• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 추계학술대회 논문집
• /
• pp.499-504
• /
• 1993

To find a way for establishing work roll initial crown according to roll conditions, computer simulation for predicting plate crown in plate mill is done and effects of roll conditions on plate crown is analysed. Roll gap profile and plate crown are measured to be compared to the calculated values. As a result,a regression equation to establish work roll initial crown according to roll cooditions such as backup roll diameter, backup roll crown and work roll crown is obtained.

• 한국산학기술학회논문지
• /
• 제6권6호
• /
• pp.486-490
• /
• 2005

웹이 광범위하게 사용됨에 따라 정보를 획득하기 위해 대다수의 사용자들이 웹에 의존하고 있으며, 이로 인해 웹을 통한 데이터 관리의 필요성이 증가하고 있다. 네트워크로 연결되어 있는 환경에서는 갑작스런 시스템 장애가 자주 발생하며, 이런 위험으로부터 데이터를 안전하게 관리${\cdot}$보호하는 것이 중요한 업무 중 하나이다. 본 논문에서 제안하는 방식은 서버에 직접 연결되지 않더라도 웹브라우저를 통해 저장되어있는 데이터에 대한 백업과 복구가 가능한 환경을 지원한다. 백업과 복구 모두 두 가지 방식을 사용함으로써 시간과 관리측면을 고려하여 선택할 수 있다.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2009년도 정보통신설비 학술대회
• /
• pp.285-288
• /
• 2009

The emergency recovery scheme in time of a disaster or accident up to now has been focused on how to build a backup for the public service or communication network in national scale, also, all the mobile operators have done as recovery scheme for the equipment failure in their network was to make a backup copy of billing data or package data, and they have usually studied only on the backup and failure recovery scheme in the circuit-switched network. However, since it has become more probable recently that a disaster or accident could occur in the switching office buildings, a recovery scheme in time of the failure of these entire switching offices became necessary. The purpose of this paper is to propose various recovery schemes, and by having checkups on many issues that could arise while carrying out these schemes, it presents the best solution for each issue. Moreover, it presents the future tasks that need to be studied as well as initial study directions.

• International Journal of Internet, Broadcasting and Communication
• /
• 제12권2호
• /
• pp.144-149
• /
• 2020

A database called Home Location Register(HLR) plays a major role in location management in mobile cellular networks. The objectives of this paper are to identify the problems of the current HLR system through rigorous analysis, to suggest solutions to them. The current HLR backup method is a process of simply writing the changed memory SLD block to disk, which has a problem in maintaining database consistency. Since information change and backup are performed separately by separate processes, there is a risk of information inconsistency when an error restart occurs. To solve this problem, a transaction concept was introduced for subscriber-related operation functions and a recovery method through logging and checkpointing was introduced. The subscriber related functions of tasks terminated normally by the suggested process are recovered with consistency even after system restarts. Performance is also not affected seriously because disk tasks for log occur with only subscriber related functions.

• Journal of information and communication convergence engineering
• /
• 제18권3호
• /
• pp.201-206
• /
• 2020

This paper presents a new method for controlling the current of lighting LEDs without current sensors. This method can be used as backup against LED current sensor faults. LED lighting requires a circuit with a constant current in order to maintain the same brightness when the ambient temperature changes. Therefore, we propose a new current estimation method to provide backup in case of current sensor faults based on the calculation of the inductor current. In the fabricated circuit, the average current changes from 144.03 mA to 155.97 mA when the ambient temperature changes from 0℃ to 60℃. The application of this study can enable the fabrication of a driving IC for LEDs in the form of a single chip without sensing resistors. This is expected to reduce the complexity of the peripheral circuit and enable precise feedback control.

• 대한임베디드공학회논문지
• /
• 제12권3호
• /
• pp.177-184
• /
• 2017

High performance non-volatile memory system can mitigate the gap between main memory and storage. However, no single memory devices fulfill the requirements. Non-volatile Dual In-line Memory Module (NVDIMM) consisted of DRAMs and NAND Flashes has been proposed to achieve the performance and non-volatility simultaneously. When power outage occurs, data in DRAM is backed up into NAND Flash using a small-size external energy storage such as a supercapacitor. Backup and restore operations of NVDIMM do not cooperate with the operating system in the NVDIMM standard, thus there is room to optimize its operation. This paper analysis the operation of NVDIMM and proposes a method to reduce backup and restore time. Particularly, data compression is introduced to reduce the amount of data that to be backed up and restored. The simulation results show that the proposed method reduces up to 72.6% of backup and restore time.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.307-308
• /
• 2008

This paper presents the effects of operating Backup Dispatch Center as a System Dispatch Center(SDC). SDC operates the 154kV transmission lines outside of Seoul metropolitan area, and acts as the backup dispatch center in case of central dispatch center's failure. With SDC, it became possible not only to divide operation of Korean transmission lines to separate control centers according to voltage and region, but to clear faults faster and more accurately. It has paved the way to improve power system reliability and advance the power system operation in general.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 제7회 압연 심포지엄
• /
• pp.62-64
• /
• 2009

Control of back-up roll deformation and wear profile in plate rolling is important not only for enhancement of the structural precision of mill, but also for improving the yield and rolling operation. in the heavy plate mill, there have been strong demands for upgrading back up roll operation technology. In order to satisfy these demands, it is essential to develop the backup roll deformation analysis models and wear profile prediction models. This paper gives a general description of the backup roll deformation and wear model, simulation result for deformation analysis and wear profile.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2009년도 춘계학술발표회 논문집
• /
• pp.135-143
• /
• 2009

The purpose of this research is to reduce editors' workload and automation to update(v) Digital Map(n) regarding changed topography. In Digital Map case, it usually uses the way of various survey to update(v). In this case, it costs a great deal and doesn't be efficient backup management. Accordingly, it can reduce editors' the period of the process and be efficiently managed the backup data due to well organized backup data management. We present update plan that used clipping and join for this result by analyzing Boundary of input data.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2012년도 제38회 춘계학술대회논문집
• /
• pp.468-471
• /
• 2012

본 논문은 우주발사체에 사용되는 추진기관의 성능평가를 수행하기 위한 지상연소시험설비의 이중화 또는 삼중화 제어시스템의 구축 방안을 다루고 있다. 이중화된 제어시스템의 경우 수동제어 콘솔을 설치하여 삼중화 제어시스템을 모사할 수 있었고, 운용자들의 무분별한 조작을 통제하기 위한 제어실 내 제어 콘솔의 배치 안을 제시하였다.