• 대한기계학회논문집B
• /
• 제25권1호
• /
• pp.87-95
• /
• 2001

A numerical study was made of heat transfer in locally-forced turbulent separated and reattaching flow over a backward-facing step. The local forcing was given to the flow by means of sinusoidally oscillating jet from a separation line. A Rhee and Sung version of the unsteady $\kappa$-$\varepsilon$-f(sub)u model and the diffusivity tensor heat transfer model were employed. The Reynolds number was fixed at Re(sub)H=33,000 and the forcing frequency was varied in the range 0$\leq$fH/U(sub)$\infty$$\leq$2. The condition of constant heat flux was imposed at the bottom wall. The predicted results were compared and validated with the experimental data of Chun and Sung and Vogel and Eaton. The enhancement of heat transfer in turbulent separated and reattaching flow by local forcing was evaluated and analyzed.

• Journal of Advanced Marine Engineering and Technology
• /
• 제36권6호
• /
• pp.844-849
• /
• 2012

양방향 컨버터는 신재생에너지를 이용하는 전력시스템, 무정전 전원 공급장치, 전기차 등 여러분야에서 사용되며, 양방향 절연 컨버터는 양방향 비절연 컨버터보다 높은 신뢰성을 갖지만 효율이 낮다는 단점이 있다. 본 논문에서는 개선된 효율을 가지는 절연된 양방향 Zeta-Flyback 컨버터를 제안한다. 이 컨버터는 양방향 Flyback 컨버터와 양방향 Zeta 컨버터의 중첩으로서 순방향 동작과 역방향 동작에서 전력 흐름이 변압기와 소자를 통해 수행되어 변압기 이용률이 증가하고, 출력 전압은 스위치의 일정 주파수 PWM의 듀티비에 의해 제어된다. 제안된 양방향 Zeta-Flyback 컨버터와 양방향 Flyback 컨버터를 비교하면 제안된 양방향 Zeta-Flyback 컨버터가 더 높은 효율을 갖으며 이를 시뮬레이션과 실험을 통하여 확인하였다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2006년도 추계 학술대회논문집
• /
• pp.193-198
• /
• 2006

It takes a lot of time and effort to generate grids for numerical analysis of problems with ground effect because the relative attitude and height of airfoil should be maintained to the ground as well as the inflow. A low Mach number preconditioned turbulent flow solver using the overlap grid technique has been developed and applied to the ground effect simulation. It has been validated that the present method using the multi-block grid gives us highly accurate solutions comparing with the experimental data of the RAE 101 airfoil in an unbounded condition. Present numerical method has been extended to simulate ground effect problems by using the overlapped grid system to avoid tedious work in generating multi-block grid system. An extended method using the overlapped grid has been verified and validated by comparing with results of multi-block method and experimental data as well. Consequently, the overlapped grid method can provide not only sufficiently accurate solutions but also the efficiency to simulate ground effect problems. It is shown that the pressure and aerodynamic centers move backward by the ground effect as the airfoil approaches to the ground.

• 대한기계학회논문집A
• /
• 제33권1호
• /
• pp.27-33
• /
• 2009

Human postural responses appeared to have stereotyped modality, such as ankle mode, knee mode and hip mode in response to various perturbations. We examined whether human postural control gain of full-state feedback could be decoupled along with the eigenvector. To verify the model, postural responses subjected to fast backward perturbation were used. Upright posture was modeled as 3-segment inverted pendulum incorporated with feedback control, and joint torques were calculated using inverse dynamics. Postural modalities such as ankle, knee and hip mode were obtained from eigenvectors of biomechanical model. As oppose to the full-state feedback control, independent eigenvector control assumes that modal control input is determined by the linear combination of corresponding modality. We used optimization method to obtain and compare the feedback gains for both independent eigenvector control and full-state feedback control. As a result, we found that simulation result of eigenvector feedback was not competitive in comparison with that of full-state feedback control. This implies that the CNS would make use of full-state body information to generate compensative joint torques.

• 한국화재소방학회논문지
• /
• 제25권5호
• /
• pp.32-38
• /
• 2011

호버크래프트는 수륙양용으로 운용이 가능하고, 일반 보트에 비해 연비가 좋은 관계로 보트의 대체 수단 및 레저용으로 이용이 증가하는 추세이다. 아울러 우리나라도 소방서의 인명구조구급용으로의 수요가 점차 많아지고 있다. 본 논문에서는 호버크래프트의 전진과 후진을 자유롭게 하기 위해 후진 시 방향을 제어할 수 있는 후진 버켓 컴퓨터 시스템 제어기를 개발하였다. 제안한 시스템제어기의 타당성을 입증하기 위하여 Matlab으로 시뮬레이션 한 다음, 실제 소방서에 납품하는 기종에 장착하여 실증 실험을 수행하 였다. 그 결과 호버크래프트는 추진 공기의 흐름에 대하여 좌 우 및 역 추진이 용이하였으며 인명 구조시나 고속 주행시 등에서도 안정된 운용이 가능함을 확인 하였다.

