• Title/Summary/Keyword: BTX

Search Result 116, Processing Time 0.031 seconds

Effect of Surfactant on Solvent Extraction for Light Hydrocarbon from Soils (토양중 Light Hydrocarbon의 용매추출에 미치는 계면활성제의 영향)

  • Hwang, Keon-Joong;Atalay, Asmare
    • Journal of Environmental Health Sciences
    • /
    • v.24 no.2
    • /
    • pp.74-79
    • /
    • 1998
  • This study was conducted to evaluate the surfactant solutions which influence solvent extraction from light hydrocarbon contaminated soils. Nine characteristic compounds were studied: benzene, toluene, ethylbenzene, o-xylene, mxylene, p-xylene, n-propylbenzene, 1,2,4-trimethylbenzene, and n-butylbenzene which were found in gasoline. Adsee-799 and Witbreak DRA-22 showed some extractive capacity for light hydrocarbons from soil. There was no added advantage obtained by using other surfactants in this study. No removal of contaminants from soil was observed when the surfactant concentration was 0.5 percent or below. When the surfactant concentration was 4 percent, the average recovery for some hydrocarbons was 10.8 percent, which was the best obtained at these levels. There was 10 percent surfactant contribution for methanol extraction from soil with the Witbreak DPG-482 and Witbreak DRA-22. This study provided a useful screening technique for procedures that can be used to remediate soils contaminated with light hydrocarbons.

  • PDF

Development of Source Profiles and Estimation of Source Contribution for VOCs by the Chemical Mass Balance Model in the Yeosu Petrochemical Industrial Complex (여수석유화학산단 내 VOCs에 대한 오염원 분류표의 개발 및 CMB 모델에 의한 기여도 산정)

  • Jeon Jun-Min;Hur Dong;Kim Dong-Sul
    • Journal of Korean Society for Atmospheric Environment
    • /
    • v.21 no.1
    • /
    • pp.83-96
    • /
    • 2005
  • The purposes of this study were to characterize the local levels of VOCs (volatile organic compounds), to develop source profiles of VOCs, and to quantify the source contribution of VOCs using the CMB (chemical mass balance) model. The concentration of VOCs had been measured every 6-day duration in the SRO monitoring site in the Yeosu Petrochemical Industrial Complex from September 2000 to August 2002. The total of 35 target VOCs, which were included in the TO-14 designated from the U.S. EPA, was selected to be monitored in the study area. During a 24-h period, the ambient VOCs were sampled by using canisters placing about 10 ~ 15 m above the ground level. The collected canisters were then analyzed by a GC-MS in the laboratory. Aside from ambient sampling at the SRO site, the VOCs had been intensively and massively measured from 8 direct sources and 4 general sources in the study area. The results obtained in the study were as follows; first, the annual mean concentrations of the target VOCs were widely distributed regardless of monitoring sites in the Yeosu Petrochemical Industrial Complex. In particular, the concentrations of BTX (Benzene, Toluene, Xylene), vinyl chloride were higher than other target compounds. Second, based on these source sample data, source profiles for VOCs were developed to apply a receptor model, the CMB model. Third, the results of source apportionment study for the VOCs in the SRO Site were as follows; The source of petrochemical plant was apportioned by 31.3% in terms of VOCs mass. The site was also affected by 16.7% from wastewater treatment plant, 14.0% from iron mills, 8.4% from refineries, 4.4% from oil storage, 3.8% from automobiles, 2.3% from fertilizer, 2.3% from painting, 2.2% from waste incinerator, 0.6% from graphic art, and 0.4% from gasoline vapor sources.

Treatment of non-odontogenic orofacial pain using botulinum toxin-A: a retrospective case series study

  • Kim, Sang-Yun;Kim, Young-Kyun;Yun, Pil-Young;Bae, Ji-Hyun
    • Maxillofacial Plastic and Reconstructive Surgery
    • /
    • v.40
    • /
    • pp.21.1-21.5
    • /
    • 2018
  • Background: The purpose of this study was to evaluate the clinical outcomes of treatment of non-odontogenic atypical orofacial pain using botulinum toxin-A. Methods: This study involved seven patients (seven females, mean age 65.1 years) who had non-odontogenic orofacial pain (neuropathic pain and atypical orofacial pain) and visited the Seoul National University Bundang Hospital between 2015 and 2017. All medication therapies were preceded by botulinum toxin-A injections, followed by injections in the insignificant effects of medication therapies. Five of the seven patients received intraoral injections in the gingival vestibule or mucosa, while the remaining two received extraoral injections in the masseter and temporal muscle areas. Results: In five of the seven patients, pain after botulinum toxin-A injection was significantly reduced. Most of the patients who underwent surgery for dental implantation or facial nerve reconstruction recovered after injections. However, the pain did not disappear in two patients who reported experiencing persistent pain without any cause. Conclusions: The use of botulinum toxin-A for the treatment of non-odontogenic neuropathic orofacial pain is clinically useful. It is more effective to administer botulinum toxin-A in combination with other medications and physical therapy to improve pain.

