• Journal of the korean Society of Automotive Engineers
• /
• v.12 no.1
• /
• pp.40-48
• /
• 1990

Bake hardenability of batch annealed steel sheets is investigated in connection with the amount of tensile deformation and the bake hardening condition. This study associates with the method for producing bake hardening materials by means of batch annealing process and for measuring bake hardenability which is not yet fully established. The experimental result demonstrates the relationship between strain distribution and bake hardening behavior in various bake hardening conditions, which provides an essential information for automobile design and related sheet metal forming in a press shop. The result also shows the bake hardenability of the tested material increases as the baking temperature is increased from 150.deg. C. The result assures the bake hardening materials can guarantee reasonably high strength as well as good uniformity in yield strength for the automobile body by sheet metal forming process.

• Aerospace Engineering and Technology
• /
• v.2 no.2
• /
• pp.45-49
• /
• 2003

A Bake-Out test for STSAT-1 FM(Flight Model) was performed in a Bake-Out Chamber at SITC(Satellite Integration & Test Center) in KARI(Korea Aerospace Research Institute). The purpose of this test is to measure and analyze the outgassing rate to affect the optical equipment(FIMS) and to eliminate contaminants through the high temperature bake-out. This Bake-Out test is composed of three parts which are honeycomb panels & harnesses(Batch 1), an assembled satellite(Batch 2), and a disassembled satellite(Batch 3). For each test, quantitative and qualitative measurements and analysis were performed using TQCM(Thermoelectric Quartz Crystal Microbalance) and RGA(Residual Gas Analyzer.)

• Korean Journal of Metals and Materials
• /
• v.49 no.3
• /
• pp.203-210
• /
• 2011

Bake hardening steels have to resist strain aging to prevent the yield strength increment and stretcher strain during press process and to enhance the bake hardenability during baking process after painting. The bake hardening steels need to control the solute carbon and the solute nitrogen to improve the bake hardenability. Ti and/or Nb alloying for nitride and carbide precipitation and low carbon content below 0.003% are used to solve strain aging and formability problem for automotive materials. However, in the present study, the effect of micro-precipitation of copper sulfide on the bake hardenability and fatigue properties of extremely low carbon steel has been investigated. The bake hardenability of Cu-alloyed bake hardening (Cu-BH) steel was slightly higher (5 MPa) than that of Nb-alloyed bake hardening (Nb-BH) steel, but the fatigue limit of Cu-BH steel was far higher (45 MPa) than that of Nb-BH steel. All samples showed the ductile fracture behavior and some samples revealed distinct fatigue stages, such as crack initiation, stable crack growth and unstable crack growth.

• Journal of environmental and Sanitary engineering
• /
• v.11 no.3
• /
• pp.79-84
• /
• 1996

In order to determine the content of heavy metal in common salts, 35 bay salt samples, 7 refined salt samples, 7 fine salt samples, 5 bake salt samples and 5 bamboo bake salt samples were collected from old market in major cities. Heating bay salt 35 samples, it made heating bay salt of $500^{\circ}C$, /TEX>(34 samples), heating bay salt of $1000^{\circ}C$(35 samples). These were analysed for contents of lead(Pb), cadmium(Cd), iron(Fe) and zinc(Zn) by atomic absorption spectrophotometer. The results were as follows : Mean content of lead in bay salts was $0.124{\pm}0.035ppm$ refined salt was $0.130{\pm}0.019ppm$, fine salt was $0.073{\pm}0.036ppm$ bake salt was $0.097{\pm}0.023ppm$, bamboo bake salt was $0.117{\pm}0.020ppm$, heating bay salt was $0.063{\pm} 0.021ppm$ in $500^{\circ}C$, heating bay salt was $0.063{\pm}0.039ppm$ in $1000^{\circ}C$. And bay salt refined salt bamboo bake salt were not significant one another. Mean content of cadmium in bay salts was $0.031{\pm}0.008ppm$ refined salt was $0.032{\pm}0.003ppm$, fine salt was $0.037{\pm}0.005ppm$, bake salt was $0.169{\pm}0.117ppm$ bamboo bake salt was $0.079{\pm}0.052ppm$, heating bay salt of $500^{\circ}C$ was $0.030{\pm}0.029ppm$ heating bay salt of $1000^{\circ}C$ was $0.017{\pm}0.013ppm$. And bay salt refined salt, fine salt were not significant one another. Mean content of iron in bay salts was $1.025{\pm}0, 634ppm$, refined salt was $0.359{\pm}0.163ppm$ fine salt was $0.267{\pm}0.068ppm$, bake salt was $2.929{\pm}1.963ppm$, bamboo bake salt was $5.378{\pm}3.676ppm$, heating bay salt of $500^{\circ}C$ was $0.847{\pm}0.315ppm$ heating bay salt of $1000^{\circ}C$ was $0.991{\pm}0.868ppm$. And bay salt refined salt, fine salt, bake salt, bamboo bake salt were significant one another(p<0, 01). Mean content of zinc in bay salts was $0.253{\pm}0.154ppm$, refined salt was $0.263{\pm}0.091ppm$ fine salt was $0.187{\pm}0.015ppm$, bake salt was $0.166{\pm}0.034ppm$, bamboo bake salt was $0.282{\pm}0.064ppm$, heating bay salt of $500^{\circ}C$ was $0.253{\pm}0.085ppm$, heating bay salt of $1000^{\circ} C$ was $0.242{\pm}0.179ppm$. And bay salt refined salt fine salt, bake salt, bamboo bake salt were not significant one another.

