• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2003년도 학술발표논문집
• /
• pp.155-158
• /
• 2003

In this study consolidation back analyses were performed with the data measured in the reservoir construction field. some effects due to gradual step loading were considered carefully in this back analysis. the replacement depth of soft ground was estimated from the difference between the measured and the back analyzed data

• 소성∙가공
• /
• 제21권7호
• /
• pp.397-402
• /
• 2012

The flange hub is a main component in an automotive steering system. In general, the flange hub are fabricated by mechanical machining, which is a process where material waste is inevitable. It is well-known that a net-shape cold forging cannot only reduce material waste but can also improve the mechanical strength of the final product. Thus, a forging process design was conducted for production of a flange hub. Significant spring-back occurs around the flange due to its small thickness in conjunction with the residual stresses after forging. In order to achieve the required dimensional accuracy, a process design with appropriate spring-back control is needed. In this study, a modification of the forging die was designed based on FE analysis with the purpose of spring-back compensation. Four kinds of different die designs were evaluated and the optimum design has two times less spring-back than the initial design. The compensation angle of the optimum design is 0.5 degrees. The results have been experimentally confirmed by cold forging of a flange hub and comparing the amount of spring-back between the actual component and the FE analysis.

• Journal of Acupuncture Research
• /
• 제19권2호
• /
• pp.128-136
• /
• 2002

Objective : The purpose of this study was to evaluate water distribution differences of the right and left low limb in patients who had low back pain with sciatica or not. Methods : Water distribution differences of the right and left low limb by body composition(INBODY 2.0, Biospace, seoul, korea) were analysed in the views of groups(low back pain with and without sciatica) and duration of disease. Results : 1. In the case of low back pain patient, there was no significance in variance of water distribution of the right and left lower limbs regardless of suffering period, but significance difference in patients that have suffered low back pain with one side sciatica showed according to suffering period. 2. Within 2 weeks, there was no significant deflection between low back pain with and without sciatica in water distribution of the right and left lower limbs, More than 2 weeks significant deflection showed. Conclusion : Loss of lower limb's muscle that ensue in contracting a disease period was observed in Low Back Pain with Sciatica. The continuos studies about pathological change of lower limb in low back pain have to be perfomed.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.494-504
• /
• 2008

Successful design, construction and maintenance of NATM tunnel demands prediction, control, stability estimation and monitoring of surface settlement, gradient and ground displacement with high accuracy. Back analysis using measured data and forward analysis have been and are indispensable tools to achieve this goal. Sakurai provided the hazard warning levels for assessing the stability of tunnels using the relation of critical strain and apparent Young's modulus. This paper performed the estimation of tunnel stability on construction. Firstly, the apparent Young's modulus concept and back analysis method is introduced for the assessment of tunnel safety during excavation a brief framework. Secondly, this paper deals with case study using "Apparent Young's modulus" and "Back analysis" for the purpose of estimating the stability of NATM tunnel in Korea. Finally, a general method that can be estimated the tunnel stability discussed by a flow chart.

• 국제물리치료학회지
• /
• 제1권2호
• /
• pp.162-168
• /
• 2010

Low back pain is a common phenomenon among the golfers. In an attempt to understand low back pain, the kinematic changes and golf swing motion analysis has been performed to focus on lumbar spine in pro. golfers. According to the swing pattern, significant variations of the lumbar joint forces and loads has related with muscles activities so the motion analysis of lumbar spine were discussed. The purpose of this study was to analyze motion of lumbar spine and it was to compare joint force during golf swing in pro. golfers. The swing motion of the subjects was tracked using a 3D motion analysis system by Motion Analysis Ltd. and SIMM software. The angle changes of lumbar spine rapidly in vx direction during the top back swing and the finish and in vy direction during the follow through and in vz direction during the down swing and the impact(Subject A). The angle changes of lumbar spine rapidly in vx direction during the top back swing and in vy direction during the down swing, the impact and the follow through and in vz direction during the down swing(Subject B). In conclusion, subject A and B both show sudden angle changes between 1st-3rd lumbar spine and 4th-5th lumbar spine during the stage from address to top back swing which caused by over upper body twisting.

