• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.41 no.4
• /
• pp.82-90
• /
• 2009

It is very important to utilize effectively fibrous waste paper in terms of cost savings, environmental effects, and governmental policies. The quality of final products and runnability of papermaking process are primarily affected by constitutions of fibrous raw materials. In specific, board grade paper depends directly on compositions of waste paper bales. At present, the raw materials of board grade paper are mainly derived from lots kinds of wastepaper. Some papermaking countries, like EU, USA and Japan have advanced classification and management systems of recycled fiber, but Korea has not yet organized systematically. In this study, evaluation of wastepaper bale compositions and their fiber properties were carried out for effective utilization of fibrous raw materials for board grade paper production. 3 kinds of wastepaper bales were classified to fibrous or non-fibrous materials. In case of fibrous materials, KOCC, kraft sack paper and white duplex board matters were main component in total weight basis, and in case of non-fibrous materials, vinyl, plastic and cloth matters were main component, in turns. 3 representative kinds of waste paper were disintegrated and classified, and then prepared to handsheet for evaluation of recycled fiber property. Consequently, fines and ash content of waste paper, isolated from KOCC and white duplex board were higher than that of kraft sack paper. pH values of all kinds of waste fibers were neutral or weak alkaline.

• Journal of Biosystems Engineering
• /
• v.41 no.3
• /
• pp.161-169
• /
• 2016

Purpose: To improve the insufficient mechanized forage harvesting system, an integrated forage harvester that produces midsize round bales was developed. Methods: The harvesting performance of the developed harvester was tested in a forage plantation. The harvesting performance was evaluated by investigating the bale production performance and residue ratios of the harvester at three levels of tractor driving speeds. Results: The bales outputs per hour by driving speed shown by the harvester were 30 bales (6.8 MT) at 2.3 km/h, 36 bales (8.4 MT) at 3.2 km/h, and 44 bales (10.5 MT) at 5.1 km/h in the case of rye-straw. In the case of rice-straw, they were 43 bales (8.8 MT) at 4.3 km/h, 44 bales (9.7 MT) at 5.0 km/h, and 48 bales (10.7 MT) at 6.2 km/h. In the case of Italian ryegrass (IRG), they were 35 bales (10.7 MT) at 7.0 km/h, 37 bales (12.0 MT) at 8.3 km/h, and 38 bales (13.2 MT) at 9.5 km/h. The average ratios of residues to the available quantities were 2.61% in the case of rye-straw, 1.89% in the case of rice-straw, and 1.57% in the case of IRG. When residues smaller than 200 mm, which cannot be collected, were excluded, the residue ratios of all crops were good, as they did not exceed 1.0%. Conclusions: Since the baling and wrapping functions, which had been separately operated, were integrated into the developed harvester, the developed harvester is expected to maximize bale production efficiency and increase labor productivity, thereby increasing farming profitability.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.16 no.4
• /
• pp.307-314
• /
• 1996

An experiment was carried out to determine effect of cultivar and preservative on the characteristics and quality of baled oat(Avena sativa L.) hay after 60 days of storage. Ihe main plots consisted of the cultivars such as 'Foothill' and 'Swan', and the subplots consisted of preservatives such as commercial propionic acid(CA), lactic bacteria inoculant(LB) and control(C0). Bale temperature of 'Foothill' oat hay maintained higher than that of 'Swan' oat hay during storage. Bale temperature of oat hay treated with CA remained lowest during the earlier storage period and no significant difference was found among preservatives during the latter storage period. Visual assessment of bale of 'Swan' oat hay was better in the evaluation of mold, odor and color than that of 'Foothill' oat hay after storage. DM content of Foothill oat hay increased markedly than that of 'Swan' oat hay through the storage period. CFU(Colony fodng unit) of total viable micmrganism of oat hay bales was not quite different between preservatives, but that of lactic bacteria of 'Swan' oat hay and 'Foothill' was different by over 16 and lo4, respectively. Total nitrogen content of 'Swan' and 'Foothill' oat hay was 1.45 and 2.22%, respectively(P<0.05) and effect of preservatives on total N content was higher in the order of LB, CA, and CO. ADIN content of 'Swan' was lower than that of 'Foothill'(P

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.31 no.4
• /
• pp.451-462
• /
• 2011

