있다. 본 연구에서는 삼각파(반성파, carrier wave)의 주파수를 랜덤하게 변화시키는 방식의 RPWM에 의한 인버터 유도전동기 구동 장치를 구성하였다. 무항실에서 실험 측정한 소음의 파워 스펙트럼으로부터, 소음원에 대한 분석과 삼각파 주파수 변화 폭에 따른 스위칭 주파수대 소음의 저감 효과를 분석하였다. 고속의 DSP TMS320C31을 사용하여 속도 제어와 더불어 RPWM이 실시간적으로 가능하도록 하여, 부하 조건이 다양하게 변화하는 구동 장치에서도 삼각파 주파수의 중심 주파수 및 대역폭을 자유롭게 변화시킴으로써 효과적으로 스위칭 주파수대 가청 소음을 저감하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.1152-1154
• /
• 2002

In this paper, a direct torque control method of an induction motor is proposed which enables constant switching frequency. The switching strategy of a conventional direct torque control scheme which is based on hysteresis comparator results in a variable switching frequency which depends on the speed, flux, stator voltage and hysteresis band of the comparator. This paper proposes a new switching strategy which determine the effective switching time on each switching period by comparing the ascending and descending torque slopes. The simulation results are presented to verify this proposed scheme.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(2)
• /
• pp.812-815
• /
• 2003

Most of all, DTC drive is very simple in its implementation because it needs only two hysteresis comparator and switching vector table for both flux and torque control. The switching strategy of a conventional direct torque control scheme which is based on hysteresis comparator results in a variable switching frequency which depends on the speed, flux, stator voltage and the hysteresis of the comparator. The amplitude of hysteresis band greatly influences on the drive performance such as flux and torque ripple and inverter switching frequency. In this paper the influence of the amplitudes of flux and torque hysteresis bands and sampling time of control program on the torque and flux ripples are investigated. Simulation results confirm the superiority of the DTC under the proposed method over the conventional DTC.

• 한국정보통신학회논문지
• /
• 제10권12호
• /
• pp.2264-2270
• /
• 2006

본 논문에서는 MB-OFDM 방식의 UWB 시스템 응용을 위한 fast-hopping 주파수 합성기들을 설계하였다 세 개의 중심 주파수(3432MHz, 3960MHz, 4488MHz) 생성이 필요한 주파수합성기를 세 가지 구조로 각각 설계하고 성능을 비교하였다. 첫 번째 구조는 4224MHz의 주파수에서 동작하는 단일 PLL을 사용하여 세 개의 중심 주파수를 합성하고, 두 번째 구조는 각각의 중심 주파수에서 동작하는 세 개의 PLL을 사용한다. 본 논문에서 제안된 세 번째 구조는 3960MHz와 528MHz에서 동작하는 두 개의 PLL을 사용하여 원하는 주파수를 합성한다. 0.18um RF CMOS 공정변수를 이용하여 모의실험 한 결과 세 번째 구조가 다른 구조에 비해 switching time, spur, 칩 면적 및 전류 소모 면에서 좋은 특성을 보인다. 제안된 세 번째 구조의 주파수 합성기는 1.3ns 이하의 band switching 특성과 -36dBc 이하의 spur특성을 보이며 1.8V 공급전원 하에서 22mA의 전류를 소모한다.

• 한국전자파학회논문지
• /
• 제22권4호
• /
• pp.440-446
• /
• 2011

본 논문에서는 레이더 시스템에 적용이 가능한 50 W 출력을 가지는 X-대역 pulsed SSPA(Solid State Power Amplifier)를 설계 및 제작하였다. SSPA를 펄스 모드로 동작시키는 방법으로 펄스 변조 방법과 전원 스위칭 방법을 혼용한 방법을 제안하였다. SSPA는 구동 증폭기, 고출력 증폭기, 펄스 변조기로 구성되며, 충분한 이득과 출력 크기를 얻기 위해 25 W GaAs FET 4개를 병렬 구조로 구성하였다. 측정 결과 1.12 GHz 대역폭에서 출력 50 W, 이득 44.2 dB의 성능을 가졌다. 또한, pulse droop은 1 dB 이하로 설계 목표를 만족하였으며, 12.45 ns 이하의 상승/하강 시간을 가졌다. 제작된 X-대역 pulsed SSPA 크기는 $150{\times}105{\times}30\;mm^3$로 매우 작은 크기를 가졌다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권11호
• /
• pp.5223-5242
• /
• 2017

In the last decade, the 2.4 GHz band of IEEE 802.11 WLANs has become heavily congested due to the explosive increase in demand of Wi-Fi connectivity. With the current deployment of enterprise WLANs, channel switching mechanism continues to exhibit inefficiencies because it cannot adapt to real-time channel condition and the inability to support seamless channel switching. Software Defined Networking (SDN) as an emerging architecture is promising to introduce flexibility and programmability for wireless network management. Leveraging SDN to existing enterprise WLANs, channel switching method can be improved significantly. This paper presents a software-defined enterprise WLAN framework with a load aware automatic channel switching solution, which utilizes AP load and channel interference factor (CIF) to provide seamless channel switching. Two automatic channel switching algorithms named Single Switch (SS) and Double Switch (DS) are proposed to improve the overall user experience and the experience of users with highest traffic load respectively. Experiment results demonstrate that our solution can efficiently improve user experience in terms of jitter, transmission delay and network throughout when compared to the conventional channel switching mechanism.

• 대한전자공학회논문지
• /
• 제26권11호
• /
• pp.1829-1838
• /
• 1989

This paper is proposed one method of the exact optimal switching pattern of Selected Harmonic Elimination(SHE) Pulse Width Modulation(PWM). It defined Harmonic Elimination Band (HEB) at Constant Voltage(CV) and sought all solutions which are included HEB. Then, it calculated the Generalized Klirr Factor(GKF) beling to this solution and decided the optimal switching pattern which is minimized GKF. This optimal switching solution is used as initial condition of Newto Raphson(NR) method of decided easily switching pattern at Variable Voltage(VV). We desined the inverter by Power Transister(PTR) and implemented variable speed drive of Induction Motor(IM) in order to verify the validity of this theoretical proposition, then shown this results by comparison and analysis.

• Journal of Information Display
• /
• 제7권1호
• /
• pp.19-24
• /
• 2006

We propose optical configurations of a double-cellgap liquid crystal cell for transflective displays with wide viewing angle and high contrast ratio. The reflective part is designed in the wide-band quarter wave structure to achieve good dark state. For the transmissive part, the compensation method is applied to achieve the super-achromatic dark state, and three switching methods are used : which are vertical switching, horizontal switching to $30^{\circ}$and horizontal switching to $120^{\circ}$, to achieve the bright state.

• 전기학회논문지
• /
• 제61권11호
• /
• pp.1606-1610
• /
• 2012

Hysteresis current regulator has been used widely because of its simple principle and structure. However, when the current band width is too narrow or the applied voltage is relatively too high, the switching frequency may increase abruptly and it generates a large amount of heat. Thus, this study will suggest a better and simple method to reduce the switching frequency. For single phase current control, the proposed hysteresis current control is executed by adding 0 mode state and comparing the slope of the current reference. This simple method decreases the generated switching frequency and significantly reduces the generated heat. This proposed method was proved with simulations and experiments comparing with the classical hysteresis current control method.