약현성당(사적 제252호)은 1892년에 건립된 현존하는 최초의 서양식 벽돌조 건축물로 한국 근대건축사에 매우 중요한 사료이다. 성당의 제대 후벽에 있는 스테인드글라스는 1974년 처음으로 도입된 이남규의 슬랩글라스(달드베르)로서 1998년 화재로 그을림 및 누수현상이 나타나자 다음해 보수된 바 있다. 색유리의 발색원소 분석 결과, 황색, 적색 및 연두색은 아연(Zn), 칼륨(K), 카드뮴(Cd)으로 확인되었고 셀레늄(Se)이 적색 착색제로 사용되었다. 또한 진녹색 계열의 발색성분은 망간(Mn)과 크롬(Cr), 청색계열은 납(Pb)과 황(S)이 검출되었다. 사이 줄눈의 재료학적 분석결과, 돌로마이트($CaMg(CO_3)_2$)와 방해석($CaCO_3$)으로 동정되었고 판상, 능면상, 주상, 방형 등의 결정질 입자가 확인되었다. 한편 초음파 속도는 스테인드글라스에서 평균 4,130 m/s를 보이며 중앙창 십자가와 우창 하단부에서 저속도대가 나타났으며, 줄눈은 평균 2,053 m/s의 속도범위에서 좌창 상부와 중앙창 가운데에서 가장 낮은 물성을 보였다. 약현성당의 색유리와 사이 줄눈은 육안관찰시 우창에서 집중적인 표면풍화가 나타나는 것과는 달리 물성진단을 통해 좌창 및 중앙창을 중심으로 상당한 물리적 손상이 확인되었다. 앞으로 유리의 조성과 물성의 상관관계에 대한 연구를 통해 꾸준히 보존관리가 필요하다.
최근 다양한 전동 침대의 개발과 보급이 활발하게 이루어지고 있다. 전동침대는 높이조절, 등판상승, 무릅상승, 틸트기능 및 좌우회전의 기능을 가지고 있으며 리모콘을 통해 편리하게 환자가 스스로 또는 보호자가 환자를 움직일 수 있다. 그러나 이미 나와 있는 의료용 전동침대에는 욕창방지, 시트교환, 환자의 이송기능이 없으므로 욕창 방지를 위해서는 욕창 방지 매트릭스를 사용하여 체압을 분산하고, 시트 교환이나 환자의 이송시에는 간병 인력이 붙어 일을 하게 된다. 하지만 이러한 일은 근력과 중노동을 수반함으로서 간호사들이 힘든 간호를 기피하는 현상이 발생하고 있다. 본 연구에서는 이러한 간호 업무를 수월하게 보조하기 위해 욕창방지, 시트교환 및 환자이송을 자동으로 행하는 다기능 병상을 개발하는 것을 목표로 하여 세계 최초의 시제품을 개발하고 시스템이 정상적으로 동작하는 것을 확인하였다. 앞으로 제안된 자동화된 다기능 전동 침상은 스마트 헬쓰케어를 위한 의료용 로봇의 한 모델이 될 수 있을 것으로 기대 된다.
Objectives: The purpose of this study was to examine whether Temporomandibular Joint Balance Appliance-Golf (TBA-G) can improve postural control ability of healthy adults. Methods: Twenty participants (10 male, 10 female) aged 20 to 39 years were involved. Postural control ability of all participants was assessed before and after applying TBA-G with Balance $Master^{(R)}$ system. Modified clinical test sensory interaction on balance (mCTSIB), unilateral stance, weight bearing and rhythmic weight shift were used to evaluate postural control ability. Results: After applying TBA-G, mCTSIB on a firm plate with eyes open increased from 0.2 to 0.23 (p<0.05) but directional control was improved in slow and moderate velocity of front/back rhythmic weight shift test (P<0.05). In two cases with postural imbalance, most of the postural control measures improved after applying TBA-G. Conclusions: The results suggest that TBA-G could improve balance control ability. A larger controlled trial is needed to determine more accurately the effect of TBA-G on balance control ability.
본 논문에서는 압엽형강(H형강)을 이용한 초간편 강합성 교량에 대한 3차원 유한요소해석을 실시하여, 다양한 하중조건에 따른 하중분배값을 검토하였다. 유한요소해석에는 범용구조해석 프로그램 ABAQUS(2007)가 사용되었다. 하중분배계수 검토에 고려된 변수로는 콘크리트 슬래브 두께, 강판 두께, 주형길이, 바닥판 폭, 그리고 교량 연속성이 적용되었다. 해석을 통해 얻어진 하중 분배율은 AASHTO Standard 와 LRFD 설계기준의 제안식 및 기존 연구자들이 제안한 식들과 비교 검토되었다. AASHTO Standard는 매우 안전측의 하중분배율을 제안하고 있으며, AASHTO LRFD의 경우 내측주형의 경우 유사한 결과를 나타내기도 했으나 외측주형의 경우 대부분의 경우 큰 값을 나타내었다. 본 연구를 통해 제안된 하중분배값은 유한요소해석 결과를 토대로 안전측으로 제안되었으며, 설계변수별 상세설계에 적용가능하다. 또한 본 논문에서는 초간편 강합성 H형강 교량의 설계 간편성을 극대화하고 안전성을 고려하여 내측주형의 경우 0.42, 외측주형의 경우 0.32를 제안하였다. 본 연구내용에 검토된 매개변수 범위 내에서 간편 하중분배값의 적용이 가능하며, 본 연구의 결과는 초간편 강합성 H형강 교량의 설계 및 시공 활성화에 크게 기여할 것이다.
