• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1998년도 춘계학술발표회논문집(1)
• /
• pp.52-57
• /
• 1998

In this paper, we performed a design study of a thorium fueled reactor according to the design concept of the Radkowsky Thorium Reactor (RTR) and evaluated its overall performance. To enhance its performance and alleviate its problems, we introduced a new metallic uranium fuel, uranium-zirconium hydride (U-Zr $H_{1.6}$), as a seed fuel. For comparison, typical ABB/CE-type PWR based on SYSTBM 80+ and standard RTR-type thorium reactor were also studied. From the results of performance analysis, we could ascertain advantages of RTR-type thorium fueled reactor in proliferation resistance, fuel cycle economics, and back-end fuel cycle. Also, we found that enhancement of proliferation resistance and safer operating conditions may be achieved by using the U-Zr $H_{l.6}$ fuel in the seed region without additional penalties in comparison with the standard RTR's U-Zr fuelr fuelel

• Computers and Concrete
• /
• 제11권5호
• /
• pp.383-397
• /
• 2013

Two-dimensional tensile stresses are occurring at the back of the anchorage of the tendons of prestressed concrete bridges. A new method named "tensile stress region" for the design of the reinforcement is presented in this paper. The basic idea of this approach is the division of an anchor block into several slices, which are described by the tensile stress region. The orthogonal reinforcing wire mesh can be designed in each slice to resist the tensile stresses. Additionally the sum of the depth of every slice defined by the tensile stress region is used to control the required length of the longitudinal reinforcement bars. An example for the reinforcement design of an anchorage block of an external prestressed concrete bridge is analyzed by means of the new presented method and a finite element model is established to compare the results. Furthermore the influence of the transverse and vertical prestressing on the ordinary reinforcement design is taken into account. The results show that the amount of reinforcement bars at the anchorage block is influenced by the layout of the transverse and the vertical prestressing tendons. Using the "tensile stress region" method, the ordinary reinforcement bars can be designed more precisely compared to the design codes, and arranged according to the stress state in every slice.

• 한국의상디자인학회지
• /
• 제18권2호
• /
• pp.35-49
• /
• 2016

Dopo was the clothing of the Joseon period, which had a strong value of Confucianism. Apart from the kings and princes, government officers and Confucian literati wore Dopo as their official clothing and the uniform. The basic form of Dopo had the straight collar similar to Jikryeong. The difference is the shape of a Mu, which was fixed inside or on the back section along the side line of the front section and made two flaps on the back section. The clothing found in the tombs of Bae Cheonjo (1532~?) are from the mid-16th century to the early 17th century with the clothing style of the early Joseon period. The outer collar of all clothing was the shawl collar except for the Sibok and the inner collar was sewn to this. Two items had square tray collars, which were folded in half and sewn inside in half. The sleeve had a straight inseam from the armhole and its end around the wrist was round and wide. The carp-shaped inseam of the sleeve and wide sleeve indicated a change of sleeve shape. The shapes of the collars and the wide overlapped section of the dual collars demonstrated the shapes of the initial outer robes. The man's outer coats with wide sleeves were mostly cotton-quilted clothing. As described above, this paper examines the basic shapes of outer robes including Sibok, Jikryeong and man's outer coats on the basis of the clothing and artifacts from the tomb of Bae Cheonjo (1532~?) and examined the shapes, composition and features of Dopo. This paper aims to improve awareness of the wisdom and spirit of ancestors in life hidden in the sewing of the three Dopo items and on the importance of historical research.

• 전자공학회논문지C
• /
• 제36C권2호
• /
• pp.26-36
• /
• 1999

본 논문에서는 ATM을 기반으로 구축된 망에서 다양한 서비서 품질(QoS : quality of service)을 가진 데이터를 셀 손실이나 셀 지연의 관점에서 적절한 처리를 수행함으로써 망 자원을 최대한 활용하고 보다 신뢰성 있는 서비스를 제공하기 위하여 OAM 성능관리 기능의 개선 방안을 제안하였다. 또한, 수시로 변화하는 망의 성능정보를 주기적으로 검출함으로써 융통성과 정밀한 제어가 요구되는 망사이의 연관제어 및 운용, 관리기술을 향상시킬 수 있도록 OAM 셀에 특별 셀 영역을 정의하였다. 제안된 OAM 기능과 셀의 입 . 출력 기능, 메모리나 CPU 같은 주변 소자와의 인터페이스 기능 등을 ASIC으로 설계하였다. 설계된 Chip은 Cadence의 Verilog-XL 시뮬레이터를 이용하여 Back-end 시뮬레이션을 수행한 결과 $2{\mu}s$내에 정확한 제어를 수행하였다.

• 한국정보과학회논문지:정보통신
• /
• 제36권5호
• /
• pp.456-469
• /
• 2009

본 논문에서 ECOT(Estimated Channel Occupancy Time)이라는 새로운 무선 링크 성능 지표를 제시하며, 이를 기반으로 멀티 홉 무선 메쉬 네트워크 환경에서 종간간 높은 수율을 얻고자 한다. ECOT의 핵심적인 특징은 다양한 형태의 IEEE 802.11 MAC(Medium Access Control) 환경에서 적용이 가능하다는 점이다. 우리는 802.11 DCF(Distributed Coordination Function), 802.11e EDCA(Enhanced Distributed Channel Access) with BACK(Block Acknowledgement), 802.11n A-MPDU(Aggregate MAC Protocol Data Unit)와 같은 다양한 형태의 링크 계층 구조를 고려하며, 이와 같은 다양한 환경에서 제안하는 ECOT이 기 제안된 다른 성능 지표 방법론과 비교하여 높은 종단간 수율 성능(이득: $8.5{\sim}354.4%$)을 보여줄 수 있다는 것을 확인하였다.

