• Journal of the Korean Wood Science and Technology
• /
• 제51권3호
• /
• pp.173-182
• /
• 2023

Color is an attribute of visual perception and can be an important factor that affects the preference of customers toward bamboo and wood products. Solar radiation can discolor bamboo surfaces and initiate cracking. The purpose of this study is to investigate the effects of an ultraviolet (UV)-protective coating on the photodiscoloration of untreated and heat-treated Phyllostachys bambusoides bamboo surfaces. Artificial UVA radiators are set at a UVA irradiance of 2,000 W/m² to accelerate the aging of the outer surfaces of hot-air-dried and heat-treated bamboo samples. Half of the samples are coated with transparent UV-protective paint. As the UVA radiation progresses, the discoloration prevention efficiency (DPE) of the UV-protective coating on all samples decreases gradually. The DPEs of the hot-air-dried samples are estimated to be 31.4% and 18.8% after 21 and 72 hours of artificial UVA radiation, respectively. The heat-treated samples exhibit similar trends (29.0% after 21 hours and 10.3% after 72 hours). Recoating the UV-protective paint periodically every six months is expected to minimize the discoloration of the bamboo's outer surface.

• Journal of the Korean Wood Science and Technology
• /
• 제52권1호
• /
• pp.1-12
• /
• 2024

Betung bamboo (Dendrocalamus asper) is used as a building and handicraft material in Indonesia; however, bamboo needs to be dried to increase its stability. This study aimed to evaluate the efficiency of drying bamboo using solar energy and different drying oven designs. The betung bamboo pieces were dried using a direct solar dryer (direct drying) and an indirect solar dryer (indirect drying) and then the decrease in levels that occurred based on the relative humidity (RH) and temperature values achieved in the two dryers were compared. The highest average temperature in the direct indirect drying oven compartment was 60.1 ± 13.1℃ with 19.9 ± 16.4% RH and 60.2 ± 11.9℃ with 19.5 ± 15.5% RH, respectively. The drying defect in indirect drying was lower than that in direct drying, and indirect drying had a 61.7% greater average water loss than direct drying with significant difference (95%, analysis of variance) based on water loss/compartment volume parameters. Thus, the solar drying oven can be used to air-dry bamboo (14%) for 7 d from an initial moisture content of 70%-80% in bamboo strips. The results of this research can be used for small-scale bamboo processing industries that have limited use of electrical energy with quite good results.

• Journal of the Korean Wood Science and Technology
• /
• 제49권6호
• /
• pp.566-573
• /
• 2021

We investigated color changes on the outer surfaces of Phyllostachys bambusoides bam-boo by heat treatment under three different temperatures (180℃, 200℃, and 220℃) for three different durations (60 min, 90 min, and 120 min). A method of predicting the bam-boo surface color change after heat treatment was developed to provide valuable information and increase the added value of domestic bamboo products. The three average color parameters L^*, a^*, and b^* decreased, and the overall color changes increased as the severity factor increased. The values of L^* × a^* × b^* were highly related to the severity factor, and the optimal duration time for the desired bamboo surface color with a certain heat-treatment temperature could be estimated.

• 펄프종이기술
• /
• 제43권2호
• /
• pp.16-23
• /
• 2011

This study was carried out to develop the printing Hanji made of mixed raw materials with mulberry bast fibers and alternative plant fibers such as bamboo, soybean stalks, pepper stalk and sea tangle. All alternative plant fibers were produced by the kraft pulping method with 2 stages of bleaching, and used to prepare the modified traditional paper, Hanji for printing purpose. Printing quality of modified Hanji was analyzed by measuring area and Formcircle of halftones and comparing a letter shape printed on paper. The Hanji made of 60% of mulberry bast fibers and 40% of bamboo bleached kraft pulp showed the best printing quality with the smallest area and the largest Formcircle in all modified Hanji. Through the image analysis of form circles of the letters printed on the Hanji, it could also be confirmed that the best printability of the modified Hanji was made using bamboo fibers.

• 한국가구학회지
• /
• 제25권3호
• /
• pp.207-212
• /
• 2014

With increased interests in environmental issues, people are looking for new materials that serve special and bio-activated functions. One of interesting materials is charcoal which has excellent adsorption ability for harmful volatile organic compounds, fireproof performance, far-infrared ray emission, and electromagnetic shielding. Since non-crack carbonized board was developed from wood-based composite materials, carbonization method might be applied to woodcraft products such as wood cup and bamboo. In this study, manufacture of wood charcoal bowl was conducted with carbonization method developed in 2009 in order to activate wood products market. Ash tree(Fraxinus rhynchophylla) cup was carbonized at $600^{\circ}C$ with two pretreatments which were phenol resin and wood tar solution treatment. After carbonization of ash tree cup, non-crack charcoal cup were successfully manufactured. Phenol resin treatment affected on charcoal cup manufacturing both positively and negatively. For a positive way, it prevented shrinkage. For a negative way, it decreased water repellency. On the contrary, wood tar treatment accelerated shrinkage a bit and increased water repellency. Based on the results, wood tar can be used as pre-treatment solution for reducing post-treatment costs. We confirmed woodcraft products can be carbonized without deformation, so carbonization may provide a high value-added products from wood.