The first part is about development of a liquid target for a neutron source, which is designed to overcome many of the limitations of traditional beam-target neutron generators by utilizing a liquid target neutron source. One of the most critical aspects of the beam-target neutron generator is the target integrity under the beam exposure. A liquid target can be a good solution to overcome damage to the target such as target erosion and depletion of hydrogen isotopes in the active layer, especially for the one operating at high neutron fluxes with no need for water cooling. There is no inherent target lifetime for the liquid target neutron generator when used with continuous refreshment of the target surface exposed to the energetic beam. In this work, liquid target containing hydrogen has been developed and tested in vacuum environment. Potentially, liquid targets could allow a point neutron source whose spatial extension is on the order of 1 to $10{\mu}m$. And the second is about the vacuum ultraviolet (VUV) spectrometer which is designed as a five-channel spectral system for ITER main plasma measurement. To develop and verify the design, a two-channel prototype system was fabricated with No. 3 (14.4 nm~31.8 nm) and No. 4 (29.0 nm~60.0 nm) among the five channels. For test of the prototype system, a hollow cathode lamp is used as a light source. The system is composed of a collimating mirror to collect the light from source to slit, and two holographic diffraction gratings with toroidal geometry to diffract and also to collimate the light from the common slit to detectors. The two gratings are positioned at different optical distances and heights as designed. To study the appropriate detector for ITER VUV system, two different electronic detectors of the back-illuminated charge coupled device and the micro-channel plate electron multiplier were installed and the performance has been investigated and compared in the same experimental conditions. The overall system performance was verified by measuring the spectrums.
In this study, the vibration signal of the mold was measured and analyzed to monitoring the process time and characteristics during injection molding. A 5 inch light guide plate mold was used to injection molding and the vibration signal was measured by MPU6050 acceleration sensor module attached the surface of fixed mold base. Conditions except for injection speed and packing pressure were set to the same value and the change of the vibration signal of the mold according to injection speed and packing pressure was analyzed. As a result, the vibration signal had a large change at three points: "Injection start", "V/P switchover", and "Packing end". The time difference between "injection start" and "V/P switchover" means the injection time in the injection molding process, and the time difference between "V/P switchover" and "Packing end" means the packing time. When the injection time and packing time obtained from the vibration signal of the mold are compared with the time recorded in the injection molding machine, the error of the injection time was 2.19±0.69% and the error of the packing time was 1.39±0.83%, which was the same level as the actual value. Additionally, the amplitude at the time of "injection start" increased as the injection speed increased. In "V/P switchover", the amplitude tended to be proportional to the pressure difference between the maximum injection pressure and the packing pressure and the amplitude at the "packing end" tended to the pressure difference between the packing pressure and the back pressure. Therefore, based on the result of this study, the injection time and packing time of each cycle can be monitored by measuring the vibration signal of the mold. Also, it was confirmed that the level and trend of process variables such as the injection speed, maximum injection pressure, and packing pressure can be evaluated as the change of the mold vibration during injection molding.
스마트 모바일 산업의 성장에 따라 부품의 집적화가 가속화 되고 있다. 이러한 부품의 집적화는 부품간의 간섭현상문제를 야기했으며, 이를 해결하기 위한 전자파 차폐 기술의 중요성이 부각되고 있다. 전자파 차폐 기술은 전자파를 반사하거나 흡수하는 방식으로 구현되며, 일반적으로 전도성물질이 전자파 차폐에 활용된다. 최근 산업의 변화에 따라 투명 차폐기술이 요구되고 있으며, 본 연구에서는 임프린팅 기술을 활용한 음각 구조 패턴에 전도성 복합 바인더를 충진 하여 투명 차폐소재를 제안하고자 하였다. 전도성 복합 바인더를 제조하기 위하여 UV 중합 아크릴 바인더를 활용하고 전도성 부여를 위해 구상, 판상 및 적층상의 은 입자를 활용하였다. 은 입자의 구조적인 특징에 따라 경화특성, 전도성 그리고 접착력의 변화를 확인하였다. 경화과정에서는 구상 입자의 활용이 가장 효율적이었으며, UV에 취약한 구조를 보완할 추가적인 경화 시스템이 요구되었다. 전도성평가에서는 적층상 구조가 우수한 특성을 보였다. 접착력은 구상이 가장 우수한 특성을 보였으며, 표면에서의 불규칙성에 따른 결과로 평가된다. 최종적으로 이를 활용한 패턴필름은 우수한 투명특성을 보여주었다.
