• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.4
• /
• pp.988-996
• /
• 1998

BN ceramics with 0.07wt% $V_{2}O_{5}$ and 0.03wt% CuO(BNC3V7) sintered at $900^{\circ}C$ where it is possible for these to be co-fired with Ag electrode. Dielectricconstant of 44.3, TCF of 22 ppm$/^{\circ}C$ and $Qxf_{o}$ value of 22,000 GHz can be obtained from BNC3V7, multilayer type band pass filters using tapped method and conventional method were designed for PCS (Personal Communication System) applications. Tapped method by adopting input/output-tapping scheme the chip filter stucture becomes simpler and needs fewer layers than that using the conventional input/output-coupling scheme. A multilayer type band pass filter fabricated by screen-printing with silver electrode after tape casting. The simulated characteristics of the fabricated filters sintered at $900^{\circ}C$ were compared with the designed ones. Even though the centered frequencies of tapped and conventional band pass chaip filters were measured to shift about 90MHz downward, the band pass characteristics of both filters were similar that of designed ones. The spuriousresonance characteristic of tapped pass chip filter was better than that of conventional chip filer.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.169-170
• /
• 2006

A band pass filter for the V-band application with unique circuit and structure was designed and implemented using 2-metals, 3-BCB layers. In the mean while the effective electrical conductivity of metal layer was extracted and its value was $4{\times}10^7S/m$. The insertion loss of band pass filter at 60 GHz was 3.0 dB and group delay was below 0.1 ns.

• 한국정보통신설비학회:학술대회논문집
• /
• 2003.08a
• /
• pp.293-295
• /
• 2003

In this paper, planar harmonic rejection low-pass filter is proposed to effectively suppress spurious response in stop-band. For suppress the unwanted signal such as spurious and harmonics, we presented a new design method controlled the higher order modes. The proposed low-pass filter was shown to suppress the spurious response by more than $20{\sim}40dB$ compared with conventional microstrip low-pass filters. The filter is evaluated by experiment and simulation with good agreement and shown to have attractive properties such as wide stop band range and low insertion loss.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.7
• /
• pp.998-1000
• /
• 2012

By cascading RHTL (Right-Handed Transmission Line) and LHTL (Left-Handed Transmission Line), we fabricated a BPF (Band Pass Filter) in which the phase propagation at the pass band center frequency is fixed as we want. We utilized a positive phase propagation of a RHTL which is a form of LPF (Low Pass Filter) and negative phase propagation of LHTL which is a form of HPF (High Pass Filter). Therefore, if RHTL and LHTL are cascaded, a BPF can be constructed and the phase propagation inside the passband is decided by the number of RHTLs and LHTLs. In this paper, we provide a detailed theory related to it and proved the theory with an actual experiment. In the experiment, we fabricated two BPFs with similar passband. One with $90^{\circ}$ phase shift and the other with $-90^{\circ}$ phase shift at the center of passband. The result of simulation and actual experiment agrees well. This proves the suggested theory is correct and feasible.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.8 no.4
• /
• pp.257-262
• /
• 2015

In this paper, the split-ring DGS resonator is proposed and its equivalent circuit are analyzed to design the low pass filter. Compared with the conventional dumbell DGS cell, this structure has a flat fluctuation in low frequency range and a sharp slop at edge frequency. The out-band suppression of the SRR-DGS cell can be improved by placing the open stubs on the conductor line which operates as parallel capacitances. Making use of equivalent circuit analytical method, the characteristics of the improved SRR DGS cell are investigated and applied to design compact low pass filter, which has a low in-band loss, sharp slop and high suppression of more than 35dB within a wide out-band frequency range. The dependence of the transmission characteristic on the dimension of a split ring, such as side-length and split-gap, is analyzed in detail. In addition, an improved SRR DGS cell model with open stubs loaded on the conductor line is then presented to improve the out-band suppression. By using the equivalent-circuit analytical method, an S-band microstrip low-pass filter with perfect low-pass characteristic and high out-band suppression is designed and fabricated.

