• 대한화장품학회지
• /
• 제45권4호
• /
• pp.409-414
• /
• 2019

실리카와 폴리메틸실세스퀴옥세인(polymethylsilsesquioxane, PMSQ)은 화장품 원료로 널리 쓰이는 실리콘 분체이다. 본 연구팀은 각각 실리카와 PMSQ의 전구체로서 테트라에톡시실란(tetraethyoxysilane, TEOS)과 메틸트라이메톡시실란(methyltrimethoxysilane, MTMS)을 사용하여 졸-겔 법(sol-gel method)을 통해 실리카-PMSQ 복합분체를 합성하였다. 또한, 합성에 사용된 실란 단량체인 TEOS와 MTMS의 단순한 비율 조절만으로 복합분체의 형태 제어에 성공하였다. 실리카-PMSQ 복합분체는 구형, 라즈베리형, 도넛형, 총 3가지 형태를 띠었고, 공통적으로 사용감이 부드럽고 수분산에 용이하며 소프트 포커스 효과를 나타내었다. 복합분체의 형태에 따라서 사용감과 밀착력, 소프트 포커스 효과의 강도에 차이가 있었다. 라즈베리형 복합분체는 가장 강한 소프트 포커스 효과를 보였고, 도넛형 복합분체는 가장 강한 밀착력을 보였으며, 구형 복합분체는 가장 부드러운 사용감을 보였다. 본 연구 결과를 바탕으로, 실리카-PMSQ 복합분체를 원하는 형태로 간편하게 합성할 수 있을 것이다. 더 나아가, 목적에 맞는 복합분체를 선택하여 화장품에 적용할 수 있을 것이다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국내학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.407-413
• /
• 1988

The architecture of a multiprocessor based programmable controller(MBPC) is presented. It consists of a host processor, processing elements, and Input/Output processors. Some problems in implementing such architecture are also described. To resolve them, we proposed and presented INFOBUS, a system bus for MBPC. The performances of INFOBUS and MBPC are analysed using both analytic models and simulations. Some results from the analysis will be given and validated. In case of 50% of BTI(Block Type Instruction) and 4 processors, the scanning time is shown to be 0.194msec/Kstep with some reasonable assumptions.

• 한국잠사학회:학술대회논문집
• /
• 한국잠사학회 2002년도 Join Meetings of Korean Society of Sericultural Science and Japanse Society of Sericultural Science
• /
• pp.65-65
• /
• 2002

No Abstract, See Full Text

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제36권6호
• /
• pp.520-527
• /
• 2010

Introduction: This study examined the treatment patterns of temporomandibular disorders (TMD) including conservative and surgical procedures. Materials and Methods: Patients with TMD who visited Gangnam Severance Hospital from June 2007 to May 2008 were enrolled in this study. All patients were examined from the orthopantomogram, temporomandibular joint (TMJ) tomography, and a clinical examination. The patients who required a further evaluation were examined by magnetic resonance imaging and/or computed tomography. The treatment patterns were divided into counseling, medication, splint therapy, botulinum toxin injection (BTI) and surgical treatment. Results: Among the 2,464 patients, the average age was 31.8 years (ranging from 6 to 93); 764 (31.0%) were male and 1,700 (69.0%) were female. 2,355 (95.6%) patients were treated with conservative therapy; 1,460 (62.0%) patients were treated with medication, 931 (39.5%) patients were treated with splint, and 46 (2.0%) were treated with BTI. There were 109 (4.4%) patients treated surgically. Eight (0.3%) patients were treated with total temporomandibular joint replacement surgery. Conclusion: Almost all patients with TMD were treated using conservative methods. Those patients who received surgical treatment because of an ineffective response to conservative treatment had definite problems with the internal derangement and/or osteoarthritis or had severe clinical symptoms.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 16-17 Oct. 1987
• /
• pp.413-418
• /
• 1987

The software developed for the large scale Programmable Controller consists of the programmer's S/W, the Controller's S/W the RBC's (Remote Base Controller's) S/W and the Analog's S/W. The programmer's S/W, running on the Programmer, includes the editor, the compiler, the communication program, and some other programs for easy use. The Controller S/W, which requires the fast scanning time, consists of the BTI( Block Type Instruction) solving program, the timer service routine, the i/o update program, the communication program and etc. The RBC's S/W includes the communication program, the error recovery program and the i/o processing program. The analog S/W, controlled by the Programmer, includes the PID program. The data communication between the Programmer and the Controller the Controller and the RBC, and the RBC and the Analog are developed.

• 한국분말재료학회지
• /
• 제1권2호
• /
• pp.145-152
• /
• 1994

Atomizing mode and powder characteristics of CuA1Ni base shape memory alloy in rotating disk atomization were investigated in accordance with disk materials and additional elements. Produced powders were classified into two types of spherical and flake shape. In the case of CuAlNiBTi and CuAlNiZr alloy, high yield rate and fine powder were obtained. This tendency was same when we used oxide coated disks. We concluded that this results were steno from the wetting characteristics change between molten metal and disk surface. Especially, due to the reactive properties of Ti and Zr with ceramic disk, the change of atomizing appearance and powder characteristics were noticeable.

