• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.05a
• /
• pp.322-325
• /
• 2007

Dent resistance is an important characteristic to avoid damage on automotive outer panels. From a practical point of view, dents can be caused in a number of ways. Considering doors as an example, denting can occur from stone impacts or from the careless opening of an adjacently parked vehicle door. Denting can occur where the door surface is smooth and may not have sufficient curvature to resist dent. These exterior body parts are designed to improve dent resistance using a combination of work hardening and bake hardening. In brief, dent is affected by the shape of the parts and the material properties such as yield strength, strain and thickness. In this work, forming of door outer panel is investigated by Taguchi method. Main parameters are yield strength, thickness, blank size, blank holding force and so on. For the given value of design parameters, forming analysis of the thirty six cases are carried out according to L18 orthogonal array. After comparing the performance by simple conversion of simulation results into dent resistance, the final suggestion of the forming parameters is verified for the best improvement of dent resistance.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.17 no.5
• /
• pp.468-476
• /
• 2005

The purpose of this study is to investigate actual air quality in newly-constructed multi-family houses and to improve Indoor Air Quality (IAQ). The field measurement was conducted in four different newly-constructed multi-family house complexes in Seoul and one existing multi-family house complex in Kyong-gi province. The result of the measurement shows that indoor concentrations of Formaldehyde and TVOC in newly-constructed multi-family houses are much higher than the foreign standards. To establish a proper process for reducing indoor air pollutants, various experiments have been conducted; application of natural materials, bake-out practice, closure of all openings without ventilation, and use of mechanical ventilation system. The result indicates that three practices (natural materials, bakeout, mechanical ventilation) can reduce the level of indoor air pollutants almost in half during the experiments. However, each practice has its limitation and is insufficient to satisfy IAQ standards. Therefore, the study proposes a proper reduction process of indoor air pollutants which combines four different practices in time sequence.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.18 no.6
• /
• pp.468-476
• /
• 2006

The paper deals with the numerical analysis of contaminants emission from the material affected by temperature variation in floor heating system. Considering mass transfer and heat transfer theories, a computer program for the analysis of VOCs emission was made. To demonstrate the accuracy of the numerical solution, the prediction results and the measured data were compared. Using this program, emission rates of the materials in the bakeout space and the no bake-out space were compared to estimate the variation of emission rate.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.241-241
• /
• 2010

적외선 센서는 빛의 유무에 관계없이 물체 또는 인체에서 발산하는 적외선을 감지한다. 이러한 센서를 전자 및 디스플레이 시스템과 연동하면 열영상 시스템이 되는데, 이는 전방 감시, 플랜트 감시, 보안, 방범용으로 많이 사용되며, 특히 자동차 야간 운전자 보조용으로 사용되어 최첨단, 고부가가치를 지니고 있는 핵심부품이다. 비냉각형 적외선 센서인 마이크로볼로미터는 상온에서 작동하므로 극저온 Cooler가 불필요하며, 무게와 부피가 작아 각종 시스템에 부착가능하다. 특히 볼로미터형 적외선 센서는 용량이 적은 TE cooler로 상온으로 안정화를 시키며, 진공으로 유지되는 금속 또는 세라믹 패키지를 사용하게 된다. 본 연구에서는 마이크로 볼로미터용 진공패키지를 제작하여 패키지 조립 및 측정기술에 대해 조사하였다. 패키지는 금속재질인 kovar를 사용하여 제작되었고, 내부에 TE Cooler와 장수명 진공유지를 위한 getter, 그리고 온도센서 및 볼로미터 센서 칩을 장착하여 조립하였다. 패키지 Cap ass'y와 base envelop의 솔더링 공정은 약 $200^{\circ}C$에서 수행하였으며, evacuation system을 이용하여 5일 동안 패키지 bake-out 공정을 수행하였다. 이 후 getter를 활성화시키고, seal-off 공정으로 진공 기밀을 유지하였다. 진공 패키지의 기밀성은 $6{\times}10^{-9}\;std.cm^3/sec$로 기밀성을 유지하였다. 볼로미터 센서의 반응도는 $10^2\;V/W$ 이상을 나타내었으며, 탐지도는 $2{\times}10^8\;cm-Hz^{1/2}/W$를 나타내었다.

• Transactions of Materials Processing
• /
• v.16 no.4 s.94
• /
• pp.254-259
• /
• 2007

Dent resistance is an important characteristic to avoid damage on automotive outer panels. From a practical point of view, dents can be caused in a number of ways. Considering doors as an example, denting can occur from stone impacts or from the careless opening of an adjacently parked vehicle door. Denting can occur where the door surface is smooth and may not have sufficient curvature to resist dent. These exterior body parts are designed to improve dent resistance using a combination of work hardening and bake hardening. In brief, dent is affected by the shape of the parts and the material properties such as yield strength, strain and thickness. In this work, forming of door outer panel is investigated by Taguchi method. Main parameters are yield strength, thickness, blank size, blank holding force and so on. For the given value of design parameters, forming analysis of the eighteen cases are carried out according to L18 orthogonal array. After comparing the performance by simple conversion of simulation results into dent resistance, the final suggestion of the forming parameters is verified for the optimal improvement of dent resistance.

