• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.761-763
• /
• 2004

최근에 위성용 필터로서 유전체 공진기 내장 도파관 필터가 많이 연구되고 있다. 이 필터의 튜닝을 위하여 튜닝 스크류가 일반적으로 사용되어져 왔는데 튜닝 스크류의 사용은 복잡한 필터의 튜닝 시 너무 소모적인 작업을 야기시키고 미세한 튜닝에 어려움이 있어서 다른 해결책을 필요로 한다. 또한 제품의 사용 시에는 온도등의 외부환경의 변화에 대하여 대처를 하기 위하여 전기적인 튜닝을 이용한 튜닝의 자동화에 대한 필요성이 대두되었다. 이에 대한 해결책으로 BST($Ba_xSr_{1-x}TiO_3$)라는 강유전체를 이용하는 튜닝에 대하여 소개하고 한 경우에 대하여 FDTD 방시의 EM 시뮬레이션을 구하여 그 결과로서 전기저인 필터 튜닝의 가능성을 보여준다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 D
• /
• pp.1255-1257
• /
• 1998

In this study,$ 5{\times}5$ dot-matrix display was implemented with powder electroluminescent device (PELD). Generally PELD which have a luminance from powder phosphor with electric field, inserted phosphor and dielectric layer between electrodes is basic structure. To make high brightness PELD compared to conventional device, new type of PELD was proposed as follows. New PELD had only one layer, which was mixed phosphor (ZnS:Cu) and dielectric (BaTiO3) material appropriately between electrodes. To compare and estimate the conventional and new type of PELD, the EL spectrum, transferred charge density, brightness and decay time was measured. As above result, we fabricated a hish brightness $ 5{\times}5$ dot-matrix display with new type of PELD. Its brightness was 6400 $cd/m^2$ at 200 V, 400Hz.

• 전자공학회논문지A
• /
• 제31A권5호
• /
• pp.101-105
• /
• 1994

The EL lamp have been fabricated by screen printing method. the thickness of BaTiO$_3$ dielectric layer and ZnS:Cu phosphor layer was 20 $\mu$m and 40 $\mu$m, respectively. The threshold voltage of green El lamp was 50 $V_{p-p}$ and the maximum brightness was 13.5 $\mu$ W/cm$^2$ at frequency of 700 Hz and the input voltage of 250 $V_{p-p}$. Also when the Rodamin G6 of 0.02 g was doped, the threshold voltage of white EL lamp was 70 $V_{p-p}$ and the maximum brightness was 34 $\mu$W/cm$^2$.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 C
• /
• pp.1530-1532
• /
• 2002

전력선 통신 시스템을 간략히 살펴보면 송전단과 수전단으로 나누어 볼 수 있다. 송전단은 전력을 송전하기 위한 설비와 신호를 싣고 분리하는 결합회로로 구성되며 수전단은 수전설비와 결합회로로 분리된다. 결합회로는 $BaTiO_3$를 주성분으로 하는 고유전율 및 대용량의 캐패시터로 구성되었다. 이 캐패시터를 변압기 외부에 사용하므로, 직사광선에 의한 온도 변화가 생길 것이며 이 변화에 따라 캐패시턴스 값의 변화가 생길 것이므로 HPF로 사용할 때 캐패시턴스 값의 변화로 주파수에 영향을 줄 것이다. 주위온도에 따른 캐패시턴스의 변화가 HPF의 동작에 어떠한 영향을 미치는지 고찰하고자한다. 이에 본 연구에서는 수전단의 10KV이하 배전 선로에 사용되는 Coupling Capacitor의 외부온도를 변화시켜 전기적 특성의 변화를 고찰함으로서, HPF로서의 사용될수 있는지 확인하고자 한다.

