• Journal of the Korean Wood Science and Technology
• /
• 제48권1호
• /
• pp.32-40
• /
• 2020

While the utilization of wood as a raw material in related industries has been increasing with the population increasing, the availability of wood from natural forests has continued to decline. An alternative to this situation is the manufacture of particleboard from non-wood lignocellulose materials through the modification of sandwich particleboard (SPb) using bamboo strands as reinforcement. In this study, strandsof belangke bamboo (Gigantochloa pruriens W) and tali bamboo (Gigantochloa apus) were utilized. The non-wood particles included sugar palm fibers, cornstalk, and sugarcane bagasse. The board was made in a three-layer composition of the face, back, and core in a ratio of 1: 2: 1. The binder used was 8% isocyanate resin. The sheet was pressed at a temperature of 160℃ for 5 min under a pressure of 3.0 N/㎟. Testing included physical and mechanical properties based on the JIS A 5908 (2003) standard, while acoustic testing was based on ISO 11654 (1997) standards. The results showed that using bamboo strands as reinforcement has an effect on the mechanical and physical properties of SPb. Almost all the types of boards met the JIS A 5908 (2003) standards, with the exception of thickness swelling (TS) and internal bond (IB) parameters. Based on the thickness swelling parameter, the C-type board exhibited the best properties. Overall, the B-type board thatused a belangke bamboo strand for the surface and sugarcane bagasse as the core underwent the best treatment. Based on the acoustical parameter, boards using a tali bamboo strand for the surface and sugar palm fiber as the core (E-type board) exhibited good sound absorption properties.

• 한국자기공명학회논문지
• /
• 제25권4호
• /
• pp.58-63
• /
• 2021

Apolipoprotein B-100 (apo B-100), the main protein component that makes up LDL (Low density lipoprotein), consists of 4,536 amino acids and serves to combine with the LDL receptor. The oxidized LDL peptides by malondialdehyde (MDA) or acetylation in vivo act as immunoglobulin (Ig) antigens and peptide groups were classified into 7 peptide groups with subsequent 20 amino acids (P1-P302). The biomimetic peptide P143 (IALDD AKINF NEKLS QLQTY) out of C-group peptides carrying the highest value of IgG antigens were selected for structural studies that may provide antigen specificity. Experimental results show that P143 has β-sheet in Ile[1]-Asn[9] and α-helice in Gln[16]-Tyr[20] structure. Homonuclear 2D-NMR (COSY, TOCSY, NOESY) experiments were carried out for NMR signal assignments and structure determination for P143. On the basis of these completely assigned NMR spectra and proton distance information, distance geometry (DG) and molecular dynamic (MD) were carried out to determine the structures of P143. The proposed structure was selected by comparisons between experimental NOE spectra and back-calculated 2D NOE results from determined structure showing acceptable agreement. The total Root-Mean-Square-Deviation (RMSD) value of P143 obtained upon superposition of all atoms were in the set range. The solution state P143 has a mixed structure of pseudo α-helix and β-turn(Phe[10] to Glu[12]). These results are well consistent with calculated structure from experimental data of NOE spectra. Structural studies based on NMR may contribute to the prevent oxidation studies of atherosclerosis and observed conformational characteristics of apo B-100 in LDL using monoclonal antibodies.

• 응용화학
• /
• 제15권1호
• /
• pp.17-20
• /
• 2011

A disposable light exposure detector kit has been developed by UV curing of a hydrogel material. The devised light exposure detector kit consisted of light sensitive structures, bottom plate, character sheet and sticky back plate. A light exposure detector kit has a serial light sensitive structures that contain various light sensitive dyes such as rhodamine and fluorescein. The light sensitive structure composed of UV curable hydrogel polymer material as a supporing material and photosensitive dye in a certain concentration. The fabrication procedure of the ligh exposure detector kit is very simple and fast due to UV curing procedure of a photopolymerizable hydrogel material such as poly(ethylene glycol) methyl ether acrylate (PEGMEA) and poly(ethylene glycol) diacrylate (PEGDA) with a photosensitive dye. By the proposed fabrication method, various size and shape of a light exposure detector kit could be fabricated using a flexible elastomer mold. Due to a fast and inexpensive fabrication method, the light exposure detector kit could be use a single use for various industrial applications. According to light irradation, the light sensitive structure on a light exposure detector kit could be lose its color by decomposition of a photosensitive dye chemical in the structure. Thus the amount of the exposed light on a substrate could easily be recognised by changing color or transparency of the structure.

