• 대한임베디드공학회논문지
• /
• 제12권2호
• /
• pp.97-103
• /
• 2017

Thermal imaging is mainly used in military equipment required for night observation. In particular, technologies of uncooled thermal imaging detectors are being developed as applied to low-cost night observation system. Many system integrators require different specifications of the uncooled thermal imaging camera but their development time is short. In this approach, EOSYSTEM has developed a small size, TEC-less uncooled thermal imaging camera module with $32{\times}32mm$ size and low power consumption. Both domestic detector and import detector are applied to the EOSYSTEM's thermal imaging camera module. The camera module contains efficient infrared image processing algorithms including : Temperature compensation non-uniformity correction, Bad/Dead pixel replacement, Column noise removal, Contrast/Edge enhancement algorithms providing stable and low residual non-uniformity infrared image.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.845-848
• /
• 2007

Analysis of point defects invisible by a microscope has been studied on the a-Si thin film transistor panel. The point defects which were named Invisible Point Defect (IPD) is characterized by no particles or distortion of patterns on a pixel structure and randomly distributed on panels. To investigate the IPD, measurements were carried out: gray level driving, transistor transfer characteristic, focused ion beam (FIB), and secondary ion mass spectrometry (SIMS). The results showed that a contamination layer had a bad influence on an active surface. The contamination layer consisted of oxygen and iron from a water supply line during cleaning process. After the process tuning, IPD has been stabilized.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제16권5호
• /
• pp.596-600
• /
• 2010

본 논문에서는 모바일 폰 터치스크린에서 허프 변환(hough transform) 방법을 이용한 반자동식 정점(vertex) 검출 알고리즘을 제안한다. 제안하는 방법은 사용자의 입력 위치를 기준으로 작은 범위의 ROI(region of interest) 영역 내에서 한정된 매개변수 범위를 탐색하는 허프 변환을 수행함으로써 빠른 처리속도를 보인다. 또한 허프 변환을 통해 검출된 후보직선 중에서 사용자 입력 위치와 가까운 두 직선을 선택함으로써 영상의 잡음으로 인해 잘 못 검출된 후보 직선을 제거할 수 있다. 그리고 검출된 두 직선의 교점을 정점으로 검출함으로써 초기 정점 선택을 위한 입력 이외의 추가적인 상호작용 과정 없이 정확한 정점을 검출할 수 있다. 결과적으로 본 논문에서는 실험을 통해서 제안하는 알고리즘이 센싱 정밀도가 낮은 터치스크린(평균 센싱 오류: 6.3픽셀)에서의 부정확한 입력(5.7 픽셀)에도 1.4픽셀 정도의 정확한 정점 검출 성능을 보이는 것을 확인할 수 있었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 ITC-CSCC -2
• /
• pp.885-888
• /
• 2000

Among the previous searching methods, there are the typical methods such as full search and three-step search, etc. Block motion estimation using exhaustive search is too computationally intensive. To apply in practice, recently proposed fast algorithms have been focused on reducing the computational complexity by limiting the number of searching points. According to the reduction of searching points, the quality performance is aggravated in those algorithms. In this paper, We present a fast and efficient search algorithm for block motion estimation that produces better quality performance and less computational time compared with a three-step search (TSS). Previously the proposed Two Step Search Algorithm (TWSS) by Fang-Hsuan Cheng and San-Nan sun is based on the ideas of dithering pattern for pixel decimation using a part of a block pixels for BMA (Block Matching Algorithm) and multi-candidate to compensate quality performance with several locations. This method has good quality performance at slow moving images, but has bad quality performance at fast moving images. To resolve this problem, the proposed algorithm in this paper considers spatial and temporal correlation using neighbor and previous blocks to improve quality performance. This performance uses neighbor motion vectors and previous motion vectors in addition, thus it needs more searching points. To compensate this weakness, the proposed algorithm uses statistical character of dithering matrix. The proposed algorithm is superior to TWSS in quality performance and has similar computational complexity

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2002년도 Proceedings of International Symposium on Remote Sensing
• /
• pp.721-727
• /
• 2002

Precipitation evapotranspiration and runoff are three key parameters of regional water balance. Problems exist in the traditional methods for calculating such factors , such as explaining of the geographic rationality of spatial interpolating methods and lacking of enough observation stations in many important area for bad natural conditions. With the development of modern spatial info-techniques, new efficient shifts arose for traditional studies. Guided by theories on energy flow and materials exchange within Soil-Atmosphere-Plant Continuant (SPAC), retrieval models of key hydrological parameters were established in the Yellow River basin using CMS-5 and FengYun-2 meteorological satellite data. Precipitation and evapotranspiration were then estimated: (1) Estimating tile amount of solar energy that is absorbed by the ground with surface reflectivity, which is measured in the visible wavelength band (VIS): (2) Assessing the partitioning of the absorbed energy between sensible and latent heat with the surface temperature, which was measured in the thermal infrared band (TIR), the latent heat representing the evapotranspiration of water; (3) Clouds are identified and cloud top levels are classified using both VIS and TIR data. Hereafter precipitation will be calculated pixel by pixel with retrieval model. Daily results are first obtained, which are then processed to decade, monthly and yearly products. Precipitation model has been has been and tested with ground truth data; meanwhile, the evapotranspiration result has been verified with Large Aperture Scintillometry (LAS) presented by Wageningen University of the Netherlands. Further studies may concentrate on the application of models, i.e., establish a hydrological model of the Yellow river basin to make the accurate estimation of river volume and even monitor the whole hydrological progress.