• 한국전기전자재료학회논문지
• /
• 제17권10호
• /
• pp.1061-1067
• /
• 2004

In this study, ferroelectric (Ba,Sr)TiO$_3$ and high temperature superconductor YBCO thin films were fabricated by PLD (Pulsed Laser Deposition) method and tuneable bandstop filters were implemented with two different IDC(Interdigital Capacitance) gap patterns, 20${\mu}{\textrm}{m}$ and 30${\mu}{\textrm}{m}$ using these two thin film layers. The resonant frequency was changed by DC bias voltage. By comparing measured results with simulation, the dielectric properties of ferroelectric thin film have been extracted. The permittivity was 820 ～ 900 at 30 K and had an acceptable error range but the loss tangent had a great difference, 0.018 in 30${\mu}{\textrm}{m}$ IDC gap pattern and 0.037 in 20 ${\mu}{\textrm}{m}$.

• 한국분말재료학회지
• /
• 제1권1호
• /
• pp.21-26
• /
• 1994

Aluminum was deposited on aluminum oxide powders using a fluidized bed reactor at atmospheric pressure. The aluminum oxide powders were irregular flakes with acute angles and the average particle size was 26 $\mu\textrm{m}$. The fluidized bed was formed by flowing argon gas at the velocity of 60 cm/sec. The optimal fluidization condition was obtained with the reactor designed to be tapered so that the fluid velocity decreases as the fluidizing gas goes up along the reactor. Aluminum was deposited by flowing TiBA(Triisobutylaluminum) evaporated at$250^{\circ}C$ through the fluidized bed reactor heated to 350~$450^{\circ}C$. The result from the analysis by XRD and EDAX confirmed the coating of aluminum and an SEM micrograph showed the conformality.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.72-74
• /
• 2014

Multilayer ceramic capacitor (MLCC) makes acoustic noise of electronic devices. Conversed piezoelectric effect of dielectric substance consists of $BaTiO_3$ causes vibration of MLCC so it must be analyzed to reduce the noise. Thus, finite element model for piezoelectric analysis of MLCC was constructed in this paper. Piezoelectric characteristics of MLCC was considered for the accurate simulation result. Displacement response for sinusoidal voltage signal was measured and simulation result was verified with test result.

• 한국세라믹학회지
• /
• 제46권2호
• /
• pp.155-160
• /
• 2009

The reliability could be one of the essential properties for multilayer ceramic capacitor (MLCC) using in various electronic devices and the concentration and mobility of oxygen vacancy would play important role in the reliability. To investigate the migration behavior of oxygen vacancies, thermally stimulated depolarization current (TSDC) is adopted. In dielectric material of X5R MLCC, the TSD-Current peak observed around 150$^{\circ}C$ and 200$^{\circ}C$ which represented the migration of oxygen vacancy. Substituting Yttrium for Dysprosium in X5R MLCC showed higher migration activation energy and lower TSD current density.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 춘계학술대회 논문집 유기절연재료 전자세라믹 방전플라즈마 연구회
• /
• pp.114-117
• /
• 2001

$(Ba_{0.6-x}Sr_{0.4}Ca_x)TiO_3$(x=0.10, 0.15, 0.20) ceramics were fabricated by the mixed-oxide method and their structural and dielectric properties were investigated with variation of composition ratio and sintering temperature. As a result of the differential thermal analysis(DTA), exothermic peak was observed at around $1020^{\circ}C$ due to the formation of the polycrystalline perovskite phase. BSCT(50/40/10) specimen sintered at $1500^{\circ}C$ showed the highest average grain size(18.25$[{\mu}m]$). Curie temperature and dielectric constant at room temperature decreased with increasing amount of Ca. BSCT(50/40/10) specimen sintered at $1450^{\circ}C$ showed a good dielectric constant, K, (=4324) and dielectric loss, $tan{\delta}$, (=0.972%) properties at 1[KHz].

• 한국전기전자재료학회논문지
• /
• 제28권12호
• /
• pp.843-846
• /
• 2015

In this paper, the failure mechanism of PTC heater were examined closely by failure analysis and based on it, accelerated life test were conducted. Finally, life distribution and acceleration model were established. The failure mechanism of PTC heater such as crack, increase of resistance due to heating were identified. Two acceleration factors such as temperature, humidity were chosen with two levels each and accelerated life test were done. Life distribution were identified as Weibull distribution with shape parameter 5.4 and Temperature-Humidity model was fitted as an acceleration model.