• Journal of Mechanical Science and Technology
• /
• v.17 no.4
• /
• pp.511-520
• /
• 2003

In room acoustics, reverberation time is an important acoustic parameter. However it is often difficult to measure short reverberation times at low frequencies with a traditional band pass filter bank if the product of filter bandwidth (B) and reverberation time (T) is small. It it well known that the minimum permissible product of bandwidth and reverberation time of the traditional band pass filter is at least 16. This strict requirement makes it difficult to measure short reverberation times of an acoustic room at low frequencies exactly. In order to reduce this strict requirement, in the previous paper, the wavelet filter bank was developed and the minimum permissible product of bandwidth and reverberation time was replaced with 4. In the present paper it is demonstrated how the short reverberation times of an practical room at low frequencies are successfully measured by using the wavelet filter bank and the results are compared with the traditional method using a band past filer bank.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.6
• /
• pp.533-539
• /
• 2004

In this work, in order to realize a band pass filter with wide-band characteristics for mobile communications, 2 GHz band pass filter was designed using ring resonator with stub. The three stage wide-band BPF was designed and fabricated. For broadband design, the ring circumference was divided by 4 sections with 1/8 wavelength and 2 sections with 1/4 wavelength which have different line impedances. The characteristics of the proposed BPF were highly improved by using three stage ring resonator. The characteristic impedance values of each sections were obtained by Powell's least square algorithm where differentiations are not needed. The measured results showed a good agreement with the theoretical results as well as ADS simulation.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.133-136
• /
• 2008

In this paper, the parallel coupled line(PCL) band-pass filter satisfying IEEE 802.11a (a:$5.15{\sim}5.25$, b:$5.25{\sim}5.35$, c:$5.725{\sim}5.875$ [GHz]) has been designed for 5[GHz]band W-Lan RX-System applications. The designed PCL Band-Pass filter is of advantage to make a design formula that is small, light and approximate accuracy. It choose a microstrip plane figure because it is possible that a multiplicity of resonator was designed. It was shown that bandwidth was 14% from 5.15GHz to 5.92GHz at the -3dB designed filter. As a result, it is enough to use the designed filter at W-LAN RX-system of the 5GHz band.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.7
• /
• pp.1237-1242
• /
• 2016

In this paper, the low pass filter with harmonics suppression and rejection using parallel coupled-line and radial type open stub is presented. And the resultant characteristic of the proposed low pass filter is that the harmonics are suppressed and rejected in wide bandwidth due to the parallel coupled-line structure. The open stub of a low pass filter is constructed in radial type which can be used to adjust the size of filter. The size of the proposed low pass filter is $6.98{\times}7.60mm2$ and the cut off frequency is 2.45 GHz. And the filter is economical in unit cost and can be constructed easily and has the merit of mass product because the filter is composed of distributed element. Also, the widely rejected harmonics is 128 % in the bandwidth and the insertion and return losses of the low pass filter are 1.07 dB and 19.5 dB, respectively.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.14 no.2
• /
• pp.111-118
• /
• 2004

A number of researchers have attempted to measure the reverberation time of a passenger car, ut the reverberation time of passenger car is too short to measure with the traditional band pass filter. And if the reverberation time is very short, the product of the reverberation time (T) and the bandwidth (B) of the traditional band pass fitter becomes small. The low limit of BT product required for the measurement of reverberation time with the traditional band pass filter is 16. In order to overcome this problem, the wavelet filter bank was developed. In this study, this new wavelet filter was employed to measure the reverberation times of five different classes of passenger cars. The low limit of BT product required for the measurement of reverberation time with the wavelet filter is 4. The reverberation times of five passenger cars were measured successfully with the new wavelet filter bank. The reverberation times measured in most passenger cars was found to be around 0.04. Compared with general acoustic rooms like concert halls, this is a very short reverberation time