레일장대화는 무도상교량의 소음, 진동, 충격 등의 문제점을 해결할 수 있는 경제적인 방안 중 하나이며, 최근 연동식 침목고정장치를 이용한 SSF 공법이 개발된 바 있다. 이 연구에서는 연동식 침목고정장치 적용 시 레일 높이 조정 및 열차 통과 시의 충격 흡수를 목적으로 교량침목 하부에 삽입되는 침목패드의 최적 연직강성을 결정하는 과정을 제시하였다. 침목패드의 최적 연직강성 결정을 위하여 관련 기존 기준을 검토하였으며, 유연다물체동적해석을 통하여 침목패드의 연직강성 변화에 따른 주행안전성, 승차감 및 궤도의 안전성에 대한 지표들과 교량 응답 변화를 검토하였다. 유연다물체동적해석은 상용프로그램인 ABAQUS와 VI-Rail을 이용하여 수행하였다. 수치해석은 30m 상로판형교에 대한 교량모델을 이용하여 수행하였으며, 침목패드의 연직강성이 7.5kN/mm ~ 240kN/mm로 변화할 때 ITX 새마을, KTX 및 화차 통과 시의 응답을 산정하였다. 수치해석에 적용된 궤도구성품 조건에서 침목패드의 최적 강성은 100kN/mm로 산정되었다.
백악기 구례분지 구례층군에 대한 쇄설성 저어콘 레이저삭박 다검출기 유도결합플라즈마 질량분석기(LA-MC-ICP-MS) U-Pb 연대측정을 수행하였다. 구례층군은 하부로부터 수평리층, 금정리층, 토금층, 오봉산층으로 구성되며, 이번 연구에서는 연대측정을 위해 총 5개의 시료를 채취하였다. 그 결과 구례층군의 최하부 지층인 수평리층과 최상부 지층인 오봉산층에서는 각각 선캄브리아시대와 후기 백악기 저어콘들만이 산출되어 비교적 좁은 연대 분포 범위를 보였다. 그러나, 금정리층 상하부와 토금층에서는 선캄브리아시대부터 백악기까지의 비교적 넓은 저어콘 연대 분포를 나타냈다. 백악기 저어콘이 산출되지 않은 수평리층을 제외한 각 퇴적층의 가장 젊은 쇄설성 저어콘 U-Pb 연령은 금정리층 하부에서 약 107.4 Ma, 금정리층 상부에서 약 104.6 Ma, 토금층에서 약 97.7 Ma, 오봉산층에서 약 88.5 Ma로 계산되었다. 이는 구례층군의 퇴적시기가 대략 전기 백악기 말의 알바절(Albian)에서 후기 백악기의 코냑절(Coniacian)로 제한될 수 있음을 지시한다. 또한 각 지층별 쇄설성 저어콘 연령 분포에 근거한 구례층군 퇴적물 기원지는 분지의 진화 과정 동안 인근의 영남육괴에서부터 옥천대의 일부까지 확장되어 변화했을 것으로 해석되며, 구례층군을 구성하는 퇴적층들의 백악기 저어콘 산출 양상은 백악기 동안 고태평양판의 슬랩 퇴각 작용을 잘 반영하는 것으로 보인다.
본 연구는 선천성 구개열 환자에서 구개성형술후 구개 길이가 어느 정도 연장되는지 알아보기 위하여 시행되었다. 199i년 4월부터 2004년 4월까지 10년동안 전남대학교병원 구강악안면외과에서 치료 받은 구개열 환자 중 추적조사가 가능한 112명을 대상으로 역학적 특성, 사용된 구개성형술식, 구개 길이의 연장 정도 및 술후 합병증에 대하여 임상기록을 조사하고 분석하였다. 불완전구개열 및 완전구개열 환자의 비는 1.6:1이었다. 성별분포는 완전구개열에서는 남자가 2.1배 많았고, 불완전구개열에서는 여자가 1.2배 많았다. 불완전구개열에서는 Dorrance법과 Wardill법을, 완전구개 열에서는 Wardill법과 Furlow법, two flap법, Perko법을 많이 사용하였다. 구개열 형태별 구개 길이의 연장 정도는 불완전구개열에서 평균 5.84 m(11.295) 연장되어 완전구개열에서의 평균 4.71 w(9.f%)보다 1.13 mm(1.6%) 더 많이 연장되었으나 통계학적 유의성은 없었다. 구개성형술식에 따른 구개 길이의 연장 정도는 Furlow법에서 5.70 m(10.9%) 연장되어 push back법에서의 5.33 in(10.7%)보다0.37 mm(0.2%) 더 많이 연장되었으나 역시 통계학적 유의성은 없었다. 술후 합병증으로 구개누공이 27예(24%b)로 가장 많이 발생하였다. 이상의 결과에서 구개성형술후 구개 길이가 3.5%부터 24.0%까지 평균 10.8% 연장되어 언어 기능에 기여함을 알 수 있다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.