• Korean Journal of Community Nutrition
• /
• v.6 no.1
• /
• pp.51-68
• /
• 2001

This investigation studied the relationship between Body Mass Index(BMI) and dietary intake, levels of serum lipid, lipoprotein(a) and plasminogen activator inhibitor-1(PAI-1) of 28.449 Korean adults(16.937 men, 11.542 women) from 1995 to 1999. The dietary assessment was conducted using 24-hour dietary records and food frequency questionnaires. During this five year study, the BMI normal-weight group, as a percentage of the annual test population, decreased from 68.0% to 60.2%, while the BMI overweight and obese groups collectively increased from 25.0% to 29.7%. The levels of serum total cholesterol (TC), LDL-cholesterol(LDL-C), Triacylglycerol(TG) and PAI-1 increased as the values of BMI increased, while the levels of HDL-cholesterol(HDL-C) and lipoprotein(a)(men only) appeared to decrease as values of BMI increased. The levels of daily energy intake also increased as values of BMI increased in both men and women. The obese group had significantly higher levels of carbohydrate, protein, fat(men only), and cholesterol intake than those of the normal-weight, underweight, and overweight groups. In men, BMI positively correlated with the levels of macronutrients and cholesterol intake(p＜0.001), % energy of protein, fat, and alcohol intake(p＜0.001), and the levels of serum TC, LDL-C, TG and PAI-1(p＜0.001), while BMI negatively correlated with % energy of carbohydrate intake, and the levels of Lp(a) and HDL-C(p＜0.001). In women, BMI negatively correlated with level of cholesterol(p＜0.01), fat(p＜0.001), alcohol intake(p＜0.05),% energy of fat (p＜0.001), % energy of alcohol intake and level of and HDL-C(p＜0.001). Subjects who had serum TC, LDL-C, HDL-C, and TG levels greater than the standard reference values(TC＞240mg/㎗, LDL-C＞130mg/㎗, HDL-C＞35, TG＞200mg/㎗) exhibited a higher intake of the three macronutrients, iron, calcium, meat, milk and fatty foods than those subjects who had serum lipid concentrations less-than-or-equal-to the standard reference values. Overall, there was positive correlation between the high risk factors of vascular disease variables, dietary intake, and BMI. Prevalence of hypertension and high blood sugar were increased as BMI increased, but the prevalence of hypertension is decreased as the year goes by. These findings showed that dietary intake, level of serum lipids and other vascular disease risk factors increased as BIM increased. Therefore, middle or upper class Korean adults who have high BMI should improve their eating habits. This involve reducing alcohol, animal fat, high carbohydrate foods, and overall food intake, and balancing intake in order to lower vascular disease risk factors, including obesity.

• Journal of KIISE:Computer Systems and Theory
• /
• v.30 no.12
• /
• pp.708-713
• /
• 2003

For many years clustered heterogeneous web server architecture has been formed on the internet because the explosive internet services and the various quality of requests. The critical point in cluster environment is the mapping schemes of request to server. and recently this is the main issue of internet architecture. The topic of previous mapping methods is to assign equal loads to servers in cluster using the number of requests. But recent growth of various services makes it hard to depend on simple load balancing to satisfy appropriate latency. So mapping based on requested content to decrease response time and to increase cache hit rates on entire servers - so called “content-based” mapping is highly valuated on the internet recently. This paper proposes Prioritized Highest Random Weight mapping(PHRW mapping) that improves content-based mapping to properly fit in the heterogeneous environment. This mapping scheme that assigns requests to the servers with priority, is very effective on heterogeneous web server cluster, especially effective on decreasing latency of reactive data service which has limit on latency. This paper have proved through algorithm and simulation that proposed PHRW mapping show higher-performance by decrease in latency.