• 한국지반공학회논문집
• /
• 제25권9호
• /
• pp.93-100
• /
• 2009

본 연구에서 역해석에 이용한 직접법은 실제 변위와 목적함수의 차이를 최소화하고 미지변수를 보정하는 최적화가 핵심 과정이다. 연구과정이 복수의 지층을 단계별로 역해석하여 각 지반의 미지변수를 역해석하기 때문에 지층 간 미지변수의 간섭 효과를 최소화 할 수 있는 추가적인 최적화가 필요하다. 따라서 효율적이고 정확한 최적화를 위해서 목적함수의 편미분 계산과정이 없이 최적해를 구할 수 있는 직접탐색법(direct search method)을 사용하였다. 본 연구의 목적은 지하구조체가 포함된 지층을 상부와 하부의 지층으로 모형화하고, 다중 미지변수를 역해석하는 기법을 개발하는 데에 목적을 둔다. 또한 단계별 역해석된 미지변수의 상호 간섭 오차를 최소화하기 위해서 반복 역해석을 실시하고, 실제 존재하는 터널에 대하여 적용성에 대해 검토하였다. 그 결과, 단층 모형화보다 다층 모형화 결과가 실제 지하구조물거동을 정확히 나타냈으며 다층 경계부에 위치한 지하구조물의 다층지반 모형화를 통한 역해석이 유효함을 확인하였다.

• 한국산업보건학회지
• /
• 제22권2호
• /
• pp.107-118
• /
• 2012

Objectives: This study examines the occurrence of disease resulting from low back pain and factors of working environment meaningfully influencing the occurrence of lumbago as well as analyzes '2nd Korean Working Condition Survey (KWCS)' conducted in 2010 so as to establish the prevention and improvement measures. Methods: The analysis method is that it is to compare the prevalence rate of low back pain according to working environment via odds ratio and to implement the test about the factors having the difference in working environment between low back pain group and normal group through weighted t-test. Results: As a result, it indicates that there is a meaningful difference for prevalence rate of low back pain according to age, status in employment and education level which are socio-demographical factors. The analysis in working hours shows that the period of work is a factor raising the prevalence rate of low back pain rather than weekly working hours. The analysis in the work risk factor indicates that the increase in prevalence rate of low back pain takes place to either workers with repetitive movement and continuously standing posture or those with heavy stress and emotional labour. Conclusions: Workers with low back pain have suffered from accident, depression, anxiety disorder and sleep. The factors in which the prevalence rate of low back pain decrease are to provide information on health and safety and working speed, and enough rest.

• 한국운동역학회지
• /
• 제30권1호
• /
• pp.63-72
• /
• 2020

Objective: The purpose of this study was to investigate meta-analysis on the effects of exercise therapy and physiotherapy on pain in korean patients with chronic low back pain. Method: Meta-analysis was performed on the type and method of treatment. A total of 23 experimental studies were coding into 31 individual studies, into types, methods, visual analogue scale (VAS), each pre/post value of the effect size was calculated by meta-analysis. Results: Sling exercise, stretching, thermal therapy, kinesio-taping, lumbar stabilization exercise, electrotherapy is large effect size (ES ≥ .08). In addition, big effects occurred in order of treatment period is more than 9 weeks, three times a week. Conclusion: Our results indicated that persistent treatment of chronic back pain is the most effective method of self-sufficiency rather than temporary relief.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 추계학술대회 논문집
• /
• pp.470-473
• /
• 2009

In this paper, back pressure forging processes of which back pressures are exerted by mechanical forces including spring reaction are simulated by three-dimensional finite element method. The basic three-dimensional approach extended from two-dimensional approach is accounted for. An axisymmetric backward and forward extrusion process having a back pressing die, which is exposed to oscillation of forming load due to variation of reduction ratios with stroke and its related frequent variation of major deforming region, is simulated by both two and three dimensional approaches to justify the presented approach by their comparison. A three-dimensional forging process having a back pressing die attached to the punch by a mechanical spring is simulated and the results are investigated to reveal accuracy of the presented approach.

• 한국공작기계학회논문집
• /
• 제16권3호
• /
• pp.81-87
• /
• 2007

It is important to investigate the relationship between weld process parameters and weld bead geometry for adaptive arc robot welding. However, it is difficult to predict an exact back-bead owing to gap in process of butt welding. In this paper, the quantitative prediction system to specify the relationship external weld conditions and weld bead geometry was developed to get suitable back-bead in butt welding which is widely applied on industrial field. Multiple regression analysis and artificial neural network were used as the research methods. And, the results of two prediction methods were compared and analyzed.