• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.256-259
• /
• 2003

In this paper, a design of multi-layered BPF(bandpass filter) using LTCC(Low Temperature Co-fired Ceramic) process by a lumped-elements is proposed for SOP(system-on-a-chip) of wireless communication systems. The proposed BPF improved a characteristic of rejection band to build an attenuation pole caused by structurally adjacent co-inductance and coupling. The simulation data shows a bandwidth of 90MHz from a center frequency of 2.4GHz, a return loss of 27dB, an insertion loss of 3.2dB, and an attenuation of at least 20dBc at $f_0{\pm}250MHz$. Simulations have used serenade circuit simulation and HFSS EM simulation.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.188-192
• /
• 2003

A multilayer two-stage LC bandpass filter using low-temperature cofired-ceramic (LTCC) is proposed in this paper. The proposed bandpass filter is composed of two ceramic substrates with different dielectric constant instead of single ceramic material from top to bottom layer. The bandpass filter size is $2.0 mm{\times}1.2 mm{\times}0.8 mm$. Positioning of attenuation polefrequency, importance parameter for a performance of filter, is discussed using even-odd mode analysis by tuned capacitance of coupling capacitor and those results is implemented to LTCC filter circuit. Measured filter performances show that the insertion losses are -4.5dB, -4.1dB at 2.45GHz, 2.75GHz and the return losses are -8.5dB, 8.7dB.

• 한국통신학회논문지
• /
• 제22권6호
• /
• pp.1251-1258
• /
• 1997

Generally, it is very important to study selective coupling between cavities of the filter structure using multimode cavity resonator. In this paper, we have manufactured 5-pole bandpass filter(BPF) using dual and triple-mode cavity resonator. To do so, we have derived the formulas for coupling coefficient about coupling between TE-modes from TM/TE-mode's tangential and lognitudinal field intensities each other. To implement the Chebyshev response, the intercabity slot combining dual-mode and triple-mode is designed to couple one H-field of TE-mode parallel to slot plate. In this paper, specially it is derived the formulas for T $E_{11p}$-mode from TE-modes, and determined after obtaining location and size of intercabity slot from the equation. In this ppaer, based on this result, we designed and implmented teh bandpass filter operated at the center frequency of 14.5GHz with a Chebyshev response. For the manufactured cavity filter, dual-mode and triple-mode cavity are resonted by two orthogonal T $E_{113}$-modes, and by two orthogonal T $E_{113}$-modes and one T $M_{012}$-mode, respecitively. The 2-stage 5-pole BPF proposed in this paper has the insertion loss of -2.32dB, the reflection loss of -15dB in the passband, and the out-or-rejection of -67dB.

• Journal of electromagnetic engineering and science
• /
• 제13권2호
• /
• pp.93-103
• /
• 2013

This paper presented a novel approach for the design of a tunable dual-band bandpass filter (BPF) with independently tunable passband center frequencies and bandwidths. The newly proposed dual-band filter principally comprised two dual-mode single band filters using common input/output lines. Each single BPF was realized using a varactor-loaded transmission line resonator. To suppress the harmonics over a broad bandwidth, a defected ground structure was used at the input/output feeding lines. From the experimental results, it was found that the proposed filter exhibited the first passband center frequency tunable range from 1.48 to 1.8 GHz with a 3-dB fractional bandwidth (FBW) variation from 5.76% to 8.55%, while the second passband center's frequency tunable range was 2.40 to 2.88 GHz with a 3-dB FBW variation from 8.28% to 12.42%. The measured results of the proposed filters showed a rejection level of 19 dB up to more than 10 times the highest center frequency of the first passband.

• ETRI Journal
• /
• 제30권4호
• /
• pp.615-617
• /
• 2008

A novel and compact elliptic-function bandpass filter is proposed in this letter. The techniques of slot etching and the addition of open stubs are applied to enhance the self-inductance and self-capacitance of hexagonal open-loop resonators. Thus, size reduction and improved transmission performance are obtained. Compared to the performance of the conventional design, the central frequency and insertion loss are reduced by 28% and 3.1 dB, respectively. Measurements show that the proposed filter has a fraction bandwidth of 23% at the central frequency of 1.84 GHz, and its insertion loss in the passband is less than -1.5 dB. The bandpass filter occupies only 12 mm${\times}$21.2 mm (approximately $0.24{\lambda}_g{\times}0.14{\lambda}_g$).