• Journal of Food Hygiene and Safety
• /
• v.28 no.2
• /
• pp.158-167
• /
• 2013

This study was carried out to assess the safety of cereals and their products (20 species, 205 samples) distributed in Gyeonggi province by analyzing contamination levels such as exposure frequency of Aflatoxins and Deoxynivalenol (DON). Aflatoxins were detected in 16 (8%) samples in total with a range of 0.01~27.88 ${\mu}g/kg$, including 3 of 9 bake flour (33%), 2 of 6 dried corn (33%), 3 of 12 frying flour (25%) and 2 of 11 sorghum (18%). DON was found in 56 (27%) samples including 11 of 13 adlay (85%), 6 of 8 wheat (75%), 6 of 10 processed corn for popcorn (60%), 6 of 11 sorghum (55%) and 7 of 16 barley (44%) with a range of 2.2~754.4 ${\mu}g/kg$. In particular, both Aflatoxins and DON were detected in 8 samples (2 millet, 2 wheat, 1 sorghum, 1 adlay, 1 dried corn, 1 bake flour) simultaneously. As a result of this study, we found that an adult is exposed to Aflatoxins of $0.80({\times})10^{-3}{\mu}g/kg$ b.w./day and DON of 0.18 ${\mu}g/kg$ b.w./day. The quantity of exposure to DON amounted to 18.5 percentage level compared with PMTDI 1 ${\mu}g/kg$ b.w./day suggested on JECFA, therefore we can assess that the possibility of health risks by intake cereals distributed in Gyeonggi province is low. However the concentration of Aflatoxins in one dried corn was 27.88 ${\mu}g/kg$ which was over the maximum residue limits (MRL) suggested on internal and external level, the monitoring about mycotoxin should be conducted on continuously.

• Journal of the Microelectronics and Packaging Society
• /
• v.7 no.3
• /
• pp.45-54
• /
• 2000

The effect of electropolishing far stamped leadframe on the removal of the edge burr and residual stress relief was examined. The present study showed that the electropolishing could be used for enhanced surface quality of stamped leadframes. The electropolishing was performed at the condition of 60% phosphoric acid electrolyte, 5 ampere of current and 3 cm electrode gap at $70^{\circ}C$ for 2 minutes for Alloy42 type leadframe, and $50^{\circ}C$ for 1.5 minutes for C-194 type leadframe. The FWHM values from X-ray diffraction showed that residual stress of electropolished leadframe recovered to the level of as-received raw materials and surface roughness measured by using AFM tuned out to be improved by 0.079 $\mu\textrm{m}$ and 0.014 $\mu\textrm{m}$ ($R_{rms}$) far alloy 42 and C-194 type leadframes, respectively. The plated thickness using XRF showed the improved uniformity in thickness variation by 0.4~0.5 $\mu\textrm{m}$ and grain growth, which is favorable for interface adhesion, was also observed from the bake test samples. We could certify dimensional stability of leadframe with inspection by means of 3D-topography and hardness measurements.

• Journal of Applied Tourism Food and Beverage Management and Research
• /
• v.14 no.2
• /
• pp.95-119
• /
• 2003

Case Study about the management of bakery menu through a menu analysis: This study checked the sales of bakeries this researcher has operated for 4 weeks before evaluating the menu with Kasavana & Smith Analysis, changing the position of the menu on the theoretical base of space composition and then checking the sales for 4 weeks again and analyzing in the same way. The study compared the two groups by using the menu analysis. The menu used in the analysis included 31 items produced in the stores and 29 items turned out from the headquarters. The results of the menu evaluation through Kasavana & Smith Analysis are as follows: (i) before changing the position of the menu 22 Stars, 20 Puzzles, 15 Plowhorses, 13 Dogs (ii) after changing the position 18 Stars, 24 Puzzles, 12 Plowhorses, 6 Dogs During the study, it was inconvenient that many things not thought about before were discovered. The limitations of the study are as below: a) when the displayed items were sold out, they couldn't be supplied continuously. The items from the headquarters were supplied as many as the ordered volume. As the stores prepared materials only for the day, they only produced bakeries as many as the dairy target. So it is difficult for them to keep extra bakery. b) it is natural that a new item make the sales of the existing items cut down. During the study, there appeared a new item, which influenced on the sales. c) as the store this researcher manages is smaller than the others, it was difficult to change all the position of the menu. With only 18 items changing their positions, there couldn't obtain more accurate data. d) because of the franchise contract, there fixed the prices of supply and sale. Therefore the price of Plowhorse couldn't be changed. However on the base of this study, it can search more specific ways to efficiently manage the bakery business in the future.

• Land and Housing Review
• /
• v.6 no.4
• /
• pp.231-237
• /
• 2015

Recently, It has been much interest in modular housing construction. so, The purpose of this study was to investigate the characteristics of the indoor air quality in modular mock-up housing. We measured indoor air quality(formaldehyde, benzene, toluene, ethylbenzene, xylene, styrene) of two modular mock-up units that built-in furniture is installed and uninstalled. As a result, the pollutants of built-in furniture installed unit were emitted more than built-in furniture uninstalled unit. But after bake-out and ventilation, emission concentrations of two modular mock-up units were similar and were below Indoor Air Quality recommendation standards. Built-in furniture is likely to affect the emission concentration of toluene

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.27 no.3
• /
• pp.306-313
• /
• 1994

In order to estimate the degree of genetic divergence between the two types of finespotted flounder, Pleuronichthys cornutus which is important commercially in Japan, isozyme analysis was carried out by starch gel electrophoresis. Twenty two loci coding for fourteen enzymes were scored in two types of finespotted flounder and three completely divergent loci (Acp, Idh-2 and Mdh-2), with no common alleles, were observed between these two types. Nei's genetic distance between two types was 0.46592. However, the expected average heterozygosity was 0.120 in type A (Hon meitagarei) and 0.095 in type B (Bake meitagarei) These results mean that the existence of two types of finespotted flounder was established in this study which may have had genetic divergence and the divergence time of these two types may have been about $2.3{\times}10^6$ years ago.