Emission Characteristics of VOCs in Drying Process for Plywood Manufacturing (합판 제조용 목재 건조공정에서의 휘발성 유기화합물(VOCs) 배출특성)

  • Jang, Jeong-Gook;Kim, Mi-Ran
    • Journal of Environmental Science International
    • /
    • v.17 no.12
    • /
    • pp.1381-1390
    • /
    • 2008
  • Emission characteristics of volatile organic compounds (VOCs) were investigated in the flue gas emitted from wood drying process for plywood manufacturing. The moisture content of raw timber was average 48%, and its density was $831.55kg/m^3$. But the moisture content of dried wood is needed less than around 10%, thus the moisture contents of flue gas should be remarkably high(about 18.2 V/V%). Therefore, the vapor in flue gas is equivalent to 320 ton-vapor/day when 1100 ton-wood/day is treated in the wood drying process. The temperature of flue gas ranges from $140^{\circ}C\;to\;150^{\circ}C$ in each dryer stack with exception of the input site of wood(about $110^{\circ}C$). The velocity of flue gas in each stack ranges from 1.7 to 9.7m/sec. In order to assess the concentrations and attribution rate of odorous compounds, it was analyzed about 40 VOCs in the flue gases. It was found that the major odorous compounds were 8 compounds, and the concentrations of major VOCs(ppm) were as follows; benzene: $0.054{\sim}0.052$, toluene: $1.011{\sim}2.547$, ethylbenzene: $0.472{\sim}2.023$, m,p-xylene: $0.504{\sim}3.245$, styrene: $0.015{\sim}0.148$, o-xylene : $0.271{\sim}1.097$, ethanol: $11.2{\sim}32.5$, ${\alpha}$-pinene: $0.908{\sim}10.578$, ${\beta}$-pinene: $0.982{\sim}14.278$. The attribution rate of terpenes (${\alpha}$-pinene, ${\beta}$-pinene) was about 60.56%, and that of aromatics and alcohols was about 22.77%, and 16.67%, respectively. It is suggested that the adequate control device should be used to control both the water soluble and non-soluble compounds because both compounds were mixed in flue gas.

Biodegradation of Phenol by Comamonas testosteroni DWB-1-8 Isolated from the Activated Sludge of Textile Wastewater (섬유 폐수 활성 슬러지에서 분리한 Comamonas testosteroni의 생물학적 페놀 분해)

  • Kwon, Hae Jun;Choi, Doo Ho;Kim, Mi Gyeong;Kim, Dong-Hyun;Kim, Young Guk;Yoon, Hyeokjun;Kim, Jong-Guk
    • Journal of Life Science
    • /
    • v.30 no.2
    • /
    • pp.156-161
    • /
    • 2020
  • Since industrialization, the production and utilization of various chemicals has contributed to improving the quality of our lives, but the subsequent discharge of massive waste is inevitable, and environmental pollution is becoming more serious every day. Exposure to chemicals as a result of environmental pollution is having a negative effect on human health and the ecosystem, and cleaning up the polluted environment that can affect our lives is a very important issue. Toxic aromatic compounds have been detected frequently in soil, groundwater, and wastewater because of the extensive use of oil products, and phenol, which is used to produce synthetic resins, textiles, and dyes, is one of the major pollutants, along with insecticides and preservatives. Phenol can cause dyspnea, headache, vomiting, mutation, and carcinogenesis. Phenol-degrading bacterium DWB-1-8 was isolated from the activated sludge of textile wastewater; this strain was identified as Comamonas testosteroni by 16S rRNA gene sequencing. The optimal culture conditions for the cell growth and degradation of phenol were 0.7% K2HPO4, 0.6% NaH2PO4, 0.1% NH4NO3, 0.015% MgSO4·7H2O, 0.001% FeSO4·7H2O, an initial pH of 7, and a temperature of 30℃. The strain was also able to grow by using other toxic compounds, such as benzene, toluene, or xylene (BTX), as the sole source of carbon.