• 한국진공학회지
• /
• 제20권3호
• /
• pp.233-241
• /
• 2011

태양전지 모듈은 back sheet, 후면 충진재, 태양전지 cell, 전면 충진재, 전면 보호유리의 구성으로 되어 있다. Back sheet는 유리 또는 금속을 사용하는데 사용 재료에 따라 각각 유리봉입방식, 슈퍼스트레이트방식으로 구분된다. 태양전지를 보호하기 위한 충진재는 빛의 투과율 저하가 적은 poly vinyl butylo나 내습성이 뛰어난 ethylene vinyl acetate 등이 주로 이용된다. 유리봉입방식과 슈퍼스트레이트 방식의 공통점은 모듈 전면에 투과율과 내 충격 강도가 좋은 강화 유리를 사용하는 것이다. 하지만 현재 모듈의 전면 유리는 평탄한 표면 때문에 태양고도가 낮을 때 상대적으로 반사율이 높은 단점을 가지고 있다. 이러한 문제점을 해결하기 위한 방안으로 표면 유리에 요철(anti-glare) 구조를 형성하면 평면(bare) 구조의 표면에서 반사되는 태양광이 일부 태양전지 내부로 재입사가 일어나게 되어 표면 반사율이 낮아지게 되고, 이로 인하여 태양전지의 효율이 증가하게 된다. 특히 이러한 효과는 태양고도가 낮아졌을 때 요철(anti-glare) 구조에 의한 반사율의 감소가 증가하기 때문에 평면 구조보다 요철(anti-glare) 구조의 태양전지 모듈의 효율이 향상될 것이다. 본 논문에서는 요철(anti-glare) 구조의 유리와 평면 구조의 유리에서 태양고도의 고도 변화에 따른 반사와 투과 특성을 확인하기 위하여 입사광의 각도에 대한 반사율과 투과율을 측정하여 비교 분석하였다. 그리고 태양전지 cell 위에 요철(anti-glare) 구조의 유리와 평명 구조의 유리를 각각 위치 시킨 후 태양전지 cell의 효율 변화를 확인하였다. 태양전지 cell의 표면 구조에 따라 요철 구조의 유리 기판의 특성을 비교하기 위하여 태양전지 cell의 표면을 이방성 식각 용액을 이용하여 역피라미드 구조의 텍스쳐링 태양전지 cell과 평면 구조의 태양전지 cell을 각각 사용하여 비교하였다.

• Journal of Pharmaceutical Investigation
• /
• 제27권4호
• /
• pp.303-311
• /
• 1997

Proliposomal patch of clenbuterol, ${\beta}_2-agonist$ bronchodilator, was prepared and its feasibility as a novel transdermal drug delivery system was examined. Proliposomal granules containing clenbuterol was prepared by a standard method using sorbitol and lecithin with (Rx 2) or without cholesterol (Rx 1). The porous structure of sorbitol in the proliposomes was maintained allowing tree flowability of the granules. Following contact with water, the granules were converted probably to liposomes almost completely within several minutes. It indicates that proliposomes may be hydrated, when they are applied on the skin under occlusive condition in vivo, by the sweat to form liposomes. Clenbuterol release from Rx 1 and Rx 2 proliposomes to pH 7.4 isotonic phospate buffer (PBS) across cellulose membrane (mol. wt. cut-off of 12000-14000) was retarded significantly compared with that from the mixture of clenbuterol powder and blank proliposomes. Interestingly, proliposomes prepared with lecithin and cholesterol (i.e., Rx 2 proliposomes) showed much more retarded release of clenbuterol than proliposomes prepared only with lecithin (i.e.. Rx 1 proliposomes), indicating that clenbuterol release from proliposomes can be controlled by the addition of cholesterol to the proliposomes. Proliposomal patches were prepared using PVC film as an occlusive backing sheet, two sides adhesive tape (urethane, 1.45 mm thickness) as a reservoir for proliposome granules and Millipore MF-membrane (0.45 mm pore size) as a drug release-controlling membrane. Rx 1 or Rx 2 proliposomes containing 4.6 mg of clenbuterol were loaded into the reservoir of the patch. Clenbuterol release from the patches to pH 7.4 PBS was determined using USP paddle (50 rpm)-over-disc release method. Clenbuterol release from the proliposomal patches was much more retarded even than from a matrix type clenbuterol patch (Boehringer Ingelheim ltd). Being consistent with clenbuterol release from the proliposomal granules, the release from the patches was highly dependent on the presence of cholesterol in the proliposomes : Patches containing Rx 2 proliposomes showed several fold slower drug release than patches containing Rx 1 proliposomes. When the patch containing Rx 1 proliposomes was applied on to the back of a hair-removed rat, clenbuterol concentration in the rat blood was maintained during 6-72 hrs. Transdermal absorption of clenbuterol from the patch was accelerated when the patch was prehydrated with 50 ml of pH 7.4 PBS before topical application. Above results indicate that sustained transdermal delivery of clenbuterol is feasible using proliposomal patches if the cholesterol content and pore size of the release rate-controlling membrane of patches, for example, are appropriately controlled.

