This study was conducted to investigate the use of sugar alcohols as alternative sweeteners for replacing sucrose in sponge cake. The sponge cakes were prepared with only sucrose or a 50% replacement of sucrose with various sugar alcohols (erythritol, sorbitol, and xylitol). The specific gravity of cake batter containing only sucrose was significantly higher and the viscosity was significantly lower than those containing sugar alcohol (p<0.001). Among sugar alcohols, xylitol was the most similar to sucrose. The thermal characteristics, as assessed by differential scanning calorimetry, showed that sucrose delayed gelatinization of cake batter more than sugar alcohol, as the onset temperature and the peak temperature of cake batter containing only sucrose were higher than those containing sugar alcohol. The moisture content of cake containing sorbitol was the highest and that containing only sucrose was the lowest among cakes. The specific volume of cakes containing only sucrose and xylitol were higher and the baking loss rate of those were lower than other sugar alcohols. The volume and symmetry index of cake containing only sucrose were the highest among cakes (p<0.001), and xylitol was similar to sucrose for the above indices. The redness (a) and yellowness (b) values of crust containing only sucrose were significantly higher than those containing sugar alcohols (p<0.001). The a and b values of crumb containing erythritol were the lowest among cakes, showing a pale yellowish color. The microstructure, as assessed by scanning electron microscopy, showed that the cake containing only sucrose had more uniformly and finely distributed pores and a smoother cross section than that containing sugar alcohols. Cake containing xylitol was similar to cake containing only sucrose. Hardness, chewiness, and gumminess of cake containing only sucrose were higher than those containing sugar alcohols, whereas the adhesiveness of cakes containing sugar alcohols were higher than those containing only sucrose (p<0.01). Among sugar alcohols, xylitol was the most similar to sucrose in textural properties. In a sensory quality test, the tenderness and moistness of cakes containing sorbitol and erythritol were higher than those containing only sucrose and xylitol. The overall acceptance of cakes containing xylitol and only sucrose were higher than those containing sorbitol and erythritol (p<0.001). Thus, xylitol is more appropriate as a 50% replacement for sucrose than erythritol and sorbitol when preparing sponge cake.
This study investigates the quality characteristics of dough and bread added with 6% chestnut shell powder and extruded chestnut shell powder at various conditions. As extrusion process variables, melt temperature ($110^{\circ}C$, $130^{\circ}C$, $150^{\circ}C$) and moisture (25% and 30%) were controlled. Total dietary fiber content was slightly increased in extruded chestnut shell powder group. In the farinogram, absorption was significantly increased in the group of 25% moisture content and 30% moisture content (p<0.05). After 2 hours and 3 hours, the leavening heights of dough for control showed a similar tendency to that of dough with extruded chestnut shell at a melt temperature $150^{\circ}C$ and with moisture content of 25% and 30%. Specific volume was the highest at a control of $3.74{\pm}0.08cc/g$ and extruded chestnut shell powder group was slightly higher than the chestnut shell powder group. Firmness after 1 day on control of $107.42{\pm}14.52g$ was similar to that of the bread with extruded chestnut shell at a temperature of $150^{\circ}C$ and moisture content of 25% for $113.33{\pm}6.17g$. In conclusion, the extrusion-cooking of chestnut shell powder improved the quality characteristics of dough and bread. The optimum combinations of conditions in tested range were melt temperature at $150^{\circ}C$ and moisture content at 25%, and melt temperature at $130^{\circ}C$ and moisture content at 30%.
The long term stability of ion current of QMS has been one of key parameters for monitoring gas process in vacuum. The time dependence of ionic current was monitored while the pressure of nitrogen gas was kept at a fixed pressure by introducing the gas into vacuum chamber. The chamber was evacuated to ${\sim}3{\times}10^{-9}\;Torr$ to reduce background signals before the measurement. Two ion sources were tested; one had brownish or black color due to gas contamination and the other one was new, i.e. cleaner. At a nitrogen pressure of $1{\times}10^{-5}\;Torr$, the ionic currents measured by the contaminated ion source decreased faster with time. The decrease rate was respectively ${\sim}46%$ for cleaner one and ${\sim}84%$ for contaminated one after ${\sim}5.5%$ hours. In order to test the effect of filament material on the ion current decrease, we fabricated a tungsten(W) filament which consisted of two parts; one half was made of W and the other was coated with yttria. The similar decrease of ionic currents were shown for the two types of filaments, indicating that slight change of temperature of filament due to material difference i.e. baking effect could not improve the origin of ionic current decrease. Overall the decreasing rate of ionic current is more closely associated with contaminated ion source of QMS rather than its filament materials.
