• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2002.11a
• /
• pp.149-152
• /
• 2002

In this paper, We have designed an internal chip type-ceramic antenna and diplexer for dual-band handset applications. for increasing bandwidth, antennas used a meander line structure with L, C matching network. The designed diplexer is based on the multi-layered structure for the purpose of the LTCC applications. We have given a notch using resonator for elevated attenuation characteristics.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.259-264
• /
• 2005

In this paper, a novel compact microstrip-fed antenna with band-rejection characteristic for wideband applications is proposed. By cutting an L-shaped notch on the radiation patch, the wideband property for the proposed antenna is achieved. In addition, a C-shaped slot is introduced to obtain the band rejection operation of the antenna. The antenna, with very small size of $15.5\times21 mm^2$ including the ground plane, operates over 3.08 to 10.97 GHz and has the rejection band of 5.03 to 5.91 GHz for $S_{11}$ < -10 dB.

• Journal of Communications and Networks
• /
• v.10 no.1
• /
• pp.63-70
• /
• 2008

Narrow-band interference (NBI) from the coexisting narrow-band services affects the performance of ultra wideband (UWB) systems considerably due to the high power of these narrow-band signals with respect to the UWB signals. Specifically, IEEE 802.11a systems which operate around 5 GHz and overlap the band of UWB signals may interfere with UWB systems significantly. In this paper, we suggest a novel NBI suppression technique based on singular value decomposition (SVD) algorithm in time hopping UWB (TH-UWB) systems. SVD is used to approximate the interference which then is subtracted from the received signals. The algorithm precision and closed-form bit error rate (BER) expression are derived in the wireless multipath channel. Comparing with the conventional suppression methods such as a notch filter and a RAKE receiver, the proposed method is simple and robust and especially suitable for UWB systems.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.8
• /
• pp.1313-1321
• /
• 2000

This paper presents a novel HTS microstrip pseudo-lumped element resonator for the compact and simple filter design. A 7-pole bandpass filter with quasi-elliptic response is designed and fabricated using non-adjacent couplings between resonators. A seven-pole quasi-elliptic filter is fabricated using double sided YBCO on a LaAlO$_3$ substrate with thickness of 0.5 mm and dielectric constant of 23.5. The filter has an insertion loss of 0.8 dB at 20K, a bandwidth of 8 MHz at the center frequency of 1774 MHz, and an attenuation of 33 dB for the cut-off-band of 1 MHz.

• Journal of the Institute of Convergence Signal Processing
• /
• v.20 no.1
• /
• pp.45-50
• /
• 2019

When PPG signal is used in mobile healthcare devices, the accuracy of the measured heartbeat decreases from the influence by the movement of the user. The reason is that the frequency band of the noise overlaps the frequency band of the PPG signal. In order to remove these same noises, the methods using frequency analysis method or application of acceleration sensor have been investigated and showed excellent performance. However, in applying these methods to low-cost healthcare devices, it is difficult to apply these methods because of much processing time and sensor's cost. In order to solve these problems, this study proposed the filter design method using an adaptive notch filter and the fuzzy inference system to extract more accurate heart rate in real time and evaluated its performance. As results, it showed better results than the other methods. Based on the results, when applying the proposed method to design the mobile healthcare device, it is possible to measure the heartbeat more accurately in real time.

• Journal of Advanced Navigation Technology
• /
• v.13 no.5
• /
• pp.714-719
• /
• 2009

In this paper, a compact antenna with band-rejected characteristic for Ultra-Wideband(UWB) applications is proposed. The designed antenna not only shows sufficient impedance bandwidth but has band-rejected characteristic for the frequency band of 5.15~5.825GHz limited by IEEE 802.11a and HIPERLAN/2. To obtain both properties of wideband band rejection, the techniques of a partial ground plane and embedded thin U-slot into planar radiator are used respectively. A designed antenna satisfied a VSWR less than 2:1 for the frequency band of 3.1~10.3GHz with band rejection of 4.90~5.92GHz.

• Transactions of the Society of Information Storage Systems
• /
• v.7 no.2
• /
• pp.70-74
• /
• 2011

The mobile camera module is a device to be inserted in the digital device for camera feature. The mobile camera module is being shaken by vibrations such as handshake during the exposure time. The clarity is compromised by these vibrations, thus the vibration is considered as an external disturbance. Moreover the use of mobile camera module has been being expanded for automotive vibration should be considered. These external disturbances can cause image blurring, thus optical image stabilization should be applied for image compensation. The compensator is fulfilled mechanically by movable lens group or image sensor that adjusts the optical path to the camera movement. Open loop control is useful for well-defined systems like compliant mechanism. Notch filter and lead compensator are designed and applied to improve the stability and bandwidth. The final level of image compensating is confirmed by image processing with MATLAB and CODE V to verify the better performance.

• The Research Journal of the Costume Culture
• /
• v.18 no.6
• /
• pp.1228-1241
• /
• 2010

This study aims to help understanding on design of basic pattern of shirt collars and to suggest schemes to raise completeness of shape by reviewing problems shown in finished products after sewing. From March 2009 to August 2009, 12 patterns for education and firms were collected centering on basic shirt collar form respectively. There are four problems generally raised from a completed shirt collar. In case of overlapping shirt collar on front neck point, the sewing point of shirt collar should be drawn at front neck point of collar band at a distance of about 0.2~0.3cm, and the center front of band and one of bodice should be arranged in a straight line. In case of the problem about right and left length difference of shirt collar, it is raised by closing so the problem was solved by prolonging about 0.2 cm of the center front of left collar. It was evaluated that adjusting notch point when sewing would be more rational solution than solving something on patterns for distance difference problem of shirt collar between right and left part at center front. And a problem about getting loose of front garment between collar band below and the first button was also raised. It was designed 0.2cm cut of collar band. Around basic shirt collar form, above mentioned solutions are applied to the patterns for education and manufacture experimental clothing. So as a result of sensory evaluation, generally good ratings on all items were received.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1972-1974
• /
• 2004

This paper describes the high pass filter with notch charecteristics. The proposed circuits configuration consists of two uniformly distributed RC line (herein after is called URC) and two gain amplifiers ($K_1$ and $K_2$). With the appropriate $K_1$ and $K_2$ , the circuit has a steeper slope of magnitude response at pass band steeper than using a single gain amplifier.

• ETRI Journal
• /
• v.35 no.6
• /
• pp.1075-1083
• /
• 2013

This paper describes an ultra-wideband (UWB) antenna that uses a ring resonator concept. The proposed antenna can operate in the entire UWB, and the IEEE 802.11a frequency band can be rejected by inserting a notch stub into the ring resonator. The experiment results indicate that the measured impedance bandwidth of the proposed antenna is 17.5 GHz (2.5 GHz to at least 20 GHz). The proposed UWB antenna has omnidirectional radiation patterns with a gain variation of 3 dBi (1 dBi to 4 dBi).