• 대한기계학회논문집A
• /
• 제38권7호
• /
• pp.799-807
• /
• 2014

본 논문에서는 가용공간이 적은 실내에서의 사용을 중점으로 한 새로운 방식의 구동방식을 갖는 전동 볼체어의 개발을 소개하고자 한다. 볼체어의 가장 큰 특징은 크게 두 가지로 나뉜다. 첫째는, 구조적 특징으로서 부피와 무게를 최소화하기 위해 원형에 가까운 모양의 팔각형 외골격 프레임 설계를 수행하였고, 공을 포함한 모든 구동부가 로봇 내부에 장착되어 크기뿐만 아니라 사용안전성 면에서 실내용으로 적합하도록 설계하였다. 둘째는, 구동 메커니즘의 특징으로서 볼마우스의 동작 원리를 역발상하여 로봇의 구동방식에 적용하였다. x축, y축의 회전을 담당하는 두 개의 옴니휠이 공을 굴리는 방식으로 각각 모터의 속도를 제어하여 두 개의 바퀴만으로 전 방향 구동이 가능한 홀로노믹 시스템을 구현하였다. 이러한 두 가지의 특징으로부터 볼체어가 좁은 이동 공간에서 전방위 이동을 효과적으로 수행할 수 있음을 실험적으로 구현하였으며, 본 로봇의 자세한 개발 과정을 본 논문에 서술하였다.

• 전기전자학회논문지
• /
• 제25권1호
• /
• pp.148-155
• /
• 2021

로봇 기술이 발전함에 따라 모바일 로봇의 주행 시스템에 대한 연구가 활발히 진행되고 있다. 2륜 및 4륜의 휠을 기반으로 구성되는 모바일 로봇의 주행 시스템은 직선과 같은 단반향 주행에 장점이 있으나 방향 전환 및 제자리 회전에 단점을 가지고 있다. 볼을 휠로 사용하는 볼 로봇은 전방향 이동에 장점이 있으나, 구조적인 불안정한 특성에 의해 균형을 유지하기 위한 자세 제어 및 이동을 위한 주행 제어가 요구된다. 기존의 볼 로봇은 모터에 부착된 엔코더를 이용하여 주행제어를 위한 위치를 추정함으로써 오차가 누적되는 한계를 가지고 있다. 본 연구에서는 영상처리를 통해 볼 로봇의 위치 좌표를 추정하고, 이를 주행 제어에 사용하는 주행 제어 시스템을 제안하였다. 볼 로봇의 위치를 추정하기 위한 영상처리부, 통신부, 표시부 및 제어부를 포함하는 볼 로봇의 주행 제어 시스템을 설계 및 제작하고, 주행 제어 시스템을 적용한 볼 로봇의 주행 실험을 통해 x축 방향 ±50.3mm 및 y축 방향 ±53.9mm의 오차범위 이내에서 오차의 누적 없이 제어됨을 확인하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.309-313
• /
• 2002

This paper presents an artificial intelligent model for a soccer robot. We classified soccer robot as artificial intelligent model into three elemental groups including instinct intuition and reason. Instinct is responsible for keeping the ball, walking or rushing toward the ball. This is very simple fundamental action without regard to associates and enemies. Intuition contributes to the faster/slower moving and simple basic turning to get near to the ball and to make a goal noticing associates and enemies. Reason is the most intelligent part, the law of reason is not simple relatively with instinct and intuition. We shall expect to design the best law of reason for a soccer robot some time. We also compared nerve system and muscles of human being model with controller and motors of a physical soccer robot model individually. We had designed several algorithms and made programs to investigate effects and control soccer robot.

• International Journal of Contents
• /
• 제3권4호
• /
• pp.36-40
• /
• 2007

Robot has been developed as something to help human beings, and robot will be very important field as an entertainment. This paper intends to contribute to developing golf robot as an entertainment using AVR ATmega Chips. It is believed that the entertaining robot giving a pleasure to human beings has good prospects for the rapid growth along with other robot industry. Golf robot developed in this paper has been developed for entertainment and has a similar sense in comparison with the real golf. This golf robot is represented in the way of putting the ball in the hall by hitting the ball just like the actual golf game and putting through making robot come close to the ball with the putting robot. This golf robot can playa game with several people like the actual golf if many putting robots can be used. It is, therefore, considered that the development of golf robots for entertainment using AVR has a high value of the golf robot as an entertainer on the ground that it can playa real golf.

