• The Journal of the Acoustical Society of Korea
• /
• v.8 no.4
• /
• pp.65-73
• /
• 1989

In this paper, we propose a text-independent speaker identification algorithm based on VQ(vector quantization) and vowel classification, and its performance is studied and compared with that of a conventional speaker identification algorithm using VQ. The proposed speaker identification algorithm is composed of three processes: vowel segmentation, vowel recognition and average distortion calculation. The vowel segmentation is performed automatlcally using RMS energy, BTR(Back-to-Total cavity volume Ratio)and SFBR(Signed Front-to-Back maximum area Ratio) extracted from input speech signal. If the Input speech signal Is noisy, particularity when the SNR is around 20dB, the proposed speaker identification algorithm performs better than the reference speaker identification algorithm when the correct vowel segmentation is done. The same result is obtained when we use the noisy telephone speech signal as an input, too.

• Review of KIISC
• /
• v.29 no.6
• /
• pp.13-22
• /
• 2019

기존의 NTFS, HFS+, Ext4와 같은 전통적인 파일시스템들은 디스크 사용, 공간 관리, 데이터 암호화 등 여러 측면에서 한계점을 가지고 있었다. 특히 디스크 사용 측면에서 기본적으로 단일 디스크 안에서 동작하도록 설계되었기 때문에 여러 개의 디스크에서 동작하도록 하려면 RAID와 같은 별도의 구성이 필요했다. 이에 따라 주요 운영체제들은 위와 같은 기존 파일시스템들의 한계점들을 극복하도록 설계된 Pooled Storage 파일시스템들을 공개하였다. Pooled Storage 파일시스템에 관한 연구는 2017년 여름 미국 오스틴에서 열린 DFRWS 학회에서 독일의 Jan-Niclas Hilgert에 의해 발표된 이후 디지털 포렌식 학계 및 산업계에서 집중적인 연구개발이 진행되고 있다. 2017년 Hilgert는 ZFS 파일시스템에 대한 분석기능을 공개소프트웨어인 SleuthKit에 추가한 기술을 발표하였고, 2018년 DFRWS에서는 BtrFS 파일시스템에 대한 분석기능을 공개하였다. BlackBag Technologies의 Joe Syle은 APFS 파일시스템에 대한 분석기능을 SleuthKit에 추가한 결과를 DFRWS 2018에서 발표하였다. 노르웨이의 Rune Nordvik은 2019년 DFRWS에서 REFS를 역공학을 통하여 분석한 결과를 공개하였다. 국내에서는 고려대학교를 중심으로 ReFS에 대한 연구가 진행 중이다. 본 논문에서는 주요 운영체제들이 공개한 Pooled Storage 파일시스템 형태의 차세대 파일시스템인 ReFS, APFS, BtrFS를 소개하고 각 파일시스템의 특징과 주요 기능들을 설명한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10a
• /
• pp.268-272
• /
• 1988

In this paper, we introduce the supermicro computer- based nonreal-time BTR type DNC system, which can provide valuable datas for production and management by monitoring the operation of NC equipments. (upto 48 NC machine) In accordance with manual job schedulinq, part program is combined with tool presetting datas and enables rapid downloading and uploading. An application to the production system of die & Mold plant is presented.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.237-241
• /
• 1987

In this paper, the BTR (Behind the Tape Reader) type communication unit which interfaces the IEBM PC/XT to the FANUC 5M NC controller is developed, making it possible to send NC part program from the memory of IBM PC/XT to the NC controller. As an example of integration of CAD and CAM technologies, the machining of a two dimensional hand-written free line which incorporates the processes of geometric data acquisition using a digitizing tablet, automatic part programming and control of NC milling machine operation is demonstrated.

• Journal of Welding and Joining
• /
• v.19 no.6
• /
• pp.614-621
• /
• 2001

A study was carried out to determine the solidification cracking susceptibility of Ni-base superalloy as a function of Fe content in base metal. Three kinds of Ni-base superalloys with three different levels of Fe content were used. The solidification cracking susceptibility was evaluated by the Trans-Varestraint test at four different strain levels. Quantitative analysis of crack revealed that the solidification crack length and the temperature range in which hot cracking occurred in fusion zone (Brittle Temperature Range, BTR) decreased with a decrease in Fe content. Further, the thermo-calc data indicated that the solidification temperature range also decreased with decreasing Fe content. From these results, it was deduced that the improvement of the solidification cracking susceptibility with decreasing Fe content was attributed to the decrease of the solidification temperature range.