A Comparison on the Characteristics of Benzene Exposure between the Coal chemical and Petrochemical refining method during Turnaround (석유 및 석탄화학의 대보수작업중 벤젠노출 특성 비교)

  • Chung, Eun-Kyo;Yu, Gye-Muk;Shin, Jung-Ah;Kwon, Ji-Woon;Park, Hyun-Hee;Chung, Kwang-Jae;Lee, Jong-Han;Lee, In-Seop;Kang, Seong-Kyu;Ryu, Hyang-Woo;Kim, Young-Sun;Lee, Byung-Kyu;Jang, Jae-Kil;Kim, Won;Kim, Jung-Man
    • Journal of Korean Society of Occupational and Environmental Hygiene
    • /
    • v.20 no.3
    • /
    • pp.147-155
    • /
    • 2010
  • This study was conducted to investigate the benzene exposure levels in coal chemical and petrochemical refining industries during BTX turnaround (TA) processes where benzene was being produced. Three companies producing benzene were selected, one coal chemical and two petrochemical industries. TA processes were classified into three stages: shut down, maintenance, and start up. Data was analyzed by classifying the refining method into 2 groups (Petrochemistry, Coal chemistry) for 823 workers. Comparing the data from petrochemical industries with data from a coal chemical refining industry, while benzene concentration levels of long-term samples during TA were not statistically different (p> 0.05), those levels of short-term samples were significantly different (p< 0.001). About 4.79 % of data in petrochemical industries exceed the occupational exposure limits (OELs) of benzene, 1 ppm. In a coal refining methods, about 15.7% exceeded the benzene OELs. The benzene concentrations in maintenance and start up stage of TA for petrochemical refineries were higher than those in a coal chemical refinery (p <0.01). These findings suggest that the coal chemical refining site requires more stringent work practice controls compare to petrochemical refining sites during TA processes. Personal protective equipments including organic respirators should be used by TA workers to protect them from benzene overexposure.

Redox Characteristic and Evolution of a Fragipan of Gangreung Series Commonly Developed in Coastal Terraces (해성단구지에서 발달된 강릉통의 이쇄경반층(Btx) 토양의 산화.환원적 특성에 관한 연구)

  • Zhang, Yong-Seon;Moon, Yong-Hee;Sonn, Yeon-Kyu;Hyun, Byung-Keun;Park, Chan-Won;Yoon, Sung-Won
    • Economic and Environmental Geology
    • /
    • v.45 no.2
    • /
    • pp.137-144
    • /
    • 2012
  • Soil pan typically presents the problems in soil water movement or in aeration which is not appropriate for a plant root growth, In this study physico-chemical characteristics of soils and micromorphological characteristic of clay accumulated zone were investigated to identify redox characteristic and evolution of a fragipan of Gangreung series commonly developed in coastal terraces. Gangreung series is classified as Aquic Fragiudalfs according to the USDA soil taxonomy. It is known that sedimentary ocean floor results in soil pan having parallel liner soil structure due to landscape evolution around 200 to 250 million years ago. it is considered that illite, kaolinite, and vermiculite are major clay minerals contained in a fragipan of Gangreung series. Mixed gray and reddish brown colored band around soil pores was found and would be the redoxmorphic features of fragipan. It is possibly due to accumulated illuvial clay and ferriargillans in soil pores and aggregates in reducing conditions eluding ferrous material. Therefore, mixed colored band around pores in soils of Gangreung series would be developed from the eluted ferrous materials which were accumulated in fragipan during the emerged land formation.

Screening the level of cyanogenic glucosides (dhurrin) in sorghum accessions using HPLC analysis

  • Choi, Sang Chul;Chung, Yong Suk;Lee, Yun Gyeong;Park, Yun Ji;Kim, Changsoo
    • Proceedings of the Korean Society of Crop Science Conference
    • /
    • 2017.06a
    • /
    • pp.104-104
    • /
    • 2017
  • Sorghum (Sorghum bicolor (L.) Moench.) is one of the most important crops for human and animal nutrition. Nonetheless, sorghum has a cyanogenic glucoside compound which can be degraded into hydrogen cyanide, toxic to humans and animals even with tiny amount. In consequence, breeding materials with a low cyanide level has been a top priority in sorghum breeding programs. To fulfill our long-term goal, we are screening sorghum accessions with low cyanide level, which would be an important breeding material for food safety. We collected seeds of various sorghum accessions and analyzed relevant metabolites to find useful breeding materials of sorghum accessions containing low cyanide. Fourteen wild relatives were obtained from the University of Georgia in US, a reference accession BTx623, and three local varieties from National Agrobiodiversity Center of Rural Development Administration in Korea, and one wild species from the Wild Plant Resources Seed Bank of Korea University in Korea. Sorghum plants were grown in plastic greenhouse under natural conditions. After growing, leaf samples were harvested at different developmental stages: seedling phase, vegetative phase (right before flowering), and reproductive phase (ripening). Using collected samples, quantification analysis were performed by an HPLC system for three metabolites (dhurrin, 4-hydroxybenzaldehyde, and 4-hydroxyphenylacetic acid) in sorghum plants. Prior to metabolome analysis, specific experimental condition for HPLC system was set to be able to separate three metabolites simultaneously. Under this condition, these metabolites were quantified in each accession by HPLC system. We observed that the metabolite contents were changed differently by developmental stages and accessions. We clustered these results into five groups as patterns of their contents by developmental stages. Most of accessions showed that 4-hydroxybenzaldehyde content was very high at seedling stage and decreased rapidly at vegetative phase. Interestingly, the patterns of dhurrin content were very different among clusters. However, 4-hydroxyphenylacetic acid content was maintained at low levels by developmental stages in most accessions. The results would demonstrate how dhurrin and alternative degradation pathways are differentiated in each accession.

