• 제목/요약/키워드: Backscattering

검색결과 437건 처리시간 0.03초

Substrate tempperature dependence of crystalline Y2O3 films grown by Ionized Cluster Beam Deposition

  • Cho, M.H.;Whangbo, S.W.;Seo, J.G.;Choi, S.C.;Cho, S.J.;Whang, C.N.
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 1998년도 제14회 학술발표회 논문개요집
    • /
    • pp.87-89
    • /
    • 1998
  • The Y2O3 films on Si(111) was grown by ionized cluster beam depposition (ICBD) in ultrahigh-vacuum (UHV). The acceleration voltage and oxygen ppartial ppressure were fixed at 5 kV and 2$\times$10-5 Torr resppectively. The substrate tempperature was varied from 10$0^{\circ}C$ to $600^{\circ}C$ in order to find the deppendence of crystallinity of Y2O3 films on the substrate tempperature. The crystallinity of the films with the substrate tempperature studied using x-ray diffraction (XRD) and Rutherford backscattering sppectroscoppy (RES). Surface crystallinity and surface morpphology of the films were also investigated using the reflection high-energy electron diffraction (RHEED) and atomic force microscoppe (AFM) resppectively. The films grown at the substrate tempperature below 50$0^{\circ}C$showed the ppoly-crystalline structure of oxygen deficiency. On the contrary the single-crystalline structure was obtained at the substrate tempperature over 50$0^{\circ}C$ and the stochimetry was gradually matched as increasing the substrate tempperature. The surface morpphology showed the increase of the surface roughness as the substrate tempperature was increased upp to 50$0^{\circ}C$ The crystallinity of the film was not good and the minimum channeling yield $\chi$min was measured at 0.91 The stochiometric and high crystallinine film (surface $\chi$min=0.25) was obtained as the substrate tempperature increased upp to 60 $0^{\circ}C$ which indicate the tempperature was sufficient to migrate the depposited atom.

  • PDF

어군 탐지기를 이용한 남해연안의 어자원 분포현황과 해양환경구조 (Distribution of Fish by Echo Sounder and Environment of Oceanography in Southern Sea of Korea)

  • 황두진;신형호;김동수
    • 수산해양기술연구
    • /
    • 제35권2호
    • /
    • pp.170-177
    • /
    • 1999
  • 1998년 7월27일부터 7월31일까지 남해안 연안어장을 대상으로 칼라어군탐지기를 이용한 어군 분포의 파악과 동시에 해양환경 계측장비를 이용한 환경요소와의 관계를 고찰한 결과는 다음과 같다. 동 기간에 칼라어군탐지기의 28㎑의 경우에 가막만외해와 제주도 동북쪽 해역에서,200㎑의 경우에는 제주도 북동쪽, 금오도 남쪽, 남해도 남쪽, 가막만 외해에서 고밀도 어군이 발견되었으며, 28㎑ 보다 200㎑에서 상대적 Sa값이 높게 나타났다. 동 시기의 제주도 북동쪽해역의 해양환경은 표층의 고온(20∼26.5$^{\circ}C$), 저염분수(31.5∼32.5$\textperthousand$)와 저층의 저온(16∼20$^{\circ}C$), 고염분수(33.5∼34$\textperthousand$)가 교차하는 전선대가 형성되어 있었으며, 갈치 어장이 형성되어 있었다. 또, 고온(24∼26.5$^{\circ}C$), 저염분(30.0∼31.5$\textperthousand$)이 균일하게 분포하고 있는 수심이 얕은 가막만 외해에서는 멸치어장이 형성되어 있었다.