• The Korean Journal of Mycology
• /
• v.36 no.2
• /
• pp.138-143
• /
• 2008

Botrytis cinerea, gray mold pathogen, causes serious losses in greenhouse tomato crop. In this study, a primer set was developed for identification and specific PCR detection of B. cinerea from tomato plants. The primer pair (BTF1/BTR1) was designed from polymorphic sequence region in pyruvate carboxylase gene (pyc) of B. cinerea. A PCR product (112 bp) was amplified on genomic DNA of 13 B. cinerea isolates from 10 different host plants, but not on those from 6 other Botrytis spp., 4 Botryotinia spp., 5 Sclerotinia spp. and 16 other genus of phytopathogenic fungi. The sensitivity limit of the primer set was 2 pg of genomic DNA of B. cinerea, approximately. The PCR assay using species-specific primer set was specifically able to detect the pathogen on naturally infected tomato plants and artificially infected plants. These results suggest that the sensitivity and specificity of this primer set can be applied in a rapid and accurate diagnosis of tomato disease caused by B. cinerea.

• Journal of Biomedical Engineering Research
• /
• v.30 no.4
• /
• pp.327-332
• /
• 2009

In this paper, new index was developed to estimate the depth of anesthesia during general anesthesia using EEG. Analysis of the power spectral density(PSD) of EEG was used to develop new parameters because EEG signal tends to have slow wave during anesthesia. Classifier for index creator was developed by using SEF, BDR and BTR parameters, which are calculated by power spectral density. EEG data were obtained from 7 patients (ASA I, II) during general anesthesia with Sevoflurane. The anesthetic depth evaluation indexes ranged from 0 to 100. The average were $86.05{\pm}10.1$, $36.98{\pm}20.2$, $15.33{\pm}13.6$, $50.87{\pm}16.5$ and $87.72{\pm}11.7$ for the states of pre-operation, induction of anesthesia, operation, awaked and post-operation, respectively. The results show that while the depth of anesthesia was evaluated, more accurate information can be provided for anesthetician.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.4
• /
• pp.805-815
• /
• 1994

The development of automatic production systems has a trend toward Computer Integrated Manufacturing System(CIMS) in recent years. In hardware configuration, CIMS are composed of intelligent CAD/CAM work stations, multifunction CNC machining centers including material handling systems. The DNC systems present the key element of automation hierarchy in a FMS. A DNC system is one which connects a number of numerically-controlled machines to a common memory in a digital computer for part program storage with provision for on-demand distribution of part program data to machines using communication in hierarchical structure of central computer, control computer and cell controller. This paper describes the development of Behind-the-Tape-Reader(BTR) type DNC system using CYBER 180-830 as a central computer and IBM PC-386 cell control computer and NC lathe with FANUC 5T NC controller. In this system, the connection between central computer and cell control computer is done via RS-232C serial interface board, and the connection between cell control computer and FANUC 5T controller is done via parallel interface board. The software consists of two module, central computer communication module for NC program downloading and status uploading, NC machine running module for NC operating.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.3
• /
• pp.727-730
• /
• 2023

The operation of electric automatic windows is used in harsh environments, and the energy density decreases as charging and discharging are repeated, and as soundness deteriorates due to damage to the internal separator, the vehicle's mileage decreases and the charging speed slows down, so about 5 to 10 Batteries that have been used for about a year are classified as waste batteries, and for this reason, as the risk of battery fire and explosion increases, it is essential to diagnose batteries and estimate SOH. Estimation of current battery SOH is a very important content, and it evaluates the state of the battery by measuring the time, temperature, and voltage required while repeatedly charging and discharging the battery. There are disadvantages. In this paper, measurement of discharge capacity (C-rate) using a waste battery of a Tesla car in order to predict SOH estimation of a lithium-ion battery. A Support Vector Machine (SVM), one of the machine models, was applied using the data measured from the waste battery.

• Asian-Australasian Journal of Animal Sciences
• /
• v.20 no.5
• /
• pp.627-632
• /
• 2007

FoxO1, FoxO3a and FoxO4 belong to the FoxO gene family, which play important roles in the PI3K/PKB pathway. In this study, we cloned the porcine FoxO1, FoxO3a and FoxO4 sequences and assigned them to SSC11p11-15, SSC1p13 and SSC xq13 using somatic cell hybrid panel (SCHP) and radiation hybrid panel (IMpRH). RT-PCR results showed that these three genes are expressed in multiple tissues. Sequencing of PCR products from different breeds identified a synonymous T/C polymorphism in exon 2 of FoxO3a. This FoxO3a single nucleotide polymorphism (SNP) can be detected by AvaII restriction enzyme. The allele frequencies of this SNP were investigated in Dahuabai, Meishan, Tongcheng, Yushan, Large White, and Duroc pigs. Association of the genotypes with growth and carcass traits showed that different genotypes of FoxO3a were associated with carcass length and backfat thickness between 6th and 7th ribs (BTR) and drip loss (p<0.05).