  • PDF

Antioxidant Favors the Developmental Competence of Porcine Parthenogenotes by Reducing Reactive Oxygen Species

  • Hossein, Mohammad Shamim;Kim, Yeun Wook;Park, Seon Mi;Koo, Ok Jae;Hashem, Md Abul;Bhandari, Dilip P;Jeong, Yeon Woo;Kim, Sue;Kim, Ji Hye;Lee, Eu Gine;Park, Sun Woo;Kang, Sung Keun;Lee, Byeong Chun;Hwang, Woo Suk
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.20 no.3
    • /
    • pp.334-339
    • /
    • 2007
  • Reactive oxygen species (ROS) generate during electrical activation of oocytes which has detrimental effects on embryo survival when overwhelmed. The present study was designed to investigate the ability of L-ascorbic acid, a novel water soluble antioxidant, to reduce the ROS level in developing embryos and their subsequent effects on embryo development in vitro. The compact cumulus oocyte complexes (COCs) were cultured in tissue culture medium (TCM)-199 supplemented with 10 ng/ml epidermal growth factor, 4 IU/ml pregnant mare serum gonadotropin (PMSG), and human chorionic gonadotropin (hCG) and 10% (v/v) porcine follicular fluid (pFF) for 44 h. After maturation culture, the denuded oocytes were activated with a single DC pulse of 2.0 kV/cm in 0.3 M mannitol solution containing 0.5 mM of HEPES, 0.1 mM of $CaCl_2$ and 0.1 mM of $MgCl_2$ for $30{\mu}s$ using a BTX Electro-cell Manipulator. The activated oocytes were cultured in modified North Carolina State University-23 (mNSCU-23) medium for 168 h. The level of $H_2O_2$ in each embryo was measured by the dichlorohydrofluorescein diacetate (DCHFDA) method at 48 h after activation. The blastocyst formation rate was significantly higher when culture medium was supplemented with 50 and $100{\mu}M$ L-ascorbic acid (31.2 and 38.7%, respectively) compared to non-supplemented (16.1%) group. Accordingly, significantly more cells in blastocyst were found for 50 and $100{\mu}M$ L-ascorbic acid (50.0 and 56.4, respectively) compared to 0 and $200{\mu}M$ L-ascorbic acid (36.5 and 39.8, respectively). L-ascorbic acid reduces the $H_2O_2$ level in developing embryos in a dose-dependant manner. The $H_2O_2$ level (pixels/ embryos) was 191.5, 141.0, 124.0 and 163.3 for 0, 50, 100 and $200{\mu}M$ L-ascorbic acid, respectively. So, we recommend to supplement 50 or $100{\mu}M$ L-ascorbic acid in porcine in vitro culture medium.

Study of Operation Condition of Biofilter Using Fibril-form Matrix for Odor Gas Removal (악취가스 제거를 위안 섬유상 담체를 적용한 바이오필터 운전조건에 관한 연구)

  • Jeong Gwi-Taek;Lee Gwang-Yeon;Byun Ki-Young;Lee Kyoung-Min;Sunwoo Chang-Shin;Lee Woo-Tae;Park Chan-Young;Kim Do-Hyeong;Cha Jin-Myoung;Jang Young-Seon;Park Don-Hee
    • KSBB Journal
    • /
    • v.20 no.5 s.94
    • /
    • pp.341-344
    • /
    • 2005
  • This research was performed for developing of biological treatment process of odor gas such as MEK, $H_2S$, and toluene, which was generated from the food waste recycling process. To establish the operational conditions of odor gas removal by small-scale biofiltration equipment, it was continuously operated by using toluene as a treating odor object. When the odor treating microorganisms were adhered to fibril form biofilter, high removal efficiency over $93\%$ was obtained by biofilm formation. At 400 ppm of inlet odor gas concentration and 10 sec of retention time, the removal efficiency was $76\%$ and $93\%$ in 1 st stage reactor and End stage reactor, respectively. However, the removal efficiency remained over $97\%$ at the operational conditions above 15 sec of retention time.