• Journal of Environmental Science International
• /
• v.23 no.12
• /
• pp.2045-2056
• /
• 2014

In this study, pressure drop was measured in the pulse jet bag filter without venturi on which 16 numbers of filter bags (Ø$140{\times}850{\ell}$) are installed according to operation condition(filtration velocity, inlet dust concentration, pulse pressure, and pulse interval) using coke dust from steel mill. The obtained 180 pressure drop test data were used to predict pressure drop with multiple regression model so that pressure drop data can be used for effective operation condition and as basic data for economical design. The prediction results showed that when filtration velocity was increased by 1%, pressure drop was increased by 2.2% which indicated that filtration velocity among operation condition was attributed on the pressure drop the most. Pressure was dropped by 1.53% when pulse pressure was increased by 1% which also confirmed that pulse pressure was the major factor affecting on the pressure drop next to filtration velocity. Meanwhile, pressure drops were found increased by 0.3% and 0.37%, respectively when inlet dust concentration and pulse interval were increased by 1% implying that the effects of inlet dust concentration and pulse interval were less as compared with those changes of filtration velocity and pulse pressure. Therefore, the larger effect on the pressure drop the pulse jet bag filter was found in the order of filtration velocity($V_f$), pulse pressure($P_p$), inlet dust concentration($C_i$), pulse interval($P_i$). Also, the prediction result of filtration velocity, inlet dust concentration, pulse pressure, and pulse interval which showed the largest effect on the pressure drop indicated that stable operation can be executed with filtration velocity less than 1.5 m/min and inlet dust concentration less than $4g/m^3$. However, it was regarded that pulse pressure and pulse interval need to be adjusted when inlet dust concentration is higher than $4g/m^3$. When filtration velocity and pulse pressure were examined, operation was possible regardless of changes in pulse pressure if filtration velocity was at 1.5 m/min. If filtration velocity was increased to 2 m/min. operation would be possible only when pulse pressure was set at higher than $5.8kgf/cm^2$. Also, the prediction result of pressure drop with filtration velocity and pulse interval showed that operation with pulse interval less than 50 sec. should be carried out under filtration velocity at 1.5 m/min. While, pulse interval should be set at lower than 11 sec. if filtration velocity was set at 2 m/min. Under the conditions of filtration velocity lower than 1 m/min and high pulse pressure higher than $7kgf/cm^2$, though pressure drop would be less, in this case, economic feasibility would be low due to increased in installation and operation cost since scale of dust collection equipment becomes larger and life of filtration bag becomes shortened due to high pulse pressure.

• Journal of Korean Society for Atmospheric Environment
• /
• v.23 no.2
• /
• pp.203-213
• /
• 2007

Numerical analysis has been performed to understand flow characteristics in the reactor with bag filters in an integrated adsorption/catalytic process which can treat dioxin and $NO_{x}$ together. Computational fluid dynamics technique was employed with Euler-Lagrangian model to consider flue gas and activated carbon particles simultaneously, so that residence time of flue gas and activated carbon particle could be obtained from the numerical analysis directly. The numerical analysis has been performed with different three particle sizes and compared each flow characteristics with particle's size. Fundamental flow patterns of flue gas and activated carbon particles, pressure distribution, residence time of flue gas and activated carbon particles, and distribution of activated carbon have been obtained from the numerical analysis. Flow patterns of flue gas and activated carbon particles in the reactor were very complicated and they moved along very various paths. Therefore, their residence time in the reactor was also various. The results obtained would be effectively used to estimate the removal efficiency in the reactor once the residence time is combined with the reaction equation.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.31 no.5
• /
• pp.425-434
• /
• 2007

An integrated adsorption/catalytic process has been considered to treat dioxin and $NO_x$ simultaneously. The process consists of a cyclone and a reactor with nine bag filters. In this study, numerical analysis has been performed to understand flow characteristics with inflow-duct types in the reactor. To consider flue gas and activated carbon particles simultaneously, Euler-Lagrangian model was employed. Fundamental flow patterns of flue gas and activated carbon particles, pressure distribution and distribution of activated carbon have been obtained from the numerical analysis. Also trace length and residence time of flue gas, residence time of activated carbon particles have been calculated directly. Flow patterns of flue gas and activated carbon particles in the reactor were very complicated and they moved along very various paths. Therefore, their residence time in the reactor was also various. The flow characteristics in the reactor were strongly influenced by inflow-duct types. The results obtained would be effectively used to estimate the removal efficiency in the reactor once the residence time is combined with the reaction equation.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1995.03a
• /
• pp.113-134
• /
• 1995

GORE-TEX MEMBRANE은 PTFF(POLYTETRA FLUOROETHYLENE)를 특수가공하여 극히 미세한 구조를 가지는 연속다공질체로 만들어 습,건식용 산업용 여과재로써 활용하므로써 그동안 사용되어오던 종래의 심층여과방식의 여과포로서는 도저히 이룰 수 없었던 표면여과기능을 갖춤에 따라 높은 집진효율이나 낮은압력손실로 동시에 운전을 가능하게한 새로운 기능의 첨단여과포로써 각종산업분야에 이미 널리 적용되고 있다. 근래 BOILER, 소각로, 제철, 제강용로등의 고온용 BAG FILTER 소요가 증가됨에 따라 보다 효율적이고 경제적인 고온용 여과포에 대한 관심이 높아지고 있으며, 특히, 소각로, 발전설비, CEMENT 생산공정중 KILN 공정등에 주로 사용되어오던 전기 집진기 (ELECTROSTATIC PRECIPITATOR)의 집진효율이 DIOXINE 이나 FURAN 등의 새로운 규제와 중금속, 혹은 분진들에 대해 강화되는 환경 규제치에 적응하기 어려워짐에 따라 BAG FILTER로의 전환/개선 방안이 많이 연구되고 있으며 이미 활용되어지는 부분도 있는바 이에 대한 새로운 적용방법등을 소개하고자 한다.

