• Journal of Life Science
• /
• v.28 no.8
• /
• pp.923-930
• /
• 2018

In this study, Tenebrio molitor (T. molitor) was fermented with Lactobacillus plantarum JBMI F3 (F3), Lactobacillus plantarum JBMI F5 (F5), Lactobacillus gasseri Ba9 (Ba9), Aspergillus kawachii KCCM 32819 (Ak), Saccharomyces cerevisiae KACC 93023 (Sc), and Bacillus subtilis KACC 91157 (Bs). After fermentation, the fermented products were extracted by water, ethanol, and methanol, and their physicochemical and biological properties were investigated. In a DPPH assay, the water extracts of the fermented products of T. molitor showed high antioxidant ability. Among the water extracts, the fermented product by Bs showed the highest DPPH radical scavenging activity. The total contents of phenolic compounds and flavonoids were highest in the fermented products by Ak and Bs, respectively. Reducing activity was detected the most high activity on ethanol extract of fermented product by Bs. The water extract of the fermented product by Bs exhibited strong enzymatic activity for fibrinogen and starch hydrolysis. Based on the observed physicochemical and biological properties, the fermented products of T. molitor by microorgansims can likely be applied as functional materials in various industries.

• Journal of the Semiconductor & Display Technology
• /
• v.20 no.2
• /
• pp.1-5
• /
• 2021

Ultraviolet (UVA)-emissive BaSiO₃:Ce³⁺ phosphor was astonishingly reproducible by vacuum-sintering at a high temperature through a simple solid-state reaction method. It was conveniently formed in BaSiO₃ phases. The compound showed the UVA emission and the UV-VUV excitation due to 5d-4f transitions from Ce³⁺ ions: emission peak at 380 nm with a 56 nm width. Its temperature dependence and vacuum UV excitability were examined for practical application as an excimer discharge lamp, which showed the high thermal stability (80% at 100℃) and the strong VUV excitations at 145 nm and 172 nm.

• Journal of the Microelectronics and Packaging Society
• /
• v.6 no.3
• /
• pp.37-43
• /
• 1999

Co-firing incompatibility between the low temperature sinterable Glass/ceramic and Ag-thick film was studied. The dielectric material, which has been developed for microwave frequency applications, consists of $SiO_2-TiO_2-Bi_2O_3$-$Bi_2O_3$-RO system(RO:BaO -CaO-SrO) crystallizable glass and $Al_2O_3$as a ceramic filler. The large camber in the sintered specimen and cracks at the Ag-film under the influence of the camber occurred due to the difference of densification rate between the ceramic sheet and the Ag-film $B_2O_3$addition to the Glass/ceramic mixture reduced the severe camber. The cambers decreased with increasing the $B_2O_3$ content, and completely disappeared with 14 vol% $B_2O_3$addition. With additions of $B_2O_3$, $\varepsilon_{r}$ decreased abruptly, Q$\times$f value increased largely and the $\tau_f$ value of the material quickly shifted to positive one.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07b
• /
• pp.738-743
• /
• 2004

The microwave dielectric properties and their related structural characteristics in solid solutions of (1-x) $Ba(Mg_{1/3}Nb_{2/3})O_3$ -x $La(Mg_{2/3}Nb_{1/3})O_3$ (BLMN) have been investigated by measuring the dielectric constant${\varepsilon}r)$, Q value and temperature coefficient of resonant frequency$({\tau}f)$ and by observing the crystal structure using high resolution transmission electron microscopy (HRTEM). Microwave dielectric properties showed characteristic features for specific composition. Dielectric constant$({\varepsilon}r)$ showed maximum value at the composition which corresponds to the phase boundary between 1:2 ordered and 1:1 ordered structure. The increase in ${\varepsilon}_r$ may be caused by the rattling of ions by incorporating smaller ions and the disordered structure. The variation of temperature coefficient of resonant frequency${{\tau}_f)$ was investigated in terms of oxygen octahedra tilting.

• Journal of the Korean Ceramic Society
• /
• v.36 no.12
• /
• pp.1350-1355
• /
• 1999

Sintering characteristics and dielectric properties of low temperature sinterable Glass/Ceramic dielectric materials were investigated. The dielectric materials which were developed for microwave frequency applications consist of SiO2-TiO2-Bi2O3-RO system(RO:BaO-CaO-SrO) crystallizable glass and Al2O3 as a ceramic filler. Sintering experiments showed that no more densification occurred above 80$0^{\circ}C$ and bulk density and shrinkage depended on Al2O3 content only. Results of dielectric measurements showed that $\varepsilon$r Q$\times$f and $\tau$f of the material containing 30wt% Al2O3 were 17.3, 600 and +23 ppm respectively. Those values for 45 and 60wt% Al2O3 samples were 11.6, 1400, +0.7 ppm and 7.2, 2000, -8.5 ppm, repectively. The results clearly showed that the Glas/Ceramic materials of present experiment decreased in $\varepsilon$r and increased in $\times$f value and changed from positive to negative value in $\tau$f value with the increasement of Al2O3 content.