• Journal of Biosystems Engineering
• /
• v.2 no.1
• /
• pp.7-24
• /
• 1977

This paper is the forth and fifth one of the study on balanced type oscillating mole drainer. In the light of the results from previous reports about the model tests, some design criteria were established and a prototype machine was set up for experimental purpose. Motion characteristics and functionof the each parts of the machine were checked and analyzed. After that, performance tests of the prototype machine were carried out in thefield. Obtained results are summarized as follows ; 1. Ten centimeter of the bullet diameter was determined so as to be able to attach it to the tractors with capacity of 30 PS to 40 PS. 2. To maintain the balance between the moments of the front shank and rear shank, the oscillating amplitude of the rear bullet was determined to be larger than that of the front bullet. At the same time , the oscillating direction of the rear bullet was designed with the inclines of ten to thirty degrees. 3. An octagonal dynamo transduced was developed for measuring the compressive force of the upper link is measuring the draft force of the machine. Acceptable linear relationship between forces and strain responses from O.D.T. was obtained. 4. Analysing the balancing mechanism of the acting part of the machine , it was found that the total draft force of the machine was equal to the difference between the sum of the draft force produced from the right and left side bending moments of the lower drawber and the compressive force on the upper link. 5. There are acceptable linear relationship between the strain and twisting moment by driving shaft, and between strain and shank moment. Above results enable us to carry out the field experiment with prototype machine. 6. When the test machine was used in the field, it was possible to reduce the oscillating acceleration by forty percent in average as compared it with the single bullet mole drainer. 7. When the test machine was used under the oscillating condition, the dratt torce was reduced by 27 percent to 59 percent as compared it with the test machine under non-oscillating condition, while the draft force was increased by 7 percent to 20 percent as compared it with the mole drainer having oscillating single bullet. The reasoning behind this fact was considered as the resistance force due to the rear shank and bullet. 8. As the amplitude and frequency of the bullet were increased, the torque was increased accordingly. This tendency could be varied with the various characteristics of the given soils. And the larger frequency and amplitute, the more increasing oscil\ulcornerlating power but decreasing draft brce were needed, and draft force was increased as the velocity was increased.9. When the amplitude of the rear bullet was designed to be larger than that of the front bullet, the minimum value of the moment was lowered and oscillating acceleration was reduced. And when the oscillating direction of the rear bullet was declined back\ulcornerwards, oscillating acceleration was increased along with the increasing angle of decli\ulcornernation. When the test machine was operated in high speed, the difference between maximum moments and minimum ones became narrow. This varying magnitude of moments appeared on the moment oscillogram seems to be correlated to the oscillating acceleration and draft force. 10. From the analysis of variance, it was found that those factors such as frequency, amplitude, and operating velocity significantly affected in the oscillating acceleration, the draft resistance, the torque, the moment, and the total power required. And interaction between frequency and amplitude affected in the oscillating acceleration. 11. Within the given situation of this study, the most preferable operating conditions of the test machine were 7 Hz in oscillating frequency, 0.54 m/sec in operating velocity, and 39.1 mm in oscillating amplitude of front and rear bullets. However, it is necessary to select the proper frequency and magnitude of oscillation depending on the soil properties of the field in which the mole drainer is practiced by use of a bal1nced type oscillating mole drainer. 12. It is recommended that a comparative study of the mole drainers would be performed in the near future using two separate balanced oscillating bullet with the one which is operated by oscillating the movable bullet in a single cylinder or other balanced type which may be single oscillating bullet with spring, damper or balancing weight, and that of thing. To expand the applicability of the balanced type oscillating mole drainer in practical use, it is suggested to develop a new mechanism which perform mole drain with vinyl pipe or filling material such as rice hull.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.5 no.1
• /
• pp.47-52
• /
• 2011

The functional loot orthoses, when wearing shoes, are in the direct contact with bottom of foots to improve and recover the correctness of abnormal lower limb musculoskeletal imbalance and the primary role of foot and also, it can act to keep the balance and weight of body and support the weakened region, so that it is very helpful to keep body balance for the standing position. In this paper, it was researched that foot orthoses which is accommodable for the function of impact absorption including the gait stability affect on the balanced performances of body in according to the formation and the material of foot part. Taking into account the balanced performances by using the sway velocity, the estimation and comparison of the effects on the balanced performances by each formation and material for foot orthoses was evaluated into significant values(p<0.006) in only the eye-opening posture with Firm state, In this posture, the static process performed by each foot formation reveals in order of normal foot(p<0.010), flat foot(p<0.000) and hollow foot(p<0.003) and then, on the base of each formation of foot part, the result that analyze the effects of the materials of foot orthoses on the balance performance appeared showing that soft materials is more effective on the normal foot and, on the other hand, rigid materials is more effective in balancing on flat foot and hollow foot.