The purpose of this study was to investigate fungi and mycotoxin contamination of the rice straw bale silage in Korean. It was tested the 33 samples of rice straw round bale silage with various condition which fed cattle in the farm. The level of fungal contamination was $2.1{\times}10^6\;cfu\;g^{-1}$ in the average and $9.2{\times}10^8\;cfu\;g^{-1}$ in the maximum. The fungal contamination was detected in the all of normal samples which good condition of rice straw bale silage. When the fungi was isolate and identify, it was found 28 species and mycotoxin producing fungi were 8 species as following as Aspergillus flavus, Aspergillus fumigatus, Fusarium culmorum, Fusarium verticillioides, Penicillium carneum, Penicillium paneum, Penicillium roqueforti, Penicillium viridicatum. Specially, Penicillium paneum was found 42% of samples and Aspergillus sp. (A. flavus, A. fumigatus) are 21% of samples. In case of mycotoxin contamination, the 42% of samples are detected more than one kind of mycotoxin. Some samples are contaminated three kinds of mycotoxin. This study was not found aflatoxin ($B_1$, $B_2$, $G_1$, $G_2$) and fumonisin ($B_1$, $B_2$), but were detected the contamination of ochratoxin A (1.0~5.8 ug/kg), deoxynivalenol (DON, 156.0~776.7 ug/kg) and zearalenone (ZON, 38.0~750.0 ug/kg). Therefore, the above results show that rice straw round bale silage expose on hazard factors as mycotoxigenic fungi and mycotoxin contamination, and than need more research about mycotoxin in animal feed to protect animal and human healthy.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.14 no.1
• /
• pp.61-83
• /
• 2012

To identification of fungi that occurs round bale silages, 253 fungal contaminated samples were collected from 2009 to 2011. Total 253 silage samples from Italian ryegrass, sudan grass, rye, corn, barley and oat were analysed. Total 270 strains were purely isolated from contaminated round bale silages. The fungi were identified with morphological characteristics and rDNA sequence analysis. Nineteen species of fungi(Rhizopus sp., Fusarium spp., Coprinus sp., Blastomyces sp., Aureobasidium sp., Polypaecilum sp., Botryoderma sp., Mucor sp., Scytalidium sp., Sphaeropsis sp., Aspergillus spp., Trichocladium sp., Humicola sp., Staphylotrichum sp., Periconia sp., Verticillium sp., Diplococcium sp., Penicillium spp. and Trichoderma spp.) were identified by morphological characteristics. On the other hand, fungi isolated from silage were identified to Acremonium strictum, Aspergillus tubingensis, Bionectria ochroleuca, Dipodascaceae sp., Fusarium proliferatum, Fusarium oxysporum, Fusrium solani, Gelasinospora reticulata, Gibberella moniliformis, Gibberella zeae, Nectria mauritiicola, Penicillium paneum, Pseudallecheria boydii, Schizophyllum commune, Scopulariopsis brevicaulis and Simplicillium lamellicola by rDNA sequence analysis. Penicillium sp. and Trichoderma sp., were isolated 74 and 64 strains, respectively. Humicola sp., Aspergillus sp., Coprinus sp., and Fusarium spp. were identified 10 to 30 strains. Most fungi were isolated together with more than one species in a sample looked like one species with the naked eyes.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• v.10 no.2
• /
• pp.74-79
• /
• 2005

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.07a
• /
• pp.148-155
• /
• 2000

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2004.05a
• /
• pp.85-90
• /
• 2004

We divided the planting bale into waterproof layer, drainage layer and soil layer so at to investigate changes of live load according to species of wood and composition of the base to make rooftops green. The results are follows, 1. As concerning construction and live load for green roof, sheet waterproofing is superior. 2. When materials of drainage are changed crushed gravel into artificial lightweight graval or ferrite, live load of planting bale is decreased about 22% and 25% in order. 3. When ingredients of soil are chased normal sand into volcanic sand, live load of base is decreased about 28%. Especially, when it is changed into ferrite, 54% of live load is decreased. 4. In this study, all live load we concerned excesses the standard about roof live load of office, school and house. Hence, structure has to be concerned thoroughly when making rooftops green. But, we judge that various methods for making rooftops green can be applied if we consider roof garden when we plan new buildings.

• Resources Recycling
• /
• v.9 no.6
• /
• pp.53-57
• /
• 2000

In the present paper, a current technical progress for recycling of used steel can is described. The developed technology was a kind of pre-treatment through an automatic equipment system to increase recycling and melting efficiency of used steel co. The process consisted of several unit processes such as breaking of steel can bale, removing dust, separation of aluminum can, delacquering, and compressing to bale. Also, aluminum powders were recovered as a by-product at the delacquering step. The process was carried out automatically through by use of the developed equipment system. The automatic system could be very available in mass treatment of used steel can.

• Resources Recycling
• /
• v.4 no.1
• /
• pp.25-30
• /
• 1995

In the preparatIon of reclaimed aluminium lllgot from alumimum scrap, the aluminium recovery was studied a as a function of the preliminary treatment of samples, addition of flux and melting atmosphere. AI dross is produced by an oxidation reaction at the surface of liquid metal. The recovery of AI metal increases u up to maximum 95% by adding salt up to 7%, The recovery of AI metal in the compacted chip bale without oil removal mcrease about 14% compared io non-compacted chip. In the case of the AI seed melting process, the recovery of Al metal of the crushed and compacted chip hale is 97%, In meltmg of alumimum scrap under the atmosphere of carbon and nitrogen gas, the recovery of AI metal increase, but it is decreased when the mixture of salt and carbon powder is added excessively.