  • PDF

Decision of Interface and Depth Scale Calibration of Multilayer Films by SIMS Depth Profiling

  • Hwang, Hye-Hyun;Jang, Jong-Shik;Kang, Hee-Jae;Kim, Kyung-Joong
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
    • /
    • pp.274-274
    • /
    • 2012
  • In-depth analysis by secondary ion mass spectrometry (SIMS) is very important for the development of electronic devices using multilayered structures, because the quantity and depth distribution of some elements are critical for the electronic properties. Correct determination of the interface locations is critical for the calibration of the depth scale in SIMS depth profiling analysis of multilayer films. However, the interface locations are distorted from real ones by the several effects due to sputtering with energetic ions. In this study, the determination of interface locations in SIMS depth profiling of multilayer films was investigated by Si/Ge and Ti/Si multilayer systems. The original SIMS depth profiles were converted into compositional depth profiles by the relative sensitivity factors (RSF) derived from the atomic compositions of Si-Ge and Si-Ti alloy reference films determined by Rutherford backscattering spectroscopy. The thicknesses of the Si/Ge and Ti/Si multilayer films measured by SIMS depth profiling with various impact energy ion beam were compared with those measured by TEM. There are two methods to determine the interface locations. The one is the feasibility of 50 atomic % definition in SIMS composition depth profiling. And another one is using a distribution of SiGe and SiTi dimer ions. This study showed that the layer thicknesses measured with low energy oxygen and Cs ion beam and, by extension, with method of 50 atomic % definition were well correlated with the real thicknesses determined by TEM.

  • PDF

라만분광을 이용한 오이 종자의 발아예측 (Germination Prediction of Cucumber (cucumis sativus) Seed using Raman Spectroscopy)

  • 모창연;강석원;이강진;김기영;조병관;임종국;이호선;박종률
    • Journal of Biosystems Engineering
    • /
    • 제37권6호
    • /
    • pp.404-410
    • /
    • 2012
  • Purpose: The objective of this research was to select high quality cucumber (cucumis sativus) seed by classifying into viable or non-viable one using Raman spectroscopy. Method: Both transmission and back-scattering Raman spectra of viable and non-viable seeds in the range from $150cm^{-1}$ to $1890cm^{-1}$ were collected with a laser illumination. Results: The Raman spectra of cucumber seed showed Raman peaks with features of polyunsaturated fatty acids. The partial least squares-discriminant analysis (PLS-DA) to predict viable seeds was developed with measured transmission and backscattering spectra with Raman spectroscopy and germination test results. Various types of spectra pretreatment were investigated to develop the classification models. The results of developed PLS-DA models using the transmission spectra with mean normalization or range normalization, and back-scattering spectra with mean normalization treatment or baseline correction showed 100% discrimination accuracy. Conclusions: These results showed that Raman spectroscopy technologies can be used to select the high quality cucumber seeds.

보정된 Scatterometer의 측정데이터를 사용한 SAR 데이터 교정 (SAR Data Correction Based on Calibrated-Scatterometer Measurements)

  • 정구준;홍진영;오이석
    • 한국전자파학회논문지
    • /
    • 제15권2호
    • /
    • pp.121-126
    • /
    • 2004
  • 본 논문에서는 calibration된 scatterometer를 이용하여 SAR 데이터를 보정하는 연구 결과를 선보인다. 도체구를 이용하여 안테나 주빔에서의 polarimetric한 안테나 패턴(크기와 위상)을 측정하고, 이 데이터를 이용하여 차량 탑재형 네트워크 분석기형 scatterometer 시스템을 polarimetric하게 정확하게 보정하였다. 이 scatterometer를 이용하면 잔디밭, 논, 맨땅 등의 지표면에 대한 정확한 Mueller 행렬을 얻을 수 있으므로, 레이더 산란계수뿐만 아니라 위상변수들도 정확하게 측정하게 된다. 또한, 대부분의 SAR 시스템에는 위상변수 측정에 에러가 있게되고, polarimetric하게 보정된 scatterometer로 SAR가 측정하는 지역을 동시에 측정하여 SAR 데이터를 교정할 수 있다. 이러한 polarimetric한 보정 방법을 이용하면, 산란계수의 보정효과는 크지 않으나, hh-편파와 vv-편파간의 위상변수인 degree of correlation $\alpha$의 보정효과는 매우 큼을 알 수 있었다.