• Korean Journal of Applied Biomechanics
• /
• v.26 no.4
• /
• pp.397-405
• /
• 2016

Objective: Pilates is a low/mid-intensity exercise that can be easily performed by elderly individuals as it is an individual body-oriented exercise. It is also a cardio workout that can be performed anywhere to develop strength and flexibility. Therefore, we investigated the effects of 8 week Pilates program on the balancing ability of elderly individuals. Method: The research participants were selected from elderly residents in B city. Ten individuals voluntarily signed an agreement to undergo free measurements as well as to participate in the workout program. (Height: $157.1{\pm}11.9cm$, Weight: $61.7{\pm}8.0kg$). The Pilates exercise was performed 60 minutes a day, three times a week for a total of eight weeks. The measurement variables used to test balance were the vestibular test, 5 m habitual and maximum walk test and 3 m tandem walk test. A series of paired t-test were conducted using IBM SPSS Statistics 23.0 to analyze all the research data collected in order to determine the balance ability of the participants before and after the Pilates program. Additionally, the statistically significant level for all analysis was set to ${\alpha}=.05$. Results: In the vestibular test, some meaningful changes were observed in the length envelope area (ENV) while standing on one foot, but there were no significant differences in the ENV, rectangle(REC), root mean square, and total length. Results also revealed that statistically significant differences existed in the 5 m habitual and maximum walk test, as well as the 3 m tandem walk test. Conclusion: To summarize the findings, the 8 week Pilates program employed in this study significantly improved the dynamic balance of the elderly participants. Thus, elderly individuals that frequent perform Pilates are expected to enjoy positive benefits such as increased balance and fewer falling accidents.

• Korean Journal of Heritage: History & Science
• /
• v.43 no.3
• /
• pp.102-121
• /
• 2010

Three bronze bells excavated from the Hoeamsa temple site were investigated for their microstructures and chemical compositions in an effort to understand the technology applied in fabrication, which may represent the related industry established in the early Joseon period. The result shows that the bells were cast from alloys of approximately 85% copper-8% tin-7% lead. The chemical analysis for ten trace elements shows that they were all kept below 0.3 weight %, suggesting that the alloys were made of relatively well-refined copper, tin and lead. The presence of sulfur and iron indicates that chalcopyrite or chalcocite may have been used in the smelting of copper. Evidence has been found that the bells were cast by pouring the liquid metal from the top of the sand molds that were set up in an upright position. No additional treatments, thermal or mechanical, other than a little grinding were applied upon the completion of casting. After the shaping process, a balancing plate was attached to the top of the bell using a steel connection ring. The connection assembly was then fixed to the main body by using molten bronze as a solder. The surface inscription was found carved using different techniques. The differences in the order of strokes and the calligraphic style indicate that the carving was carried out by more than one master. In the absence of documentary evidence on past bronze technology, the present bronze bells with known chronology, provenance and the main agent of production, prove to be a rare and valuable archaeological material for the understanding of the related technology in use in the early Joseon period.

• The Korean Journal of Air & Space Law and Policy
• /
• v.29 no.2
• /
• pp.3-54
• /
• 2014

The Republic of Korea enacted the Air Transport Act in Commercial Law which was entered into force in November, 2011. The Air Transport Act in Korean Commercial Law was established to regulate domestic carriage by air and damages to the third party which occur within the territorial area caused by aircraft operations. There are some problems to be reformed in the Provisions of Korean Commercial Law for the aircraft operator's liability of compensation for damages to the third party caused by aircraft operation as follows. First, the aircraft operator's liability of compensation for damages needs to be improved because it is too low to compensate adequately to the third party damaged owing to the aircraft operation. Therefore, the standard of classifying per aircraft weight is required to be detailed from the current 4-tier into 10-tier and the total limited amount of liability is also in need of being increased to the maximum 7-hundred-million SDR. In addition, the limited amount of liability to the personal damage is necessary to be risen from the present 125,000 SDR to 625,000 SDR according to the recent rate of prices increase. This is the most desirable way to improve the current provisions given the ordinary insurance coverage per one aircraft accident and various specifications of recent aircraft in order to compensate the damaged appropriately. Second, the aircraft operator shall be liable without fault to damages caused by terrorism such as hijacking, attacking an aircraft and utilizing it as means of attack like the 9 11 disaster according to the present Air Transport Act in Korean Commercial Law. Some argue that it is too harsh to aircraft operators and irrational, but given they have also some legal duties of preventing terrorism and in respect of helping the third party damaged, it does not look too harsh or irrational. However, it should be amended into exempting aircraft operator's liability when the terrorism using of an aircraft by well-organized terrorists group happens like 9 11 disaster in view of balancing the interest between the aircraft operator and the third party damaged. Third, considering the large scale of the damage caused by the aircraft operation usually aircraft accident, it is likely that many people damaged can be faced with a financial crisis, and the provision of advance payment for air carrier's liability of compensation also needs to be applied to the case of aircraft operator's liability. Fourth, the aircraft operator now shall be liable to the damages which occur in land or water except air according to the current Air Transport Act of Korean Commercial Law. However, because the damages related to the aircraft operation in air caused by another aircraft operation are not different from those in land or water. Therefore, the term of 'on the surface' should be eliminated in the term of 'third parties on the surface' in order to make the damages by the aircraft operation in air caused by another aircraft operation compensable by Air Transport Act of Korean Commercial Law. It is desired that the Air Transport Act in Commercial Law including the clauses related to the aircraft operator's liability of compensation for damages to the third party be developed continually through the resolutions about its problems mentioned above for compensating the third party damaged appropriately and balancing the interest between the damaged and the aircraft operator.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.18
• /
• pp.88-123
• /
• 1975