• Korean Journal of Materials Research
• /
• v.4 no.4
• /
• pp.453-458
• /
• 1994

$(Ba_{0.5}Sr_{0.5)/TiO_3$(BST) thin films were prepared for the application of 256 Mb DRAM by RF magnetron sputtering. The crystallinity of BST thin films increased with increasing deposition tempera lure. The composition of thin films was $(Ba_{0.48}Sr_{0.48)/TiO_{2.93}$ Pt/Ti barrier layer suppressed the diffusion of Si into BST layer. The films showed a dielectric constant of 320 and a dissipation factor of 0.022 at 100 kHz. the change of capacitance of the films with applied voltage was small, showing paraelectric property. The charge storage density and leakage current density were 40fC/$\mu \textrm{m}^{2}$ and 0.8$\mu A/\textrm{cm}^2$, respectively at a field of 0.15 MV/cm. The BST films obtained by RF magnetron sputtering appeared to be potential thin film capacitors for 256 Mb DRAM application.

• Journal of the Korean Ceramic Society
• /
• v.27 no.3
• /
• pp.430-436
• /
• 1990

Glasses of different compositions were synthesized by substituting each component of 56ZrF4-14BaF2-6LaF3-4AlF3-20NaF(ZBLAN) with HfH4, SrF2, GdF3, InF3 and LiF3, each of similar size and chemical property with the component being substituted, respectively. The heating rate used in the DSC runs was 10K/min. All ofthe glasses exhibit glass transition temperatures of 510$\pm$10K, while crystallization temperatures vary between 625 and 720K depending upon different glass compositions. For most glasses crystallization temperatures obtained while cooled are lower than those obtained while heated, but InF3 or SrF2 containing glasses showed opposite trend. HBLAN, ZHBLAN and ZHBLANLi glasses, which were made by substituting HfH4, LiF for ZrF4 and NaF of ZBLAN respectively, showed improvement in the glass stability.

• Transactions on Electrical and Electronic Materials
• /
• v.6 no.3
• /
• pp.101-105
• /
• 2005

Electroluminescence(EL) and current-voltage(I-V) characteristics of hybrid EL devices containing Pr and Mn co-doped ZnS nanoparticles were investigated in this study. For the insertion of a hole transport layer of poly (N-vinyl carbazole)(PVK), the current level became lower due to the accumulation of electrons at the interface between PVK and nanoparticles. When both PVK and buffer layer $BaF_2$ were simultaneously introduced, the enhanced EL efficiency and improved I-V characteristics were obtained. This results from the additional increase of hole injection owing to the internal field induced by the significant accumulation of electrons at the interface. The presence of buffer layer $BaF_2$ together with PVK makes it possible the charge accumulation enough to induce the sufficient internal field for further hole injection.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• v.25 no.5
• /
• pp.413-421
• /
• 2022

Purpose: Perinatal cytomegalovirus (CMV) infection can lead to biliary atresia (BA) in different entities. This study aimed to compare the clinical, hematological, biochemical, and histological features of infants with BA based on their CMV immunoglobulin M (IgM) status at presentation. Methods: This cross-sectional descriptive study was carried out between January 2019 and June 2020 at the Department of Pediatric Gastroenterology and Nutrition at the Bangabandhu Sheikh Mujib Medical University (BSMMU) in Dhaka. Forty-three patients with BA were selected purposively and categorized into either the CMV IgM-positive or CMV IgM-negative BA group. Categorical variables were compared using Fisher's exact test and chi-square tests, while the Student's t-test and Mann-Whitney U-test were used to compare continuous variables. For all statistical tests, a p-value <0.05 was considered statistically significant. Results: Thirty-three (76.7%) of the cases were between 2 and 3 months of age on admission. The clinical, hematological, and biochemical parameters did not differ significantly between the CMV IgM-positive and CMV IgM-negative BA groups. Most (50.0%) of the CMV IgM-positive cases had fibrosis stage F2, while 43.5% of the CMV IgM-negative cases had fibrosis stage F3, with no significant difference between the groups (p=0.391). Conclusion: Our data shows no significant distinction between CMV IgM-positive and CMV IgM-negative BA, suggesting that CMV does not contribute to BA pathogenesis.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1993.05a
• /
• pp.134-136
• /
• 1993

Using the extended H$\ddot{u}$ckel molecular orbital method in connection with the tight binding model, we have studied electronic structure and related properties of superconducting $YBa_2Cu_3O_{7-x}$ crystals in which O-atoms in regular sites were selectively replaced with F atoms. The calculations are based on the crystal structure of Y-Ba-Cu-O obtained by Beno et al.. We use atomic coordinates that refer to the unrelaxed Y-Ba-Cu-O system. In analogy to the isomerism problem with molecules, we discuss all possible combinations of F-substitutions in O-sites with one, two, and four F atoms. The calculations are carried out within charged clusters model for the analogues of the YBa-free copperoxide. Our results suggest that the electronic structure of the symmetrically F-substituted or F-added compound is closer to that of the oxygen-deficient superconducting compound than that obtained from unsymmetrical substitution. This applies in particular if O is replaced with in an O(1) site. This suggests that superconductivity is very sensitive to the oxygen content of the $CuO_2$ layers.