UHF 대역 RFID 리더 반송파 누설 억압 연구 (A Novel Carrier Leakage Suppression Scheme for UHF RFID Reader)

  • 정재영;박찬원;염경환
    • 한국전자파학회논문지
    • /
    • 제22권4호
    • /
    • pp.489-499
    • /
    • 2011
  • RFID 기술은 각 사물에 전자 태그를 부착하고, 사물의 고유 ID를 무선으로 인식하여 해당 정보를 수집, 저장, 가공, 추적하는 기술로 다양한 분야에 적용되고 있다. 본 논문에서는 UHF 대역 RFID 리더 수신기에서 반송파 누설 신호를 억압하기 위한 새로운 방법을 제안하였다. 제안한 반송파 누설 전력 억압용-RF 전단부 구조를 갖는 리더는 리미터를 포함하는 비선형 경로를 통해 송신 반송파 누설 복제 신호를 생성한다. 리미팅 기능은 반송파 누설 신호의 주파수와 위상 정보는 유지하면서 태그의 진폭 변조 성분을 제거한다. 위상 천이기를 포함하는 선형 구간에 송신 반송파 누설 복제 신호를 주입함으로써 태그의 역산란 신호 손실 없이 리더 반송파 누설 신호를 효과적으로 억압할 수 있다. 제작된 반송파 누설 전력 억압 회로는 910 MHz 중심 주파수에서 반송파 누설 신호 대비 태그 신호 비가 36 dB 억압 효과를 달성하였음을 측정 결과를 통해 확인하였으며, 이는 시뮬레이션 결과와 일치한다.

전자파 수치 해석을 위해 갤러킨 기법과 보간법을 혼용하여 개선시킨 모멘트법 (Improved Method of Moments Using Hybrid Technique of Galerkin's and Interpolation Methods for Numerical Analysis of Electromagnetic Waves)

  • 황지환;권순구;오이석
    • 한국전자파학회논문지
    • /
    • 제23권4호
    • /
    • pp.541-550
    • /
    • 2012
  • 본 논문에서는 3차원 공간의 전자파 수치 해석을 위한 모멘트법(method of moments)의 개선된 해석 기법을 선보인다. 전자파 산란 특성을 해석하기 위해 기본적으로 EFIE(Electric Field Integral Equation)와 RWG(Rao-Wilton-Glisson) 기저 함수를 이용하였으며, 계산 효율을 높이기 위해 기존의 갤러킨(Galerkin) 기법과 중심점 보간(interpolation)법을 혼용하여 해석 시간을 단축시켰다. 이때, 계산 정확도 유지를 위해 임피던스 행렬의 각 원소간 거리를 상대 거리 지수로 정의하여 보간법 적용이 가능한 먼 거리 원소를 구분하였다. 제안된 해석 기법의 성능 검증은 금속구의 Mie-series 해법을 이용한 이론적 RCS(Radar Cross Section)를 비교/분석하였다. 또한, 본 연구 결과를 삼면-/전방향- 전파반사기와 같은 산란체에 적용하여 레이더 후방 산란 특성을 분석하였다.

Development of High Spectral Resolution Lidar System for Measuring Aerosol and Cloud

  • Zhao, Ming;Xie, Chen-Bo;Zhong, Zhi-Qing;Wang, Bang-Xin;Wang, Zhen-Zhu;Dai, Pang-Da;Shang, Zhen;Tan, Min;Liu, Dong;Wang, Ying-Jian
    • Journal of the Optical Society of Korea
    • /
    • 제19권6호
    • /
    • pp.695-699
    • /
    • 2015
  • A high spectral resolution lidar (HSRL) system based on injection-seeded Nd:YAG laser and iodine absorption filter has been developed for the quantitative measurement of aerosol and cloud. The laser frequency is stabilized at 80 MHz by a frequency locking system and the absorption line of iodine cell is selected at the 1111 line with 2 GHz width. The observations show that the HSRL can provide vertical profiles of particle extinction coefficient, backscattering coefficient and lidar ratio for cloud and aerosol up to 12 km altitude, simultaneously. For the measured cases, the lidar ratios are 10~20 sr for cloud, 28~37 sr for dust, and 58~70 sr for urban pollution aerosol. It reveals the potential of HSRL to distinguish the type of aerosol and cloud. Time series measurements are given and demonstrate that the HSRL has ability to continuously observe the aerosol and cloud for day and night.

