• Proceedings of the Korean Geotechical Society Conference
• /
• 1991.10a
• /
• pp.62-74
• /
• 1991

The stability of the Carsington dam at Derbyshire in middle Eng1and is analysed using the Kinematical Element Method (Program LSDKSLOP). The thin yellow clay layer and the pore pressure at the failure surface, which goes through the core and boot, are considered. The influence of the pre-existing shears of the yellow clay on the stability of the Carsington dam is studied. Comparisons with the calculated and the observed failure surface are presented.

• Korean Journal of Computational Design and Engineering
• /
• v.10 no.1
• /
• pp.17-26
• /
• 2005

In-line skate generally consists of four major parts: boot, frame, bearing and wheel, and the most important part among those for necessary functionality is the frame. It is the most expensive, and it also makes a decisive role in practical race skating. The functional behavior of a frame is greatly affected by external dynamic forces as well as the static weight of a skater. We are proposing a new inline speed-skating frame design that has been improved in structural strength and weight for providing optimum speed in $20\sim40km$ marathon skating.

• Proceedings of KOSOMES biannual meeting
• /
• 2017.11a
• /
• pp.49-49
• /
• 2017

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2023.07a
• /
• pp.409-412
• /
• 2023

검색을 통해 찾은 컴퓨터 부품의 정보(가격, 호환 여부, 성능) 등을 자동으로 체크 해주고 이를 통해 만든 컴퓨터 견적을 여러 사람과 공유 및 열람을 할 수 있고 대화창과 같은 게시판을 통해 서로의 지식과 정보를 쉽게 공유할 수 있는 웹 사이트를 개발하였다. 이 사이트가 사용자들의 합리적인 소비로 이어지기를 기대한다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.49 no.8
• /
• pp.16-21
• /
• 2012

The gyro sensor that made by MEMS process is generated an accumulated error(drift) and escape the zero angle following during calculation of rotate angle. This study propose BACF(Boot Angle Compensation Filter) algorithm for prevent escape zero angle and DCF algorithm for remove accumulated error. DCF algorithm is designed for acquire accurate turn of ratio by remove offset and noise components. BACF algorithm is obtained average offset that removed noise components by recursively calculate. Experimental environment, two-axis gyro sensor and mobile OIS camera mounted control board and 5Hz oscillation of ${\pm}0.5^{\circ}$ for the experiments were carried out. BACF and DCF algorithm is applied and the resulting accumulated error did not occur and exactly zero angle following results were made.

• Communications for Statistical Applications and Methods
• /
• v.19 no.3
• /
• pp.405-414
• /
• 2012

In a stratified sample, the sampling frame is divided into non-overlapping groups or strata (e.g. geographical areas, age-groups, and genders). A sample is taken from each stratum, if this sample is a simple random sample it is referred to as stratified random sampling. In this paper, we study the bootstrap inference (including confidence interval) and test for a stratified population mean. We also introduce the bootstrap consistency based on limiting distribution related to the plug-in estimator of the population mean. We suggest three bootstrap confidence intervals such as standard bootstrap method, percentile bootstrap method and studentized bootstrap method. We also suggest a bootstrap test method computing the $ASL_{boot}$(Achieved Significance Level). The results of estimation are verified using simulation.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.16 no.1
• /
• pp.27-38
• /
• 1996

This study was conducted to evaluate the potential of Festulolium braunii(Festuca pratensis Huds. $\times$ Loliurn mulrijZorum Lam.)as forge sources. The experiment was arranged in a split plot design with four replications from Feb. 1995. to Jan. 1996 at Hohenheim university. Main plots consisted of three forage species, Festulolirtrn braunii(Paulita), Lolium multiJomm(Lemtla), and Secale cereale(Halo) and subplots consisted of three maturity, boot, heading, and anthesis. The growth characteristics, DM yields, nutritive value, N and energy balance were observed. The heading date of Festulolium braunii was about two days earlier than that of Loliunz mrtltiflorum, farthermore Fesrulolium braunii retained higher leaf weight ratio(LWR) than other species. Festulolium brarrnii failed to show any significant differences in grass length, number of tillers, LAI, CGR, and DM accumulation when harvested at the same stage of maturity as compare with Loliurn mulriiflorutn or Setale cerede, bur the content of CP, OMD, and mineral elements and NEL value of Festulolium braunii compare to othes were slightly increased(P<0.05), while the content of NDF, ADF, and lignin decreased(P<0.05). The yield of CP was greater for Festulolium braunii than for Lolium multfimm and yields of DOM and NEL per unit area(ha) for Festulolium braunii were greater than for other species(P<0.05). The equivalent or higher DM production and nutritive value are obtained when Festulolium braunii are cut during the period from boot to anthesis stages, therefor DM intake, preference, and N and energy balance were also higher for Festulolirtm braunii compare to for other species. It could be suggested that Lolium multrfirum would be a more suitable substitute to Festuloliron braunii without decreasing forage production and quality, but the substitutive effect of Secale cereale would be difficult because of the maor differences in growth type and period compare to Fesrulolium braunii. From above the results of this experiment it appears that Festulolium braunii have a potential to provide forage sources. but funher research is needed to ascertain their potential under the climate of Korea.

• Journal of Advanced Navigation Technology
• /
• v.24 no.5
• /
• pp.438-443
• /
• 2020

To transfer files between nodes on network based on Ethernet, file transfer protocol (FTP) on TCP/IP and trivial file transfer protocol (TFTP) on UDP/IP are mostly used. Due to the lack of resources (processor, memory and so on) in the embedded system where we generally use for simple works with small firmware like ones; many of the systems implement only UDP/IP for their network stacks. Thus, TFTP is greatly to be preferred. For examples, environmental sensor devices for sensor networks, Boot Loader for general embedded device and preboot execution environment (PXE) boot for PC provide the TFTP. The logic of TFTP is simple for file transmission but, there is Stop-And-Wait problem during the process which occurs long blocking time. In this paper, we propose an algorithm which called QuTFTP(Quick UDP Trivial File Transfer Protocol) to reduce the length of the blocking time and to be compatible with the legacy TFTP.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.12
• /
• pp.123-132
• /
• 2014

In this paper, we study the verification techniques for OS integrity that can be more fatal than applications in case of security issues. The dissemination of smartphones is rapidly progressing and there are many similarities of smartphones and PCs in terms of security risks. Recently, in mobile network environment, there is a trend of increasing damages and now, there are active researches on a system that can comprehensively respond to this. As a way to prevent these risks, integrity checking method on operation system is being researched. As most integrity checking algorithms are classified by verification from the levels before booting the OS and at the time of passing on the control to the OS, in which, there are minor differences in the definitions of integrity checking or its methods. In this paper, we suggests the integrity verification technique of OS using a boot loader and a physically independent storing device in the mobile device.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.5
• /
• pp.1333-1344
• /
• 1998

In comparison to traditional monolithic kernel, the microkernel based operating system has slower speed. But Microkernel based OS suites for multi-computer system, because It has benefits in the modularity and portability point of view. Each unit and memory of a processor must be initialized by using the boot information so that the multi-computer system OS can actively run the function of the system. This paper describes the microkernel initialization of OSF/1 AD3 MISIX that is based on OSF/1 AD3 for SPAX. It will introduce the initialization of microkernel for the SPAX which is High-speed Parallel Processing system in terms of Boot, Initialization related hardware and memory address space construction. This paper will also state the test result based on test environments. Microkernel tested in single node system that has 4 processors.