To obtain useful fundamental informations for improving cultural practices of barley, an investigation was made on the influences of different fertilizer level and seeding rate as well as seeding date on yield and yield components and their balancing procedure using barley variety Suwon ＃ 18, and at the same time, 8 varieties including Suwon ＃ 18 were also tested to clarify the varietal responses in terms of their yield and yield components under different seeding date at Crop Experiment Station, Suwon, during the period of 1969 and 1970. The results obtained were summarized as follows; 1. Days to emergence of barley variety Suwon ＃ 18 at Suwon, took 8 to 19 days in accordance with given different seeding date (from Sept. 21 to Oct. 31). Earlier emergence was observed by early seeding and most of the seeds were emerged at 15$0^{\circ}C$ cumulated soil temperature at 5cm depth from surface under the favorable condition. 2. Degree of cold injury in different seeding date was seemed to be affected by the growth rate of seedlings and climatic condition during the wintering period. Over growth and number of leaves less than 5 to 6 on the main stem before wintering were brought in severe cold damage during the wintering period. 3. Even though the number of leaves on the main stem were variable from 11 to 16 depending upon the seeding date. this differences were occurred before wintering and less variation was observed after wintering. Particularly, differences of the number of main stem leaves from September 21 to October 11 seeding date were occurred due to the differences of number of main stem leaves before wintering. 4. Dry matter accumulation before wintering was high in early seeded plot and gradually decreased in accordance with delayed seeding date and less different in dry matter weight was observed after wintering. However, the increment rate of this dry matter was high from regrowth to heading time and became low during the ripening period. 5. Number of tillers per $\m^2$ was higher in early seeding than late one and dense planting was higher in the number of tillers than sparse planting. Number of tillers per plant was lower in number and variation in dense planting, and reverse tendency was observed in sparse planting. By increasing seedling rate in early seeding date the number of tiller per plant was remarkably decreased, but the seeding rate didn't affect the individual tillering capacity in the late seeding date. 6. Seedlings were from early planting reached maximum tillering stage earlier than those from the late planting and no remarkable changes was observed due to increased seeding rate. However. increased seeding rate tends to make it earlier the maximum tillering stage early. 7. Stage of maximum tillering was coincided with stage of 4-5 main stem leaves regardless the seeding date. 8. Number of heads per $\m^2$ was increased with increased seeding rate but considerable year variation in number of heads was observed by increased fertilizer level. Therefore, it was clear that there is no difficulties in increasing number of heads per $\m^2$ through increasing both fertilizer level and seeding rate. This type of tendency was more remarkable at optimum seeding time. In the other hand, seeding at optimum time is more important than increasing seeding rate, but increasing seeding rate was more effective in late seeding for obtaining desirable number of heads per $\m^2$. 9. Number of heads per $\m^2$ was decreased generally in all varieties tested in late seeding, but the degree of decrease by late seeding was lower in Suwon ＃ 18. Yuegi, Hangmi and Buheung compared with Suwon ＃ 4, Suwon ＃ 6, Chilbo and Yungwolyukak. 10. Highly significant positive correlations were obtained between number of head and tillers per $\m^2$ from heading date in September 21 seeding, from before-wintering in October 1 seeding and in all growth period from October 11 to October 31 seeding. However, relatively low correlation coefficient was estimated between number of heads and tillers counted around late March to early April in any seeding date. 11. Valid tiller ratio varied from 33% to 76% and highest yield was obtained when valid tiller ratio was about 50%. Therefore, variation of valid tiller ratio was greater due to seeding date differences than due to seeding rate. Early seeding decreased the valid tiller ratio and gradually increased by delaying seeding date but decreased by increasing seeding rate. Among the varieties tested Suwon ＃ 18, Hangmi, Yuegi as well as Buheung should be high valid tiller ratio not only in late seeding but also in early seeding. In contrast to this phenomena, Chilbo, Suwon ＃ 4, Suwon ＃ 6 and Yungwolyukak expressed low valid tiller ratio in general, and also exhibited the same tendency in late seeding date. 12. Number of grains per spike was increased by increasing fertilizer level and decreased by increasing seeding rate. Among the seeding date tested. October 21 (1969) and October 11 (1970) showed lowest number of grains per spike which was increased in both early seeding and late seeding date. There were no definite tendencies observed along with seeding date differences in respective varieties tested. 13. Variation of 1000 grain weight due to fertilizer level applied, seeding date and seeding rate was not so high as number of grains per spike and number of heads per $\m^2$, but exhibited high year variation. Increased seeding rate decreased the 1000 grain weight. Among the varieties tested Chilbo and Buheung expressed heavy grain weight, while Suwon ＃ 18, Hangmi and Yuegi showed comparatively light grain weight. 14. Optimum seeding date in Suwon area was around October 1 to October 11. Yield was generally increased by increasing fertilizer level. Yield decrease due to early seeding was compensated in certain extent by increased fertilizer application. 15. Yield variations due to seeding rate differences were almost negligible compare to the variations due to fertilizer level and seeding date. In either early seeding or law fertilizer level yield variation due to seeding rate was not so remarkable. Increment of fertilizer application was more effective for yield increase especially at increased seeding rate. And also increased seeding rate fairly compensated the decrease of yield in late seeding date. 16. Optimum seeding rate was considered to be around 18-26 liters per 10a at N-P-K=10.5-6-6 kg/10a fertilizer level considering yield stabilization. 17. Varietal differences in optimum seeding date was quite remarkable Suwon ＃ 6, Suwon ＃ 4. Buheung noted high yield at early seeding and Suwon ＃ 18, Yuegi and Hangmi yielded higher in seeding date of October 10. However, Buheung showed late seeding adaptability. 18. Highly significant positive correlations were observed between yield and yield components in all treatments. However, this correlation coefficient was increased positively by increased fertilizer level and decreased by increased seeding rate. Significant negative correlation coefficients were estimated between yield and number of grains per spike, since increased number of heads per m2 at the same level of fertilizer tends to decrease the number of grains per spike. Comparatively low correlation coefficients were estimated between 1000 grain weight and yield. 19. No significant relations in terms of correlation coefficients was observed between number of heads per $\m^2$ and 1000 grain weight or number of grains per head.