• 한국인터넷방송통신학회논문지
• /
• 제18권5호
• /
• pp.215-222
• /
• 2018

최근 다양한 전동 침대의 개발과 보급이 활발하게 이루어지고 있다. 전동침대는 높이조절, 등판상승, 무릅상승, 틸트기능 및 좌우회전의 기능을 가지고 있으며 리모콘을 통해 편리하게 환자가 스스로 또는 보호자가 환자를 움직일 수 있다. 그러나 이미 나와 있는 의료용 전동침대에는 욕창방지, 시트교환, 환자의 이송기능이 없으므로 욕창 방지를 위해서는 욕창 방지 매트릭스를 사용하여 체압을 분산하고, 시트 교환이나 환자의 이송시에는 간병 인력이 붙어 일을 하게 된다. 하지만 이러한 일은 근력과 중노동을 수반함으로서 간호사들이 힘든 간호를 기피하는 현상이 발생하고 있다. 본 연구에서는 이러한 간호 업무를 수월하게 보조하기 위해 욕창방지, 시트교환 및 환자이송을 자동으로 행하는 다기능 병상을 개발하는 것을 목표로 하여 세계 최초의 시제품을 개발하고 시스템이 정상적으로 동작하는 것을 확인하였다. 앞으로 제안된 자동화된 다기능 전동 침상은 스마트 헬쓰케어를 위한 의료용 로봇의 한 모델이 될 수 있을 것으로 기대 된다.

• 한국초등수학교육학회지
• /
• 제22권1호
• /
• pp.1-24
• /
• 2018

2015년 1학기와 2학기에 J 교육대학에서 실시한 교육실습 1과 교육실습 2에 모두 참여한 11명의 초등 예비교사들을 대상으로 수학 수업전문성 지식들로 구성된 반성적 수학 수업 분석지를 활용하여 수업 반성을 하게 한 후, 수학 수업 횟수에 따른 초등 예비교사들의 수학 수업전문성 지식의 활용 양상을 연구하였다. 그 결과는 다음과 같다. 첫째, 수학 수업 실습의 횟수가 증가함에 따라 실습에 참여한 예비교사들의 수학 수업전문성 지식 활용이 증가하였고, 7명의 수학 수업전문성 지식 활용도는 크게 증가하였다. 그러나 수학 수업전문성 지식 활용이 증가한 하위영역의 개수는 최소 2개에서 최대 7개까지 예비교사에 따라 달랐다. 둘째, 수학 수업 실습을 2회나 3회 실시한 예비교사들보다 4회 실시한 예비교사들의 수학 수업전문성 지식의 활용도가 더 높았다. 셋째, 2회나 3회 수업한 일부 예비교사들은 수학 수업전문성 지식의 활용도가 증가한 하위영역에서 조차도 수업 실습 전체 과정 동안 단 한 번도 해당 하위영역 만점의 90%에 도달하지 못하였다. 넷째, 수학 수업에서 실습에 참여한 예비교사들이 가장 어려움을 느낀 하위영역은 '수업 전 반성 - 교수관점 - 수학교과 지식의 이해'로 분석되었으며, 그 이유로는 대부분의 예비교사들이 수학적 개념의 역사적 배경에 관한 자료 부족을 호소했다.

