• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1086-1089
• /
• 2006

We have developed 2.4" QVGA wide color gamut LCD module using RGB-LED backlight. The color gamut is achieved 100% of NTSC compared to 70% of NTSC when used with White-LED backlight. But RGB LED backlight is difficult to maintain its color balance since RGB LED is gradually degraded by the change of ambient temperature and a long term aging characteristic, etc. This paper describes a feasibility study of our optical feedback system developed for preventing such a color shift.

• Journal of Satellite, Information and Communications
• /
• v.7 no.3
• /
• pp.145-148
• /
• 2012

In applying LCD to TV application, one of the most significant factors to be improved is image sticking on the moving picture. LCD is different from CRT in the sense that it's continuous passive device, which holds images in entire frame period, while impulse type device generate image in very short time. To reduce image sticking problem related to hold typedisplay mode, we made an experiment to drive TN-LCD like CRT. We made articulate images by turn on-off backlight, and we realized the ratio of Back Light on-off time by counting between on time and off time for video signal input during 1 frame (16.7ms). Conventional CCFL (cold cathode fluorescent lamp) cannot follow fast on-off speed, so we evaluated new fluorescent substances of light source to improve residual light characteristic of CCFL. We realized articulate image generation similar to CRT by CCFL blinking drive and TN-LCD overdriving. As a result, reduced image sticking phenomenon was validated by naked eye and response time measurement.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.309-310
• /
• 2006

This paper presents an enhanced algorithm for compensating the visual quality in backlight image. Current cameras do not represent all details of scene into human's eye. Saturation and underexposure are common problems in backlight image. Retinex algorithm, derived from Land's theory on human visual perception is known to be effective in enhancing the contrast. However, its weaknesses are long processing time and low contrast of bright area in backlight scene because of compensating the details of dark area. In this paper, K-Retinex algorithm is proposed to reduce the processing time and enhance the contrast in both dark and bright area. To show the superiority of proposed algorithm, we compare the processing time and local variance of each area above.

• Transactions on Electrical and Electronic Materials
• /
• v.8 no.4
• /
• pp.166-169
• /
• 2007

In applying LCD to TV application, one of the most significant factors to be improved is image sticking on the moving picture. LCD is different from CRT in the sense that it's continuous passive device, which holds images in entire frame period, while impulse type device generate image in very short time. To reduce image sticking problem related to hold type display mode, we made an experiment to drive TN-LCD like CRT. We made articulate images by turn on-off backlight, and we realized the ratio of Back Light on-off time by counting between on time and off time for video signal input during 1 frame (16.7 ms). Conventional CCFL (cold cathode fluorescent lamp) cannot follow fast on-off speed, so we evaluated new fluorescent substances of light source to improve residual light characteristic of CCFL. We realized articulate image generation similar to CRT by CCFL blinking drive and TN-LCD overdriving. As a result, reduced image sticking phenomenon was validated by naked eye and response time measurement.

• 전자공학회논문지 IE
• /
• v.46 no.4
• /
• pp.57-65
• /
• 2009

This paper presents the image contrast enhancement technique suitable for local dimming backlight of small-sized mobile display while achieving the reduction of the power consumption. In addition to the large-sized TFT-LCD, small-sized one has adopted LED for backlight. Since, conventionally, LED was mounted on the side edge of a display panel, global dimming method has been widely used. However, recently, new advanced method of local dimming by placing the LED to the backside of the display panel and it raised the necessity of sub-blocked processing after partitioning the target image. When the sub-blocked image has low brightness, the supply current of a backlight LED is reduced, which gives both enhancement of contrast ratio and power consumption reduction. In this paper, we propose simple and improved image enhancement algorithm suitable for the small-sized mobile display. After partitioning the input image by equal sized blocks and analyzing the pixel information in each block, we realize the primary contrast enhancement by independently processing the sub-blocks using the information such as histogram, mean, and standard deviation values of luminance(Y) component. And then resulting information is transferred to each backlight control unit for local dimming to realize the secondary contrast enhancement as well as reduction of power consumption.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.710-713
• /
• 2008

LED Scanning Backlight Stereoscopic Display with Shutter Glasses is provided to realize stereoscopic image viewing even in a liquid crystal display. The eye shutter signal is alternately switched from the left eye to the right eye with 120Hz of LCD Vertical synchronization (V-sync).

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1401-1404
• /
• 2008

Temperature Compensation Method of Local Dimming LED Backlight System is proposed. The luminance levels of the LED backlight are not stable over temperature and time due to the inherent characteristics of the LED. The characteristics of LED backlight are investigated and a temperature compensation method is presented. The image distortion caused by temperature variation of LED block can be effectively compensated by the proposed temperature compensation method.

• Journal of KIISE
• /
• v.43 no.11
• /
• pp.1298-1306
• /
• 2016

Backlight has a major factor in power consumption of TFT-LCDs which are most popular in portable devices. There have been a lot of attempts to achieve power savings by backlight dimming. At the same time, the researches have shown image compensation due to decreased brightness of a displayed image. However, existing image compensation methods such as histogram equalization have some limits in completely satisfying the human visual system (HVS)-awareness. This paper proposes an enhanced dimming technique to obtain both power saving and HVS-awareness by combining pixel compensation and histogram specification for TFT-LCDs. This method executes a search algorithm and an automation algorithm employing simplified calculations for fast image processing. Experimental results showed that the proposed method achieved significant improvement in visual satisfaction per power saving over existing backlight dimming.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.12
• /
• pp.5998-6016
• /
• 2017

In thin-film transistor liquid-crystal displays (TFT-LCDs), which are most commonly used in mobile devices, the backlight accounts for about 70% of the power consumption. Therefore, most low-power-related studies focus on realizing power savings through backlight dimming. Image compensation is performed to mitigate the visual distortion caused by the backlight dimming. Therefore, popular techniques include pixel compensation for brightness recovery and contrast enhancement, such as histogram equalization. However, existing pixel compensation techniques often have limitations with respect to blur owing to the pixel saturation phenomenon, or because contrast enhancement cannot adequately satisfy the human visual system (HVS). To overcome these, in this study, we propose a novel dimming technique to achieve both power saving and HVS-awareness by combining the pixel compensation and histogram specifications, which convert the original cumulative density function (CDF) by designing and using the desired CDF of an image. Because the process of obtaining the desired CDF is customized to consider image characteristics, histogram specification is found to achieve better HVS-awareness than histogram equalization. For the experiments, we employ the LIVE image database, and we use the structural similarity (SSIM) index to measure the degree of visual satisfaction. The experimental results show that the proposed technique achieves up to 15.9% increase in the SSIM index compared with existing dimming techniques that use pixel compensation and histogram equalization in the case of the same low-power ratio. Further, the results indicate that it achieves improved HVS-awareness and increased power saving concurrently compared with previous techniques.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.7
• /
• pp.100-106
• /
• 2015

In this paper, we propose a fast algorithm for low-power image enhancement method for mobile LCD. In the proposed fast algorithm, the spatial resolution of the input image is significantly reduced, and the image characteristics are analyzed on the reduced resolution image to find a dimming rate adaptive to the image content, thereby saving power. The proposed fast adaptive dimming and image enhancement algorithm is implemented as an application that runs on an Android device. Image quality evaluation and running time analysis experiments on the device indicate that the proposed fast algorithm jointly minimizes the quality degradation and power consumption, reducing the required computation load by over 95%.