The reological properties of doughs blended with cereal flours were investigated in the study. The doughs were prepared of wheat flours mixed with 10%, 20%, 30% and 40% ratio of rice flour, waxy-rice flour, brown-rice flour and soybean flour. Amylogram, farinogram, extensogram and SEM were used to measured thier special properties with graphs and photos. The results were obtained as followes; 1. Wheat dough formation after fermantation, showed "stringing" structure of small starch granules on the SEM photo. But the large starch granules contributed little to the structure formation in rice flours dough, and played relatively a little role in the structure formation of blended doughs of waxy-rice, brown-rice and soy- bean flours. 2. The absorption of flour composited rice and brown-rice, was lower than that of the control by Farinograph. It was decreased the farinograph absorption with the increase of replacement ratio of cereal flours. Dough development time of cereal blended flours decreased, but that time of waxy-rice and brown-rice were very similiar. Farinograph stability of rice, waxy-rice, brown-rice and soybean blended flours, had shorter than that of wheat-flour. 3. The results showed that cereal blended flours decreased the resistance to extention (elasticity) without affecting the extensibility in fermented dough by Extensograph. 4. The gelatinization temperature of wheat, rice, waxy-rice, and brown-rice were 55.0$^{\circ}C$, 64.0$^{\circ}C$, 58.0$^{\circ}C$ and 61.0$^{\circ}C$. But that of all cereal blended flours showed 58.0$^{\circ}C$ except 20% or 30% soybean blended flours. According to the amylogram, each maximum viscosity of rice flour and wheat flour was 1760 B.U.,760 B.U.. Soybean composite flours had significantly lowe. amylograph peak viscosity (300 B.U.) than that of the other composite flours (450 B.U.-1100 B.U.).
The purpose of this study was to investigate the influence of the additive chitosan on the storage characteristics and quality attributes of sponge cake. In addition to a control sample with no chitosan, sponge cake was prepared with the addition of various concentrations of chitosan (1,000, 2,000 and 3,000 ppm), and stored for 5 days at three temperatures ($5^{\circ}C$, $15^{\circ}C$ and $25^{\circ}C$). The control sample demonstrated considerable hardness compared to other samples containing chitosan regardless of storage temperature and period. The degree of retrogradation of the samples containing chitosan was higher than that of the control samples, with values under 30% regardless of the concentration of chitosan or storage condition. The total color variance(E) of the control sample and the samples with chitosan did not show a significant difference. The overall acceptability of the samples containing 1,000 ppm chitosan was similar to the control sample.
This study explores the quality characteristics of white pan bread added with perilla leaf powder, and the results are as follows. The WRC(water retention capacity) of PLP (perilla leaf powder) added to the bread dough increased as the addition increased, and the initiation temperature during the rapid visco analysis (RVA) increased with more additions, showing significant differences. The highest and the lowest viscosity of the sample decreased as the powder added increased. The brightness(L value) of the bread without the powder was the highest, and the redness (a value) and the yellowness (b value) showed significant differences among the samples. Hardness increased showing significant differences among the samples as the powder added increased Chewiness was the highest but preference value was the lowest in the sample with 7% of the powder. The lowest score was shown in the color of the sample with the most PLP added. Flavor was the lowest of 4.93 in the comparison sample without the leaf powder added while bitter taste scored the highest of 5.21 in the sample of 3% powder added. It was also the highest in overall acceptance while the sample with the most powder showed the lowest of 4.03. From these results, it can be said that the preference of bread with PLP seems to decrease when more than 5% of PLP is added.