• 센서학회지
• /
• 제26권4호
• /
• pp.292-296
• /
• 2017

It has become ever harder to design reliable circuits with each nanometer technology node under normal operation conditions, a transistor device can be affected by various aging effects resulting in performance degradation and eventually design failure. The reliability (aging) effect has traditionally been the area of process engineers. However, in the future, even the smallest of variations can slow down a transistor's switching speed, and an aging device may not perform adequately at a very low voltage. Because of such dilemmas, the transistor aging is emerging as a circuit designer's problem. Therefore, in this paper, the impact of aging effects on the delay and power dissipation of digital circuits by using nanomneter MOSFET power gating structure has been analyzed.. Based on this analyzed aging models, a reliable digital circuits can be designed.

• 제어로봇시스템학회논문지
• /
• 제11권10호
• /
• pp.837-842
• /
• 2005

The computational modeling and simulation of complex biological systems are indispensable for new knowledge extraction from huge experimental data and ever growing vast amount of information in systems biology. Moreover, gathering and sharing of the existing information and newly-generated knowledge can speed up this research process. In this regard, several modeling projects have been undertaken for quantitatively analyzing the biological systems via the internet. They include Virtual Cell, JWS and OBIYagns. We also develop an integrated web-based environment, which facilitate investigation of dynamic behavior of cellular systems.

• Asian-Australasian Journal of Animal Sciences
• /
• 제14권4호
• /
• pp.447-454
• /
• 2001

For determining the relative genetic effects of Duroc (D) and Taoyuan (T) breeds on the economic traits of their hybrids, 72 litters of pigs, from four mating types, namely TT (T♂$\times$T♀), DD (D♂$\times$D♀) and D-T hybrids (TD, T♂$\times$D♀ and DT, D♂$\times$T♀) were used in this study. The various crossbreeding parameters were estimated by comparisons among mating types using linear contrasts of least-square analysis. The results of reproductive traits analysis showed that T breed had contributed superior genetic effects on the total number of piglets at birth (TBN) (p<0.10) and number of live piglets at 21 days (LP21) (p<0.05) to the D-T hybrids. Estimates of maternal genetic effects showed that the T females were superior in TBN (p<0.05), but inferior in average birth weight (ABW) and average litter birth weight (LBW) (p<0.01) to the D females. Direct heterosis effects were significant for LBW, LP21 and LWT21 (p<0.01). Least-squares analysis of other economic traits showed that T breed had relative negative effects on all growth traits, withers height (WH), body type index (BTI), average backfat thickness (ABF), carcass length (LENG), loin eye area (longissimus) (LEARA), and lean percentage (LEAN) of D-T hybrids (p<0.05). Estimates of direct genetic effects showed that the D breed was superior to the T breed in all growth and carcass traits except the average backfat (BF). Estimates of maternal genetic effects showed that average body weight at 180 days (WT180) of progenies from T sows were lighter than from D sows. Progenies from D females had larger and leaner carcass than those from T females. Direct heterosis effects were significant for average daily weight gains from 150 to 180 days ($ADG_{150-180}$) (p<0.05) and for average body weights at 150 (WT150), and 180 days (WT180), average daily weight gains from birth to 150 and 180 days ($ADG_{150}$ and $ADG_{180}$, respectively), WH, body length (BL), ABF, BTI, and LENG (p<0.01). The results showed that D-T hybrids tended to have superior TBN and LP21 than D breed, and to be superior in all growth and most conformation and carcass traits to the T breed.

• 환경생물
• /
• 제38권1호
• /
• pp.189-196
• /
• 2020

모기는 감염병을 매개하는 생물종으로서 인간생활에 불편을 야기하며, 교통 및 운송수단 등의 발달로 인해 새로운 질병 도입 및 질병 매개체의 확산에 대한 우려가 증가하고 있는 실정이다. 환경부 토지피복지도 분류체계와 연계하여 모기가 발생 가능한 서식지 유형을 파악하고, 각각의 서식지 유형 특성에 따라 출현 가능한 모기 종류를 함께 구분하였다. 또한 모기의 생태적 특성을 고려하여, 서식지 유형별로 최적의 방제 방법을 제시하였다. 도심지역은 위생 해충의 발생원이 다양한 서식지가 분포하는 지역으로, 최소 환경 조건만 갖춰진다면 모기가 대량 발생하기 적합한 환경일 것으로 보인다. 발생원이 광범위하기 때문에 유충과 성충 방제를 같이 수행하며, 시민들을 대상으로 방제 교육이나 홍보물을 배부하여 적극적인 방제의식을 함양시키는 것이 효과적일 것으로 판단된다. 농업지역의 경우, 저수지나 늪지, 논 등의 정수역에서 모기 유충의 서식밀도가 높을 것으로 예상되어 천적생물을 이용한 생물학적 방제를 이용하면 개체수를 조절하는 데 유용할 것으로 보인다. 산림지역은 흰줄숲모기(Aedes albopictus)의 주요 서식지로서 무분별한 산림벌채를 최소화하고 인근 거주민을 대상으로 물리적 방제를 실시해야 할 것으로 판단되며, 기타지역은 수생태계를 중심으로 발생 가능한 모기 유충을 방제하기 위해 생물학적 방제와 Bti를 이용한 화학적 방제가 병행되어야 할 것으로 보인다. 본 연구는 서식지를 크게 4가지(도심지역, 농업지역, 산림지역, 기타지역)로 분류하여 모기에게 적합한 서식지를 고찰하였으며, 모기 서식지별로 적합한 방제법을 제시하였다. 모기의 개체수를 보다 효율적으로 조절하고, 하절기 시민들의 불편과 피해를 감소시킬 수 있는 기초자료로 제공할 수 있을 것으로 전망한다.