• 전기학회논문지
• /
• 제63권4호
• /
• pp.546-550
• /
• 2014

In this research, we report all the elements are placed in the space above the patient table as a transmit coil to give optimized B1+ field for the body object. Through the simulations, we compared upper-and-lower parts combined 8 channel Tx array to upper only 8 channel Tx array and showed the utilities of B1+ shimming in multi-channel Tx body imaging at 3T. Half-cylinder shaped upper array shows weak B1+ field area around back of patient without B1+ shimming. After B1+ shimming, highly induced SAR places occurred in the arm region due to the close distance to the both end elements which were driven by very high RF current to enhance B1+ in back area. The proposed upper and lower combined array provides an enhanced homogeneous B1+ field in large ROI imaging as a result of shimming over the body size phantom. Through this research we proved the usefulness of the proposed insertional upper and lower parts combined transmit array for 3T body imaging.

• Steel and Composite Structures
• /
• 제3권4호
• /
• pp.261-275
• /
• 2003

Truss members built-up with double angles back-to-back have monosymmetric cross-section and twisting always accompanies flexion upon the onset of buckling about the axis of symmetry. Approximate formulae for calculating the buckling capacity are presented in this paper for routine design purpose. For a member susceptible only to flexural buckling, its optimal cross-section should consist of slender plate elements so as to get larger radius of gyration. But, occurrence of twisting changes the situation owing to the weakness of thin plates in resisting torsion. Criteria for limiting the leg slenderness are discussed herein. Truss web members in compression are usually considered as hinged at both ends for out-of-plane buckling. In case one (or both) end of member is not supported laterally by bracing member, its adjoining members have to provide an elastic support of adequate stiffness in order not to underdesign the member. The stiffness provided by either compression or tension chords in different cases is analyzed, and the effect of initial crookedness of compression chord is taken into account. Formulae are presented to compute the required stiffness of chord member and to determine the effective length factor for inadequately constrained compressive diagonals.

• 한국해양공학회지
• /
• 제13권3B호
• /
• pp.38-46
• /
• 1999

Increasing stringent emissions legislation and requirement of more effective energy used for diesel engine demand the fine control of the fuel injection system. Recently, the electromagnetic fuel injection control system for diesel engine is tried to realize the optimum diesel combustion by the feel back sensing as optical signal of combustion flame. The photo detectors were made for the feed back signal of electromagnetic fuel injection control for small DI diesel engine. Their abilities to detect defining combustion events were examined. By evaluating test results, it was shown that the wider acceptable optical range design of optical probe window face, and selection of installation position and installation method of detector were important point for improving sensing ability. The detector was shown to detect start and end of diffused combustion and maximum point of flame intensity impossible for pressure sensor, and also shown that the maximum point of flame intensity was 75% of accumulated heat release point within the experimental conditions.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1392-1395
• /
• 2004

In order to successfully develop attitude and orbit control subsystem(AOCS), AOCS engineer performs hardware selection, controller design and analysis, control logic and interface verification on electrical test bed, integrated system test, polarity test, and finally verification on orbit after launching. Attitude and orbit control subsystem for KOMPSAT-2 consists of standby mode, sun mode, maneuver mode, science mode, and power safe mode to stabilize and to control the spacecraft for performing the mission. The sun mode is usually divided into sun point submode, earth search submode and safe hold submode. The maneuver mode is divided into attitude hold submode and ${\triangle}$ V submode, while the science mode divided into science coarse submode and science fine submode. Moreover, it is added to back-up mode which uses wheels as an actuator for sun mode and maneuver mode. In this paper, we describe the controller design process and the performance of the design results with respect to the sun mode and the maneuver mode based on thrusters as an actuator using on flexible model.

• 한국통신학회논문지
• /
• 제32권5B호
• /
• pp.286-294
• /
• 2007

ASIP 디자인에서 디자인되는 프로세서의 성능을 측정할 수 있는 컴파일러가 요구된다. 머쉰에 맞는 컴파일러 설계는 매우 많은 시간을 요구한다. 본 논문은 MDL 기술로부터 C 컴파일러를 생성하는 시스템을 보인다. MDL을 이용한 컴파일러 생성은 user retargetability와 컴파일러와 프로세서 디자인의 일관성을 유지시켜 준다. 그러나 MDL을 이용한 컴파일러 생성 시스템은 컴파일러와 머쉰 간 의미적 차이를 줄여야 한다. 이러한 문제를 해결하기 위해 제안하는 시스템은 트리 패턴마다 행위정보를 가지는 라이브러리에 머쉰 행위기술을 맵핑한다. 맵핑된 인스트럭션과 레지스터 파일 사용정보를 이용해 제안하는 시스템은 컴파일러 후위부 interface function을 생성한다. 생성된 MIPS R3000와 ARM9 컴파일러가 C로 기술된 어플리케이션 프로그램으로 검증되었다.