• 한국연소학회:학술대회논문집
• /
• 2012.04a
• /
• pp.151-152
• /
• 2012

Collectors connected to diesel engine exhaust pipe for application of PM reduction facilities which was used to reduce PM from the exhaust gas produced from ship, Filtration performance of PM was tested. In this system, it was confirmed that the bag house can remove over 90 percent of PM from a lot of high temperature and high pressure gases produced in diesel engine. The results obtained from performance test show the potential possibility for commercialization of ceramic filter collectors which is applied to reduction facilities of flue gas produced from a diesel engine on the ship.

• Journal of Korean Society for Atmospheric Environment
• /
• v.11 no.4
• /
• pp.373-375
• /
• 1995

In order to turn the Bag Filter to the Purse Filter, the past system that the adverse reason is removed, the input of synthetic materiality of dust and air is placed down, and the output is placed up has been improved so that any adverse effect shall not be raised. The form of filteration mechanism is changed from a cylinder from, and the dust and air is mixed to make the entry velocity and one person can velocity of the mixed materiality become lower by the use of infinity, and the reception of filteration mechanism has been made reasonably. The dust separated from the filteration mechanism is desceded down, snd the mixde materiality is ascended up. So, a cross point is formed, and a collision and a friction is occurred from its process, and at its result, dust is scattered to stick to a filter cloth, therefore, the loss of pressure shall ont be appeared by cause of the increase of dust-loading.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.2
• /
• pp.983-989
• /
• 2013

The current research reviewed the design conditions that would maximize the efficiency of the hybrid collector that combines in one unit "cyclone-inertial impaction-bag filter". The computational analysis for the shape of cyclone entry predicts that a design that installs the guide vane at the entry of the tangential type cyclone brings a high-rpm and powerful vortex, very effective in promoting the deflection of coarse particles from the streamline at the cyclone. As the lower part of the cyclone is venturi-shaped, however, a strong flow downward of 4 to 5 m/sec persists through the lower part of the hopper, revealing the likely reentrainment of collected dust. And the removal of the venturi at the lower part of the cyclone would solve the problem of the reentrainment of collected dust. The acceleration of the flow velocity through the adjustment of the gap of the collision baffle would increase the effect of collision, but as the interference with the dust separation is expected, the original design should be kept for the baffle.

• Clean Technology
• /
• v.6 no.2
• /
• pp.121-127
• /
• 2000

There are several kinds of hazardous materials in incinerator flue gas, such as particulate matter, acid gas, heavy metal, dioxin, etc. The activated carbon adsorption is considered as one of the methods removing dioxin from flue gas. Without any additional equipment and facilities, the activated carbon was mixed with lime and sprayed in the semi-drying reactor of an incinerator and filtered in the bag filter, and its efficiency of removing hazardous organic material was investigated. 1,2-dichlorobenzene (o-DCB) was used as a precursor material of dioxin and the effects of the activated carbon amount, the operating temperature of the reactor, and the atomizer r.p.m were measured and analyzed. Experimental results showed that the optimum outlet temperature of the reactor was $145^{\circ}C$ considering the performance of the bag filter, and the adsorption performance improved with the increase of the atomizer r.p.m. Also the performance of removing o-DCB in the bag filter is higher than of the semi-drying reactor.

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2001.11a
• /
• pp.95-96
• /
• 2001

인천항은 한국의 주항의 하나로 원자재 수입화물을 취급하는 항만이다. 수입된 원자재 중에서 대두박등의 사료 부원료의 취급 시 강한 바람, 차량의 이동, 저장시설에서의 상하차 등에 의하여 다량의 비산먼지가 발생하여 인천항의 주된 비산먼지 오염원이 되고 있는 실정이다 (Jeon et al., 2000). 일반적으로 사료 부원료의 취급에 의하여 발생하는 비산먼지의 제진을 위하여, 사료 부원료 취급시설에 bag filter에 의한 제진시설이 사용되고 있다. (중략)

• Proceedings of the Korea Air Pollution Research Association Conference
• /
• 2002.11a
• /
• pp.415-416
• /
• 2002

급속한 경제발전에 따라 생활 수준이 향상되고 생활양식도 많이 변화되고 있으며 가정이나 생산현장에서 발생하는 폐기물의 발생량은 급속히 증가하고 있다. 해마다 누적되어 가는 폐기물 매립량의 증가로 인하여 기존 폐기물 매립지는 현재 거의 포화 상태에 달해 있다. 이에 따라 우리나라의 폐기물 처리 방법은 기존의 매립위주에서 소각처리로 점차 확대되어 나가고 있는 실정이지만 소각시설 인근 지역의 환경 질 저하에 대한 문제점 및 주민민원 발생 또한 빈번해지고 있는 추세이다. (중략)