Roles of Fucoidan, an Anionic Sulfated Polysaccharide on BSA-Stabilized Oil-in-Water Emulsion

  • Kim, Do-Yeong;Shin, Weon-Sun
    • Macromolecular Research
    • /
    • 제17권2호
    • /
    • pp.128-132
    • /
    • 2009
  • Fucoidan, a sulfated polysaccharide derived from brown seaweed, is an important material valued for its various biological functions, including anti-coagulation, anti-aging, and immune system support. In this study, we examined the potential of fucoidan as a novel emulsifying agent in BSA (bovine serum albumin)-stabilized emulsion at a neutral pH. We measured the dispersed oil-droplet size, surface zeta-potential and creaming formation of 0.5 wt% BSA emulsion (20 wt% oil traction) in the absence and presence of fucoidan. The average particle size and zeta-potential value were 625.4 nm and -30.91 mV in only BSA-stabilized emulsion and 745.2 nm and -44.2 mV in 1.0 wt% fucoidan-added BSA emulsion, respectively. This result suggested that some positive charges of the BSA molecules interacted with the negative charges of fucoidan to inhibit the flocculation among the oil droplets. The creaming rate calculated from the backscattering data measured by Turbiscan dramatically decreased in 1.0 wt% fucoidan-added BSA emulsion during storage. Accordingly, the repulsion forces induced among the oil particles coated with 1.0 wt% fucoidan in emulsion solution resulted in significantly increased emulsion stability. The turbidity of the BSA-stabilized emulsion at 500 nm decreased during five days of storage. However, the fucoidan-added BSA emulsion exhibited a higher value of turbidity than the BSA-stabilized emulsion did. In conclusion, an anionic sulfated fucoidan lowered the surface zeta-potential of BSA-coated oil droplets via the electrostatic interaction, and subsequently inhibited the flocculation among the oil droplets, thereby clearly minimizing the creaming and phase separation of the emulsion.

기가 비트급 소자 제작을 위한 3차원 몬테카를로 극 저 에너지 이온 주입 모델링 (Modeling of 3D Monte Carlo Ion Implantation in the Ultra-Low Energy for the Fabrication of Giga-Bit Devices)

  • 반용찬;권오섭;원태영
    • 대한전자공학회논문지SD
    • /
    • 제37권10호
    • /
    • pp.1-10
    • /
    • 2000
  • 소자의 크기가 딥 서브 마이크론 이하로 작아짐에 따라 극 저 에너지 이온 주입의 정확한 모델링은 중요함을 더하게 되었다. 본 논문에서는 이체 충돌 근사(Binary Collision Approximation)에 기반을 둔 3차원 몬테카를로 이온 주입 시뮬레이터를 개발하였다. 이를 위하여, 저 에너지 이온 주입에 있어 이체 충동 근사 방법의 제한 요소인 전자 에너지 정지력에 대한 모델을 개선하였고, 다중 충돌 계산을 위한 모델을 적용하였다. 계산된 이온 주입 도펀트 분포 및 결함 분포는 실제 실험치와 일치함을 확인하였다. 또한, 3차원 이온 주입 시뮬레이션에 있어 계산 시간의 효율을 극대화 하고자, 본 연구에서는 이온 분포 복사법(Ion Distribution Replica Method)을 개발하였고, 복잡한 토폴로지를 갖는 다층 에이어의 이온 주입 공정에 있어 빠른 수행 시간 및 결과의 정확성을 확인하였다.

  • PDF