• 제어로봇시스템학회논문지
• /
• 제21권4호
• /
• pp.336-341
• /
• 2015

This paper proposes a balancing and driving control system for a Mecanum wheel ball robot which has a two axis structure and four motors. The inverted pendulum control method is adopted to maintain the balance of the ball robot while it is driving. For the balancing control, an anon-model-based controller has been designed to control the device simply without the need of a complex formula. All the gains of the controller are heuristically adjusted during the experiments. The tilt angle is measured by IMU sensors, which is used to generate the control input of the roll and pitch controller to make the tilt angle zero. For the driving control, the PID control algorithm has been adopted with angles of the wheels and the encoder data. The performance of the designed control system has been verified through the real experiments with the suggested ball robot.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 G
• /
• pp.3004-3006
• /
• 1999

In this paper, we present the ball position and path plain method for the robot-soccer using optical flow. As we compare a optical flow method with a general method within the accurate and effective ball position information of robot-soccer or the path planning, we prove accurate and effective optical flow algorithm to apply ball position and path plain for robot-soccer

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.343-343
• /
• 2000

The conventional actuators with the speed reducer had weakness in supporting the weight of the body and leg itself. To overcome this, a new four bar link mechanism actuated by the ball screw was proposed. Using this, we developed a new type of 10 D.O.F biped robot. The dynamics model of the biped robot is investigated in this paper. In the modeling process, the robot dynamics are expressed in the joint coordinates using the Euler-Lagrange equation. Then, they are converted in to the sliding joint coordinates, and joint torques are expressed in the force along the sliding direction of the ball screw. To test modeling of the robot, a computer simulation was performed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.540-543
• /
• 2002

Conventional robot manipulators actuated by motors with the speed reducer such as the harmonic drive have weakness in the load capacity, since the speed reducer does not have enough strength. To overcome this, we proposed and constructed a new type of the robot actuator which is four-bar-link mechanism driven by the ball screw. We developed a new type of a revolute-jointed robot manipulator composed of four axes. The base axis is actuated with conventional speed reducer, but the others are actuated by the proposed actuators. We analyzed the mechanism of the actuators of the robot joints, and developed the dynamics model. The dynamics are expressed in the joint coordinates, and then they are mapped into the sliding coordinates of the ball screw. The structure specifications of the manipulator shown.

• 한국정밀공학회지
• /
• 제13권2호
• /
• pp.76-83
• /
• 1996

We have developed the unconventional robot arm which is composed of the two main parts, one is a ball screw and the other is a robot arm. The dynamic systems of the robot arm and ball screw are unstable systems coupled with each other. The ball screw mechanism is unstable system but controllable system. The robot arm's dynamics is quasi stable system when ball screw's angular position is zero, else, unstable system. Our system has the duality between stability and controllability at the view point of control. This duality causes difficulty to control of the robot arm using normal control law. We have investigated the location of the characteristic roots of the dynamic equation. And we have found out that the best condition for the control of the arm is quasi stable state. In this paper, we have proposed multiple control laws which are consist of three components to guarantee the stability and controllability simultaneously. The computer simulations were carried out based on VSC about the angular position control of the robot arm, and it is confirmed that the good performances could be obtained by using new controller.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.458-461
• /
• 1997

We have developed a human-sized BWR(biped walking robot) driven by a new actuator based on the ball screw which has high strength and high gar ratio. Each leg of the robot is composed of three pitch joints and one roll joint. In all, a 10 degree-of-freedom robot with two balancing joints was developed. For the purpose of autonomous walking and higher performance, we improved the previous developed BWR. We improved the motor drive efficiency, designed the ball screw actuator in a modular type, and simplified the electric wires. Through this modification, we achieved better performance in walking.