• Proceeding of Spring/Autumn Annual Conference of KHA
• /
• 2004.11a
• /
• pp.319-322
• /
• 2004

The purpose of this study is to evaluate the reduction effect of bake out on the concentration of indoor air pollutants by measuring the concentration of indoor pollutants(VOCs, HCHO) after the bake out. As a result of the study, bake out was considerably effective in reducing the concentration o( indoor air pollutants, showing relatively high reduction ratio around 40${\sim}$56%. However, continuous attention and control after the bake out is required for the prevention of the rise of the concentration by subsequent emission.

• Korean Journal of Materials Research
• /
• v.30 no.6
• /
• pp.315-320
• /
• 2020

This study deals with the yielding behavior and strain aging properties of three bake hardening steels with dual-phase microstructure, fabricated by varying the annealing temperature. Bake hardening and aging tests are performed to examine the correlation of martensite volume fraction with yielding behavior and strain aging properties of the bake hardening steels with dual-phase microstructure. The volume fraction of martensite increases with increasing annealing temperature. Room-temperature tensile test results show that the yielding behavior changes from discontinuous-type to continuous-type with increasing volume fraction of martensite due to higher mobile dislocation density. According to the bake hardening and aging tests, the specimen with the highest fraction of martensite exhibited high bake hardening with low aging index because solute carbon atoms in ferrite and martensite effectively diffuse to dislocations during the bake hardening test, while in the aging test they diffuse at only ferrite due to lower aging temperature.

• Journal of the Korean Wood Science and Technology
• /
• v.40 no.2
• /
• pp.101-109
• /
• 2012

Wood composites are a hygroscopic material and have ability to exchange its moisture content with air. This study investigated the formaldehyde emission and moisture content change of four wood composites (particleboard (PB), medium density fiberboard (MDF), high density fiberboard (HDF), laminated HDF (L-HDF)) as a function of bake-out temperature and time. The composites were baked out for 1, 3, 5, 7, 10, 14, 21, and 28 days at temperatures of $20{\pm}2$, $35{\pm}2$, and $50{\pm}2^{\circ}C$ in a dry oven. The moisture content change was used to determine the emission bake-out of the composites. Best bake-out time results were obtained with after 7 days all composites. Formaldehyde emission values of composites decreased with decreasing moisture content for both temperatures. The formaldehyde emission results of bake-out temperature 35 and $50^{\circ}C$ showed a similar tendency.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1994.11a
• /
• pp.54-58
• /
• 1994

H$_2$ bake and GeH$_4$ clean are used as a in-situ pre-clean method in low temperature Si based epitaxial growth technology using rapid thermal processing chemical vapor deposition (RTPCVD). In this paper, the H$_2$ bake and GeH$_4$ clean processes are optimized for low surface defect density using Taguchi method. In H$_2$ bake process, the epitaxial growth temperature affects dominantly on the surface defect density, and the next affecting factors are H$_2$ bake temperature and rinse time in de-ionised water. In GeH$_4$ clean process, GeH$_4$ clean temperature affects most strongly on the surface defect density, and the minor factor is GeH$_4$flow rate. The optimum process conditions predicted fly Taguchi method agree well with tile experimental data in both in-situ clean processes.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.18 no.4
• /
• pp.335-343
• /
• 2006

Indoor air pollution has been significantly aggravated due to hazardous pollutants emitted from petrochemical finishing materials in new apartments. Pollutants emitted into indoor environment have significant effects on the health of occupants, causing undesirable symptoms related to sick building syndrome such as headache, dizziness, difficulty in concentration, etc. Therefore, this paper attempted to investigate the reduction effect of bake out on VOCs emission in new apartments. Experiments were carried out in three households, one of which was naturally ventilated. The naturally ventilated showed the lowest indoor pollutant concentration and also showed the highest reduction rate by the use of bake out. The most desirable result was observed when the household was naturally ventilated after bake out. More detailed experiments are expected to be carried out afterwards on the prediction of reduction rate of each pollutant.

• Korean Journal of Metals and Materials
• /
• v.49 no.6
• /
• pp.448-453
• /
• 2011

Pre-aging heat treatment after solution heat treatment (SHT) of Al-0.4 wt%Mg-1.2 wt%Si-0.1 wt%Mn alloy sheets for auto-bodies was carried out to investigate the effect of pre-aging and its conditions on the bake-hardening response. Mechanical properties were evaluated by a tensile and Vickers hardness test. Microstructural observation was also performed using a transmission electron microscope (TEM). It was revealed that pre-aging treatments play a great role in the bake-hardening response. In addition, it was found that the sphere-shaped nanosized clusters that can directly transit to the needle-shaped ${\beta}$" phase during the paint-bake process, not being dissolved into the matrix, are formed at 343 K. The result, reveals that the dominant factor of the bake-hardening response is the pre-aging temperature rather than the pre-aging time.