Kim, Kyung-Bum;Jo, Bun-Sung;Lee, Ju-Yeong;Park, Ki-Tae;An, Bong-Jeun;Lee, Sun-Ho;Cho, Young-Je
Journal of Applied Biological Chemistry
/
v.55
no.4
/
pp.207-215
/
2012
Phenolic compounds of $17.9{\pm}1.0mg/g$ were extracted from Ulmus pumila with 70% ethanol. The elastase inhibitory activity related with forming wrinkle was shown an excellent wrinkle improvement effect in 70% ethanol extracts as 55.5-69.5% at phenolic concentration of $50-200{\mu}g/mL$. The tyrosinase inhibitory activity related with skin-whitening was 24% in 70% ethanol extracts at phenolic concentration of $200{\mu}g/mL$. The astringent activity of 70% ethanol extracts was shown activity of 71% at phenolic concentration of $200{\mu}g/mL$ therefore it is judged that there is a high effect on pores reduction of the skin. The hyaluronidase inhibitory activity of U. pumila extracts was confirmed anti-inflammation effect of 80% at phenolic concentration of $50{\mu}g/mL$. Antimicrobial activity of U. pumila water extracts was shown each 8.7, 10.0, 11.1 and 11.8 mm clear zones on Propionebacterium acnes at phenolic concentration of $50-200{\mu}g/mL$. The stability of the multi-functional cosmetic (lotion) added U. pumila extracts was very stable for 28 days without changing of pH and viscosity also it's stable on temperature and sun lights. As the concentration of extracts was increased, the color of lotion was getting dark, but the sensory evaluation was high at score of 8.5.
Song Ki Cheol;Mok Jong Soo;Kang Chang Su;Chang Soo Hyun
Korean Journal of Fisheries and Aquatic Sciences
/
v.35
no.3
/
pp.247-252
/
2002
To prepare the edible film based on fish protein, the optimal conditions for extracting soluble protein from Alaska pollack ( Theragra chalcogramma) and mackerel (Scomber japonious) muscle were defined. The effects of protein concentration, pH and temperature of protein solution on the physical properties of films were also investigated, Contents of moisture, crude protein, crude lipid and ash in Alaska pollack muscle were 79.6, 18.2, 0.6 and $1.2\%$, respectively. Contents of moisture, crude protein, crude lipid and ash in mackerel muscle were 69,1, 20.1, 9,5 and $1.3\%$, respectively. Both soluble protein contents extracted from Alaska pollack and mackerel were the highest at pH 12.0, and then un 2.0, 11.0. But they were extracted a little at neutral range. forward the recovery yield of protein by controlling isoelectric point was the highest at pH 4.8 ($79.8\%$) for Alaska pollack and at pH 5.0 ($64.1\%$) for mackerel, For the preparation of protein films from both Alaska pollack and mackerel, the most effective conditions of film forming solution were achieved, after supplied fish protein 4 g (glycerol 1,6 g) in 100 mL of distilled water, by adjusted to pH 10.0 and then heated at $90^{\circ}C$.
Lee, Moon Jo;Kim, Sang Eun;Kim, Jong Hwan;Lee, Sang Won;Yeum, Dong Min
Journal of the Korean Society of Food Science and Nutrition
/
v.42
no.2
/
pp.255-261
/
2013
This study investigated changes in the physicochemical characteristics and coffee flavors of coffee beans under different roasting conditions. Four different kinds of roasted coffees were analyzed using a headspace gas chromatographic technique. The moisture content and total acidity of roasted coffee decreased whereas the pH and weight loss (%) increased, as coffee beans were roasted at higher temperatures. The Hunter's color values of the roasted coffee (indicating L (lightness) and b (yellowness)) decreased as the roasting temperature of the coffee beans increased, but a (redness) value only increased with light roasting. We also noted that the color of the Arabica coffee was darker than that of the Robusta coffee. The aroma compounds, acetaldehyde, acetone, 2-methylfuran, 2-methylbutanol, 2-methylpyrazine, furfural, 2-propanone, furfuryl alcohol, 2,5-dimethylpyrazine and furfuryl acetate were mainly analyzed. A sensory evaluation of all light-roasted coffees had flavor and sourness and those of all medium-roasted coffees had heaviness and finishness.
The breadmaking characteristics of composite flour containing 30% of buckwheat and 70% of wheat with the addition of vital wheat gluten and water-soluble gums, were studied to establish the optimum formula for the development of buckwheat bread. The addition of vital wheat gluten or/and gums led to successful formation of buckwheat bread, giving loaf volume increase and improvement of sensory quality, especially texture determined by QDA (Quantitative Descriptive Analysis). Among those additives, xanthan gum showed the best volume expansion. Synergistic effects on bread quality were observed when the vital wheat gluten and xanthan gum or guar gum were used together. As buckwheat flour was substituted for wheat flour, gelatinization started early and the maximum viscosity increased measured by an amylography. The addition of gluten and gums caused the initial gelatinization to occur at a higher temperature and maximum viscosity to decrease.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.