• 한국진공학회지
• /
• 제6권2호
• /
• pp.143-150
• /
• 1997

본 연구에서는 1000$\AA$두께의 Molybdenum화합물(Mo, Mo-N,$MoSi_2$, Mo-Si-N)의 Cu에 대한 확산방지막으로서의 특성을 면저항측정장비(four-point-probe), XRD, XPS, SEM, RBS 분석을 통하여 조사하였다. 각 박막층은 dc magnetron sputtering장비를 이용하 여 증착되었고 $300^{\circ}C$-$800^{\circ}C$의 온도구간에서 30분동안 진공열처리하였다. Mo 및 $MoSi_2$ 방지 막은 낮은 온도에서 확산방지막으로서의 특성파괴를 보였다. 결정립계를 통한 Cu의 확산과 Mo-실리사이드내의 Si의 Cu와의 반응이 그 원인인 것으로 사료된다. 질소를 첨가한 시편의 경우 확산방지특성 파괴온도는 Mo-N방지막의 경우 $650^{\circ}C$-30분, Mo-Si-N방지막의 경우 $700^{\circ}C$-30분으로 향상되었다. Cu와 Si의 확산은 방지막의 결정립계를 통하여 더욱 빠르게 확 산된다. 따라서 증착시 결정립계를 질소와 같은 물질로 채워 Cu와 Si의 확산을 저지할 수 있을 것으로 사료된다. 본 실험결과에서의 질소첨가는 이와 같은 stuffing 효과외에도 Mo- 실리사이드 박막의 결정화 온도를 다소 높인 것으로 나타났고, 그 결과 결정립계의 밀도를 감소시켜 확산방지막으로서의 특성을 향상시킨 것으로 사료된다. 또한 질소첨가는 실리사이 드내의 금속과 실리콘과의 비를 변화시켜 확산방지막의 특성에 영향을 미친 것으로 보인다. 본 실험에서 조사된 확산방지막 중에서는 Mo-Si-N박막이 Cu와 Si간의 확산을 가장 효과적 으로 저지시킨 것으로 나타났으며 $650^{\circ}C$-30분까지 안정한 특성을 보였다.

• Design & Manufacturing
• /
• 제12권2호
• /
• pp.40-45
• /
• 2018

Recently, in construction equipment machinery production, development has focused on environmentally-friendly functions to improve existing production capacity. For excavators as well, emphasis has been placed on response to environmental regulations, miniaturization, and noise reduction, while technology is being developed considering cost reduction and safety.Accordingly, the front support, an inner reinforcement part of the excavator, as well as high-strength steel plates to improve safety and reduce weight, are being applied.However, in the case of high-strength materials, Springback occurs in the final formed part due to high residual stress during product forming. Derivation of a forming or product shaping process to reduce springback is needed. Accordingly, regarding the front support, an inner reinforcement part of the excavator, this study derived a method to improve springback and secure shape stiffness through analysis of the springback occurrence rate and springback causes through a forming analysis.As for the results of analyzing the springback occurrence rate of existing products through forming analysis, springback of -22.6 mm < z < 27.35 mm occurred on the z-axis, and it was confirmed that springback occurred due to the stiffness reinforcing bead of the upper and middle parts of the product.To control product residual stress and springback, we confirmed a tendency of springback reduction through local pre-cutting and stiffness reinforcement bead relocation.In the local pre-cutting model, springback was slightly reduced by 5.3% compared with the existing model, an insignificant reduction effect. In the stiffness reinforcement bead relocation model, when an X-shaped stiffness reinforcement bead was added to each corner portion of the product, springback was reduced by at least 80%.The X-shaped bead addition model was selected as the springback reduction model, and the level of stiffness compared to the existing model was confirmed through a structural analysis.The X-shaped bead additional model showed a stress springback of 90% and springback reduction of 7.4% compared with the existing model, indicating that springback and stiffness will be reinforced.

• Design & Manufacturing
• /
• 제12권1호
• /
• pp.52-57
• /
• 2018

With the recent strengthening of environmental regulations and the need for cost reduction, excavators, a type of construction equipment, are being miniaturized while components are being developed in consideration of stability. In the case of excavator press parts, mainly high-strength steel sheets are being used to enhance stability and reduce weight. However, in the case of high-strength materials, there is a need to research product forming methods to reduce Springback in defects arising in parts assembly due to Springback that result from the internal residual stress that occurs in press forming being released after product forming. Accordingly, regarding the tank cover, an excavator press-forming part, this study selected a method to reduce distortion through analysis of the Springback occurrence rate and Springback causes through a forming analysis. A forming analysis was conducted for the Springback of the tank cover. Deformations of 13.714 mm in the upper part and 6.244 mm in the inner part of the product occurred, while wrinkles occurred on the sides of the product due to uneven thickness. A forming analysis was conducted for the major shapes of the product to investigate the causes of Springback. Distortion deformation due to the bead in the center of the product was confirmed to be a large factor. A Springback reduction method of correcting uneven thickness in the product sides, a Springback reduction method of removing the bead, and a correction method of restriking after the final forming were used in a forming analysis to determine the degree of Springback reduction. For the forming method to correct uneven thickness in the sides, deformation was reduced by 12% in the upper side compared to the existing model, but deformation in the inner side increased by 1%. For the restriking forming method, deformation decreased by 25% in the upper side and 13% in the inner side. For the bead removal method, deformation decreased by 28% in the upper side and 13% in the inner side, the largest Springback correction results. This indicates that the bead has a large affect on Springback.