• Proceedings of the Korean DIstribution Association Conference
• /
• 2002.05a
• /
• pp.31-59
• /
• 2002

Recently there are many changes of logistics environment Such as integrated logistics information system, the rapid growth of the domestic and international small package express service and third party logistics with Electronic Commerce. At this time it is very important to deliver to customers the goods sold through EC speedy, accurately and safely. That is to say, the role of small package express service is very important at EC times. The bottlenecks of small package express service in the circumstances of EC are the weakness of EC operating company and small package express service provider the shortage of distribution centre and cargo terminal, the shortage of skilled man with related small package express service etc. So, I suggested that for activation of EC it is necessary to strengthen the strategic alliances, introduce GPS and use the third party logistics positively in the side of small package express service provider. And it is necessary to prepare for the settlements of traffic problems, support the introduction of integrated logistics service, logistics information system, deregulate restriction such as weight limit of vehicles in the side of the government. And to government support throughout extending nation's SOC, deregulation, support to small package express service terminal, permit to stopping & parking in downtown, abolishing a no passing zone, permit to being employed foreigner. Also this service involves ensuring that the product will arrive when wanted, and in an undamaged condition.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.37 no.2
• /
• pp.176-182
• /
• 2017

This study was conducted to evaluate the protein requirement for maintenance of fattening Korean black goat (Capra hircus coreanae). Six male goats with average initial body weight (BW) of $31.78{\pm}4.54kg$ and an average age of 8 months were used in this study. The experiment had a replicated duplicated $3{\times}3$ Latin square design for balancing carryover effects. In the course of the experiment, each of Black goats were fed three diets that were formulated to contain T1 (13%), T2 (16%) and T3 (19%) levels of crude protein (CP). A 14-day diet adjustment period was followed by a 5-day collection period. Dry matter intake (DMI) of groups fed diets with T2 was 966.67g/d which was higher than group fed diets with T1 and T3 were 925.14g/d and 936.08g/d each. Average daily gains (ADG) of black goats were the highest in T2(167.13g/d) But, there was no significant difference. Dietary protein levels affected the apparent digestibility of CP (p<0.05). A significant difference was found in CP intake among treatments and goats receiving T3, T2, and T1 recorded 181.23, 154.57, and 128.78g CP/d, respectively. This was excepted because CP intake is proportional to CP content of diet, which from highest to lowest was as follows: T3 (19%) > T2 (16%) > T1 (13%). Intercept of the regression equation between CP intake and CP balance indicated that maintenance CP requirement was 1.63g/BW0.75.