• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.45 no.4
• /
• pp.409-414
• /
• 2019

Silica and polymethylsilsesquioxane (PMSQ) are silicone powders widely used as cosmetics. We synthesized silica-PMSQ composites via sol-gel method using tetraethoxysilane (TEOS) and methyltrimethoxysilane (MTMS) as precursors of silica and PMSQ, respectively. Shape of the composites was controlled by varying the ratios of TEOS and MTMS, which were used as silane monomers. Silica-PMSQ composites showed three different shapes, which were sphere-shape, raspberry- shape, and donut- shape. All of them had soft touch, easy water dispersion, and soft focus effect in common. However, each shape showed some differences in sense of use, adhesion, and strength of the soft focus effect. Raspberry-shape composite had the strongest soft focus effect, donut-shape one had the strongest adhesion, and sphere-shape one had the best in softness. Thus, it is concluded that by varying the ratios of TEOS and MTMS silica-PMSQ composites could be easily synthesized into different shapes, providing various functions. This method can be applied to manufacture functional cosmetics.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10a
• /
• pp.407-413
• /
• 1988

The architecture of a multiprocessor based programmable controller(MBPC) is presented. It consists of a host processor, processing elements, and Input/Output processors. Some problems in implementing such architecture are also described. To resolve them, we proposed and presented INFOBUS, a system bus for MBPC. The performances of INFOBUS and MBPC are analysed using both analytic models and simulations. Some results from the analysis will be given and validated. In case of 50% of BTI(Block Type Instruction) and 4 processors, the scanning time is shown to be 0.194msec/Kstep with some reasonable assumptions.

• Proceedings of the Korean Society of Sericultural Science Conference
• /
• 2002.10a
• /
• pp.65-65
• /
• 2002

No Abstract, See Full Text

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.36 no.6
• /
• pp.520-527
• /
• 2010

Introduction: This study examined the treatment patterns of temporomandibular disorders (TMD) including conservative and surgical procedures. Materials and Methods: Patients with TMD who visited Gangnam Severance Hospital from June 2007 to May 2008 were enrolled in this study. All patients were examined from the orthopantomogram, temporomandibular joint (TMJ) tomography, and a clinical examination. The patients who required a further evaluation were examined by magnetic resonance imaging and/or computed tomography. The treatment patterns were divided into counseling, medication, splint therapy, botulinum toxin injection (BTI) and surgical treatment. Results: Among the 2,464 patients, the average age was 31.8 years (ranging from 6 to 93); 764 (31.0%) were male and 1,700 (69.0%) were female. 2,355 (95.6%) patients were treated with conservative therapy; 1,460 (62.0%) patients were treated with medication, 931 (39.5%) patients were treated with splint, and 46 (2.0%) were treated with BTI. There were 109 (4.4%) patients treated surgically. Eight (0.3%) patients were treated with total temporomandibular joint replacement surgery. Conclusion: Almost all patients with TMD were treated using conservative methods. Those patients who received surgical treatment because of an ineffective response to conservative treatment had definite problems with the internal derangement and/or osteoarthritis or had severe clinical symptoms.

• 제어로봇시스템학회:학술대회논문집
• /
• 1987.10b
• /
• pp.413-418
• /
• 1987

The software developed for the large scale Programmable Controller consists of the programmer's S/W, the Controller's S/W the RBC's (Remote Base Controller's) S/W and the Analog's S/W. The programmer's S/W, running on the Programmer, includes the editor, the compiler, the communication program, and some other programs for easy use. The Controller S/W, which requires the fast scanning time, consists of the BTI( Block Type Instruction) solving program, the timer service routine, the i/o update program, the communication program and etc. The RBC's S/W includes the communication program, the error recovery program and the i/o processing program. The analog S/W, controlled by the Programmer, includes the PID program. The data communication between the Programmer and the Controller the Controller and the RBC, and the RBC and the Analog are developed.

• Journal of Powder Materials
• /
• v.1 no.2
• /
• pp.145-152
• /
• 1994

Atomizing mode and powder characteristics of CuA1Ni base shape memory alloy in rotating disk atomization were investigated in accordance with disk materials and additional elements. Produced powders were classified into two types of spherical and flake shape. In the case of CuAlNiBTi and CuAlNiZr alloy, high yield rate and fine powder were obtained. This tendency was same when we used oxide coated disks. We concluded that this results were steno from the wetting characteristics change between molten metal and disk surface. Especially, due to the reactive properties of Ti and Zr with ceramic disk, the change of atomizing appearance and powder characteristics were noticeable.