• ETRI Journal
• /
• 제35권6호
• /
• pp.1011-1020
• /
• 2013

In this paper, we present a method for obtaining a high-quality 3D depth. The advantages of active pattern projection and passive stereo matching are combined and a system is established. A diffractive optical element (DOE) is developed to project the active pattern. Cross guidance (CG) and auto guidance (AG) are proposed to perform the passive stereo matching in a stereo image in which a DOE pattern is projected. When obtaining the image, the CG emits a DOE pattern periodically and consecutively receives the original and pattern images. In addition, stereo matching is performed using these images. The AG projects the DOE pattern continuously. It conducts cost aggregation, and the image is restored through the process of removing the pattern from the pattern image. The ground truth is generated to estimate the optimal parameter among various stereo matching algorithms. Using the ground truth, the optimal parameter is estimated and the cost computation and aggregation algorithm are selected. The depth is calculated and bad-pixel errors make up 4.45% of the non-occlusion area.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2015년도 춘계학술대회
• /
• pp.376-380
• /
• 2015

본 논문은 안개 낀 날 차선을 인식하는 방법을 제안한다. 이것은 주행 중 안개구간이 나타나면 시야확보가 어려운 운전자의 안전을 도모하고 또한 자동차 자율 주행을 가능하게 하기 위한 것이다. 제안한 방법은 먼저 입력 영상에서 화소 수 분포와 시작점으로 안개 구간인지를 판단한다. 만약 안개구간이면 Retinex 알고리즘에서 미디언 필터를 입력영상의 범위만큼 한 후 히스토그램 평활화와 정규화를 수행한다. 실험 결과 기존 연구보다 차선 검출이 정확하고 먼 거리까지 인식할 수 있었다.

• 천문학회보
• /
• 제43권1호
• /
• pp.40.2-40.2
• /
• 2018

외계행성 탐색시스템으로 관측한 영상은 한국천문연구원 본원에 있는 자료처리 시스템으로 실시간 전송된다. 이를 위해 한국과학기술정보연구원이 운영 중인 첨단망과 UDP 전송 프로그램을 활용하고 있으며 연간 약 140TB의 관측 영상을 칠레 55Mbps, 남아공 39Mbps, 호주 410Mbps의 속도로 전송하고 있다. 관측 영상이 전송되면 MEF 포맷으로 구조화 하고 bias, flat, crosstalk 보정과 bad pixel masking 등의 전처리 과정을 거쳐 각 연구과제별로 실시간 배포하고 있다. 중력렌즈 연구를 위한 우리 은하 중심부 관측영상은 차감영상 기법을 사용하여 약 3억 개의 별에 대해 측광하고 있으며, $18K{\times}18K$ 크기의 대용량 관측 영상을 빠르고 효율적으로 처리하기 위해 256개로 분할하여 분산처리하고 있다. 2014년부터 자료처리를 위한 시스템을 구축하고 증설하였으며 현재 11대의 서버(212Core)와 2.7PB의 NAS 스토리지를 운영하며 연간 700TB이상의 자료를 처리하고 있다. 우리은하 중심부 측광자료에서 검출된 변광 현상을 정리하여 측광데이터베이스를 구축하였다. 본 발표에서는 KMTNet 실시간 자료처리 과정에 대한 상세한 내용과 향후 자료처리 시스템 개선방향에 대해 소개한다.

• 대한의용생체공학회:의공학회지
• /
• 제30권6호
• /
• pp.476-481
• /
• 2009

The most troublesome artifacts in micro computed tomography (micro-CT) are ring artifacts. The ring artifacts are caused by non-uniform sensitivity and defective pixels of the x-ray detector. These ring artifacts seriously degrade the quality of CT images. In flat-panel detector based micro-CT systems, the ring artifacts are hardly removed by conventional correction methods of digital radiography, because very small difference of detector pixel signals may make severe ring artifacts. This paper presents a novel method to remove ring artifacts in flat-panel detector based micro-CT systems. First, the bad lines of a sinogram which are caused by defective pixels of the detector are identified, and then, they are corrected using a cubic spline interpolation technique. Finally, a ring artifacts free image is reconstructed from the corrected projections. We applied the method to various kinds of objects and found that the image qualities were much improved.

• 한국전기전자재료학회논문지
• /
• 제17권11호
• /
• pp.1234-1240
• /
• 2004

We studied on the electro-optic characteristics and dynamic stability according to an undesirably defined pretilt angle induced in high step coverage of pixel area for the Twisted Nematic (TN) / Fringe-Field Switching (FFS) mode. In case of the TN mode, LC directors twist reversely near the edges of thin-film-transistor and black matrix where the pretilt angle of the LC is not well defined. Therefore, the voltage-dependent dynamics of the LC in TN mode is unstable and shows the bad electro-optic characteristics. On the other hand, in case of the FFS mode, the LCs are twisted parallel to the bottom substrate by fringe electric field and the electro-optic characteristic is not influenced by the pretilt angle of the LC which is not well defined.