• 대한전자공학회논문지SD
• /
• 제44권12호
• /
• pp.7-11
• /
• 2007

본 논문에서는 MMIC 응용을 위한 dielectric-supported air-gapped microstrip line (DAML) 구조를 이용하여 dual-mode stepped impedance 링 공진기를 설계 제작하였다. 링 공진기는 표면 마이크로머시닝 기술을 이용하여 만들어졌다. DAML ring resonator는 다층구조로써 공기중에 위치한 신호선과 MMIC 응용에 적합하도록 CPW가 한 평면에 구성되 있으며 DAML-CPW 트랜지션이 자유로운게 특징이다. DAML 링 공진기는 $10{\mu}m$ 높이로 GaAs 기판 으로부터 띄어져 있다. 대역통과 여파기는 dual-mode 공진을 하며 stepped impedance 이용한 구조이다. 측정결과로 중심주파수 97 GHz에선 감쇠특성은 15 dB, 삽입손실은 2.65 dB를 보였으며, 상대 대역폭은 12 %를 나타냈다. 이같은 구조의 대역통과 여파기는 MMIC 와의 직접화에 유리하다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.623-626
• /
• 2005

In this paper, we proposed a new type SIR bandpass filter using DAML. This filter is consisted of 2 layers with MEMS resonator layer and CPW feed line. DAML ring resonator is elevated with $10\;{\mu}m$ height from GaAs substrate. Using MEMS processing, we are able to realize SIR bandpass filter easily. Furthermore it is useful to integrate on conventional MMICs because it has CPW interfaces and ring resonator is isolated from substrate by air-gap. We optimized and measured the results that $S_{21}$ attenuation at rejected band is over 15 dB, insertion loss is inside the limit of 3 dB, and relative bandwidth is about 10 % at 60 GHz

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.361-365
• /
• 2003

In this paper, we proposed the effective serial connection methodology of PBG resonator with defect mode. We use the big difference of impedance ratio in connection region, for example dual PBG, for serial connection. This method reduces the PBG cells and is able to control the pole of bandpass filters. This result in flexibility in design of bandpass filter. Our PBG bandpass filter is modeled by using the ideal transmission line model. This model is very easy, fast, and effective for PBG structure.

• 한국항행학회논문지
• /
• 제21권1호
• /
• pp.84-89
• /
• 2017

본 논문은 CRLH (composite right/left handed) 전송선로 구조의 4중 모드 공진기를 이용하여 높은 대역간 격리도를 갖는 이중-광대역 대역통과 여파기를 설계하는 방법을 제안한다. CRLH 전송선로 구조를 해석하여 4중 모드 공진기의 s-패러미터와 공진 주파수를 유도하였다. 유도된 s-패러미터를 이용하여 새로운 구조의 이중-광대역 대역통과 여파기를 설계, 제작하였다. 측정 결과는 2.8-5.52 GHz, 9.68-12.26 GHz의 이중 통과대역에서 각각 1.08 dB, 2.01 dB의 삽입손실을 갖고, 6.34-8.42 GHz의 중간대역에서 38dB의 대역 격리도를 가져 설계 결과와 잘 일치하는 특성을 보여 주었다.

• ETRI Journal
• /
• 제38권6호
• /
• pp.1190-1196
• /
• 2016

We propose a new bandpass filter (BPF)-based online channel normalization method to dynamically suppress channel distortion when the speech and channel noise components are unknown. In this method, an adaptive modulation frequency filter is used to perform channel normalization, whereas conventional modulation filtering methods apply the same filter form to each utterance. In this paper, we only normalize the two mel frequency cepstral coefficients (C0 and C1) with large dynamic ranges; the computational complexity is thus decreased, and channel normalization accuracy is improved. Additionally, to update the filter weights dynamically, we normalize the learning rates using the dimensional power of each frame. Our speech recognition experiments using the proposed BPF-based blind channel normalization method show that this approach effectively removes channel distortion and results in only a minor decline in accuracy when online channel normalization processing is used instead of batch processing