• Journal of Sensor Science and Technology
• /
• v.26 no.4
• /
• pp.292-296
• /
• 2017

It has become ever harder to design reliable circuits with each nanometer technology node under normal operation conditions, a transistor device can be affected by various aging effects resulting in performance degradation and eventually design failure. The reliability (aging) effect has traditionally been the area of process engineers. However, in the future, even the smallest of variations can slow down a transistor's switching speed, and an aging device may not perform adequately at a very low voltage. Because of such dilemmas, the transistor aging is emerging as a circuit designer's problem. Therefore, in this paper, the impact of aging effects on the delay and power dissipation of digital circuits by using nanomneter MOSFET power gating structure has been analyzed.. Based on this analyzed aging models, a reliable digital circuits can be designed.

• Journal of Institute of Control, Robotics and Systems
• /
• v.11 no.10
• /
• pp.837-842
• /
• 2005

The computational modeling and simulation of complex biological systems are indispensable for new knowledge extraction from huge experimental data and ever growing vast amount of information in systems biology. Moreover, gathering and sharing of the existing information and newly-generated knowledge can speed up this research process. In this regard, several modeling projects have been undertaken for quantitatively analyzing the biological systems via the internet. They include Virtual Cell, JWS and OBIYagns. We also develop an integrated web-based environment, which facilitate investigation of dynamic behavior of cellular systems.

• Asian-Australasian Journal of Animal Sciences
• /
• v.14 no.4
• /
• pp.447-454
• /
• 2001

For determining the relative genetic effects of Duroc (D) and Taoyuan (T) breeds on the economic traits of their hybrids, 72 litters of pigs, from four mating types, namely TT (T♂$\times$T♀), DD (D♂$\times$D♀) and D-T hybrids (TD, T♂$\times$D♀ and DT, D♂$\times$T♀) were used in this study. The various crossbreeding parameters were estimated by comparisons among mating types using linear contrasts of least-square analysis. The results of reproductive traits analysis showed that T breed had contributed superior genetic effects on the total number of piglets at birth (TBN) (p<0.10) and number of live piglets at 21 days (LP21) (p<0.05) to the D-T hybrids. Estimates of maternal genetic effects showed that the T females were superior in TBN (p<0.05), but inferior in average birth weight (ABW) and average litter birth weight (LBW) (p<0.01) to the D females. Direct heterosis effects were significant for LBW, LP21 and LWT21 (p<0.01). Least-squares analysis of other economic traits showed that T breed had relative negative effects on all growth traits, withers height (WH), body type index (BTI), average backfat thickness (ABF), carcass length (LENG), loin eye area (longissimus) (LEARA), and lean percentage (LEAN) of D-T hybrids (p<0.05). Estimates of direct genetic effects showed that the D breed was superior to the T breed in all growth and carcass traits except the average backfat (BF). Estimates of maternal genetic effects showed that average body weight at 180 days (WT180) of progenies from T sows were lighter than from D sows. Progenies from D females had larger and leaner carcass than those from T females. Direct heterosis effects were significant for average daily weight gains from 150 to 180 days ($ADG_{150-180}$) (p<0.05) and for average body weights at 150 (WT150), and 180 days (WT180), average daily weight gains from birth to 150 and 180 days ($ADG_{150}$ and $ADG_{180}$, respectively), WH, body length (BL), ABF, BTI, and LENG (p<0.01). The results showed that D-T hybrids tended to have superior TBN and LP21 than D breed, and to be superior in all growth and most conformation and carcass traits to the T breed.

• Korean Journal of Environmental Biology
• /
• v.38 no.1
• /
• pp.189-196
• /
• 2020

Mosquitos serve as vectors for diseases, causing inconvenience as well as a threat to human life and health. Concern about mosquitos introducing and spreading new diseases has been intensifying. We observed a variety of mosquito habitats based on land cover classification from Korea's Ministry of Environment, and the mosquito species that could appear were classified according to the each habitat type. Finally, we suggested the best control methods for each type of habitat considering habitat characteristics and the ecological traits of mosquitos. Urban areas harbor various habitats for pests, contributing significantly to mosquito habitats. Control must be performed regarding larva and adults because various sources for habitats exist. Public mosquito control programs such as educational training, as well as information brochures can be effective in managing mosquito populations and public health. Agricultural areas show high densities of mosquito larva to lentic zones such as reservoirs, wetlands, paddy fields. So, biological control using natural predators may be effective in controlling mosquito populations. Forests are major habitats for Aedes albopctus, so physical controls should be deployed for residents living nearby, and excessive deforestation should be minimized. Other areas including aquatic ecosystems should be adopted regarding biological control using Bti (Bacillus thuringiensis var. israelensis) and chemical control for eradicating mosquitos. We classified habitats into four types of land cover patterns considering ecological traits and habitat preference, and suggest adequate control methods for each habitat type. Our suggestion can be used to positively contribute toward effective managing mosquito's density and reducing the damage to public health.