• 대한한의학원전학회지
• /
• 제26권2호
• /
• pp.121-132
• /
• 2013

Objective : Bambusae Caulis in Liquamen has been used by East Asian doctors who approved efficient clinical effects of it since the early stage of medical history. It is commonly used for lifestyle related diseases including stroke in recent days thanks to the increasing number of manufacturers. However, products from pharmaceutical companies as well as food companies are not classified as Bambusae Caulis in Liquamen but Bamboo vinegar. This study aims to discern disparate manufacturing process. Methods : In this study, original texts were searched to corroborate the correct method to produce Bambusae Caulis in Liquamen. It is essential to inspect the original texts thoroughly in the course of modernizing traditional knowledge. Result : Discrimination between the two substances starts from manufacturing process; Bambusae Caulis in Liquamen is made under the temperature of less then $170^{\circ}C$, containing mild fragrance and sweet taste, and the Bamboo vinegar over $170^{\circ}C$ upto $400^{\circ}C$, carrying strong smoky scent and acidness. Although some researches show conforming clinical actions of both products, still there is a possibility that closer clinical study would reveal their discrepancy. Conclusion : Current use of Bambusae vinegar needs speculation. Authenticity in proper manufacturing process can be attained through passed-on medical texts.

• 한국축산식품학회지
• /
• 제36권2호
• /
• pp.152-158
• /
• 2016

This study was carried out to investigate the effects of refined, solar, and bamboo salt on the physico-chemical properties and sensory characteristics of cured pork loin. Moisture, protein, fat, and ash content, lightness, yellowness, cooking yield, and color, juiciness, and tenderness of sensory properties on curing pork loin exhibited no significant differences regardless of the nature of salts. The pH of raw and cooked cured pork loin with added bamboo salt was higher that of other salt treatments. However, the cooking loss, and Warner-Bratzler shear force of cured pork loin with added refined salt was lower than those of solar and bamboo salt pork loins cured. The flavor and overall acceptability scores of treatments with refined salt was higher than those of solar and bamboo salt treatments. The unique flavor of bamboo salt can render it as a functional material for marinating meat products. In addition, the results of this study reveal potential use of bamboo salt in meat curing.

• 한국식생활문화학회지
• /
• 제23권1호
• /
• pp.41-47
• /
• 2008

Survey on the food intake status and health condition of the elerly over 65 years old living in Damyang Jeonnam was performed and meal menus for the pavillion were developed using local products. Allowance of the elderly less than 100,000 won was 45%. The local products of the area recognized by the elderly were bamboo shoot (30%) > bamboo (22.5%) > bamboo basket (12.5%) > do not know (15%) > green tea (10%) > rice(7.5%) > vegetable. In dental health, 52.5% of them had bad condition but 62.5% did not use denture at all. The most favorate foods were Korean (92.5%) and Chinese and Japanese were favored by 5%, and 2.5%, respectively. In percentage of eat-out and use of instant foods, 42.5% of them answered that eating-out chances were very rare and 62.5% answered that they do not use instant foods at all. Potassium intakes for the male and female elderly were significantly very low with values of 2579.2 mg and 2601 mg, respectively (p < 0.05). Calorie intakes for men were 1678.5 kcal, which was only 84% of RI and 1470.8 kcal for women (92%). Shortages of nutrition including calcium intake and others were very serious and the meal was not nutritionally balanced based upon the study of GMDFO. The menu for the elderly in busy farming season of the area were developed with the use of local products and the information from the study.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.760-762
• /
• 2003

This study confirmed the usefulness of short-wavelength infrared (SWIR) in the discrimination and classification of evergreen forest types. A forested area near Hisayama and Sasaguri in Fukuoka Prefecture, Japan, served as the study area. Warm-temperate forest vegetation dominates the study site vegetation. Coniferous plantation forest, natural broad-leaved forest, and bamboo forest were analyzed using LANDSAT5/TM and SPOT4/HRVIR remote sensing data. Samples were extracted for the three forest types, and reflectance factors were compared for each band. Kappa coefficients of various band combinations were also compared by classification accuracy. For the LANDSAT5/TM data observed in April, October, and November, Bands 5 and 7 showed significant differences between bamboo, broad-leaved, and coniferous forests. The same significant difference was not recognized in the visible or near-infrared regions. Classification accuracy, determined by supervised classification, indicated distinct improvements in band combinations with SWIR, as compared to those without SWIR. Similar results were found for both LANDSAT5/TM and SPOT4/HRVIR data. This study identified obvious advantages in using SWIR data in forest-type discrimination and classification.

• Journal of the Korean Wood Science and Technology
• /
• 제47권4호
• /
• pp.519-532
• /
• 2019

The objectives of this study were to evaluate the effects of shelling ratio and resin content on the properties of bamboo oriented strand board (BOSB) from betung (Dendrocalamus asper) and to determine the correlation between the results of dynamic and static bending tests. Strands were steam-treated at $126^{\circ}C$ for 1 h under 0.14 MPa pressure and followed by washing with 1% NaOH solution. Three-layer BOSB with the core layer perpendicular to the surface was formed with shelling ratios (face:core ratio) of 30:70; 40:60; 50:50; 60:40 and binded with 7% and 8% of phenol formaldehyde (PF) resin with the addition of 1% of wax. The evaluation of physical and mechanical properties of BOSB was conducted in accordance with the JIS A 5908:2003 standard and the results were compared with CSA 0437.0 standard for commercial OSB (Grade O-1). Non-destructive testing was conducted using Metriguard Model 239A Stress Wave Timer which has a wave propagation time from 1 to $9,999{\mu}s$ and a resolution of $1{\mu}s$. BOSB with 8% resin content showed better physical and mechanical properties than those with 7% resin content. The increase of the face layer ratio improved the strength of BOSB in parallel direction to the grain. The results suggested that shelling ratio of 50:50 could be used as a simple way to reduce PF resin requirements from 8% to 7% and to meet the requirements of CSA 0437.0 standard. The results of non-destructive and destructive tests showed a strong correlation, suggesting that non-destructive test can be used to estimate the bending properties of BOSB.