• 전기전자학회논문지
• /
• 제11권4호
• /
• pp.219-226
• /
• 2007

본 논문은 HDR(High Dynamic Range) 영상을 기존의 JPEG 압축 방법을 이용하여 효율적으로 압축할 수 있는 방안을 제안한다. 입력 HDR 영상을 동적 영역 압축(Dynamic range compression)하여 통해 얻어지는 LDR(Low Dynamic Rage) 영상 및 HDR 영상과 LDR영상의 비율을 나타내는 비율 (Ratio) 영상으로 분리한다. LDR 영상은 하위 호환성을 유지하기 위해 기존의 JPEG 알고리듬을 이용하여 압축하며, 비율 영상은 각 블록별로 HVS(Human Visual System)이 인지하는 차이를 모델링 한 비용함수를 최소화 하도록 압축한다. 따라서 제안하는 알고리듬을 적용하면 동일한 조건에서 압축된 결과 영상에 왜곡이 적게 발생하게 되며, 컴퓨터 모의실험을 통해 그 유효성을 확인한다.

• 대한기계학회논문집B
• /
• 제24권8호
• /
• pp.1104-1111
• /
• 2000

Erosion-corrosion in a pipe system often occurs at fittings, valves, and weld beads where flow separation and reattachment yield high turbulence intensity. Thus identifying their correlations would be the first step towards resolving the erosion-corrosion problems associated with industrial applications. Bremhorst of the Univ. of Queensland, Australia, proposed that a rotating cylinder with surface roughness (two backward-facing steps periodically mounted on a circular cylinder) be an economical and tractable tool which can generate extreme flow conditions for erosion-corrosion study. In this work, DNS has been carried out for turbulent flows around the same rotating cylinder as his experimental apparatus. Our result shows that a region of intense turbulence intensity and high wall-shear stress fluctuation is formed along the cylinder surface in the recirculating region behind the step, where high mass-transfer capacity is also experimentally observed. Since corrosion is mass-transfer controlled, our finding sheds light on the direction of future corrosion research.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계학술대회 논문집 유기절연재료 전자세라믹 방전플라즈마 일렉트렛트 및 응용기술
• /
• pp.185-188
• /
• 2002

This paper describes the information for quantitative simulation of weakly ionized plasma. We should grasp the meaning of the plasma state condition to utilize engineering application and to understand materials of plasma state. In this paper, the drift velocity of electron in $SF_6+O_2$ mixture gas calculated for range E/N values l~900[Td] at the temperature is 300[$^{\circ}K$] and pressure is 1[Torr], using a set of electron collision cross sections determined by the authors and the values of drift velocity of electrons are obtained for TOF, PT, SST sampling method of Backward Prolongation by two term approximation Boltzmann equation method. It has also been used to predict swarm parameter using the values of cross section as input. The result of Boltzmann equation, the drift velocity of electrons, has been compared with pure $SF_6$, pure $O_2$ and mixture gas.

• 한국정보처리학회논문지
• /
• 제7권4호
• /
• pp.1236-1245
• /
• 2000

This paper propose a novel scheme, called Mobiel Terminal Initiated Scheme(MTIS), in which mobile terminal initiates the backward handover by sending handover request message with the list of target radio ports. In this scheme, the old ATM switch suporting end-user mobility, denoted by EMAS\ulcorner, checks whether each EMAS\ulcorner, managing the target radio port, has its available resources. If it has, the EMAS\ulcorner performs the path rerouting between CrossOver Switch (COS) and itself after deciding the most suitable target radio port. Therefore, the MT initiates the handover after deciding the most suitable target radio port through the beacon signal of Wireless Access Point (WAP). The EMAS\ulcorner have only to check the resource availability of the target radio port. It is no need to waste time to decide the suitable target radio port. Also, once receiving the request of the resource availability, the EMAS\ulcorner can reduce the rerouting delay time due to perform the path rerouting to the COS. In comparison with that of the ATM-Forum procedure, our proposed MTIS handover delay time reduced 14~21%, and end-to-end transfer delay time reduced 2~9%, as a result of the simulation.

• 소성∙가공
• /
• 제11권5호
• /
• pp.405-413
• /
• 2002

A process planning system for cold forging of non-axisymmetric parts of comparatively simple shape was developed in this study. Programs for the system have been written with Visual LISP in AutoCAD. Shape of the product must be drawn with the solid line and the hidden line, and with the plane and front view, as well. At the plane, the system recognizes the external shape of non-axisymmetric portions - the number of the sides of the regular polygons and the radii of circles inscribing and circumscribing the polygon. At the front view, the system cognizes the diameter of axisymmetric portions and the height of the primitive geometries such as polygon, cylinder, cone, concave, convex, etc. The system perceives that the list developed from the solid line must be formed by the operation of forward extrusion or upsetting, and that the list developed from the hidden line must be formed by the operation of backward extrusion. The system designs the intermediate geometries again by considering clearance between workpiece and die, and then finally the billet diameter, in reverse order from the finished product, on the basis of volume constancy and using the operations, the forming sequence, the number of operations and the intermediate geometries which were already designed. The design rules and knowledges for the system were extracted from the plasticity theories, handbook, relevant reference and empirical knowledge of field experts. Suitability of the process planning was analyzed using SuperForge of FVM simulation package. The results of analysis showed good formability.