• 한국연소학회:학술대회논문집
• /
• 2013.06a
• /
• pp.41-43
• /
• 2013

In order to simulate and visually observe combustion phenomena in cylindrical radial-flow porous inert media, a radial multi-channel burner, made of transparent quartz plates, was fabricated. Flame stabilization characteristics and its pulsating instability in the burner were experimentally investigated with respect to various mixture flow rates and equivalence ratio. As a result, five different flame behaviors, such as stable flame, pulsating instability, sudden extinction, blowout and unstable extinction, were observed. Mean radial position of circularly arranged multi-flame and its averaged burning velocity were measured and then compared to the freely propagating flame. The multi-flame pulsation frequency is about several tens of Hz and it is supposed to be generated by the heat diffusion enhancement to cold pre-mixture by the intensive gas-solid interaction.

• 한국연소학회:학술대회논문집
• /
• 2013.06a
• /
• pp.97-98
• /
• 2013

Flame behaviors in meso-scale rectangular channels are largely influenced by heat recirculation through wall. In order to investigate the effects of wall thermal property on the heat recirculation and flame behaviors, meso-scale rectangular channels, of which upper and lower walls are made of quartz, stainless steel and silicon carbide and front and rear walls of quartz for flame visualization, were fabricated in this study. As a result, characteristic mixture velocities of propane-air flame, such as transition, stationary, and instability onset velocities, were measured for each channel and various mixture conditions. The results show that thermal conductivity has a close relationship to the characteristic velocities.

• Proceedings of the KIPE Conference
• /
• 2001.07a
• /
• pp.54-57
• /
• 2001

Currently there are very limited amounts of resources and serious amounts pollution. Wind power generation system have an advantage of unlimited and unpolluted amount of energy resource. In this paper, for the application of these characteristic and for the generation to be achieved regard of districts and geographical features the energy continuously. The operation characteristics of system were analyzed through experiments for a trial product.

• Proceedings of the KIPE Conference
• /
• 2002.11a
• /
• pp.74-77
• /
• 2002

Combined generation system of Photovoltaic and wind generation have shortcoming that is different output power according to change of weather. So, the combined generation system is required backup system that such as a storage battery to supply energy, when not enough photovoltaic and wind power source for power supply equally and continually, because the energy source is changeable and stable through change of weather as irradiation, temperature, wind speed, wind direction, seasons, etc..

• Proceedings of the KIPE Conference
• /
• 2002.11a
• /
• pp.209-212
• /
• 2002

In electrical machinery and apparatus, the most important problem is protect of machinery and apparatus in duo to transient phenomena and overload on operation. Particularly by advanced technology of late, there is demand for low cost of equipments and high percentage of use of equipments. Therefore, protection of machinery and apparatus in condition of overload is more valued considering that all efficiency increase is passed by operating all machinery and apparatus in condition of heavyload. In this paper, the suggested system is add overload protect system using CT in condition of overload.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2002.04b
• /
• pp.1147-1150
• /
• 2002

초 중 고등학교의 컴퓨터의 보급이 증가함에 따라 컴퓨터를 이용한 수업이 증가하고 있다. 컴퓨터를 사용한 수업이 여러 가지 장점이 있으나, 학생들을 통제할 수 없다는 단점도 있다. 수업을 위해 강의 홈페이지에 접속할 때, 교수자의 위치에서는 학습자의 모니터를 볼 수 없기 때문에 강의 홈페이지가 아닌 다른 웹사이트에 접속을 하여도 이를 통제할 수가 없다. 본 논문에서는 컴퓨터를 이용한 수업을 보다 효율적으로 하기 위한, Client/Server에 기반한 효율적인 원격 학습 교육 시스템을 설계 및 구현하였다.

• Proceedings of the KIEE Conference
• /
• 1995.07a
• /
• pp.437-439
• /
• 1995

In this paper, a mew maximum power point tracker (MPPT) using Fuzzy Controller is proposed to improve energy conversion efficiency. Temperature compensation effect means that Photovoltaic voltage is change in condition irradiation, temperature and ect. Fuzzy algorithm is applied to control Boost MPPT converter by Temperature compensation effect. In this paper, temperature compensation range is $-40^{\circ}C{\sim}+100^{\circ}C$.

• Journal of Korean Society of Water and Wastewater
• /
• v.19 no.2
• /
• pp.228-237
• /
• 2005

The main purpose of this study was to investigate the red water reducing effects of phosphate based inhibitor when it was applied to water distribution system. The effects of pH, alkalinity, calcium concentration in the reduction of the red water also studied. The most finished water in Korea showed relatively high corrosiveness and was required to introduce some types of corrosion reducing methods such as addition of alkalinity. The precipitation of $CaCO_3$ by addition of $Ca(OH)_2$ formed porous film on the surface of the carbon steel pipes and was displaced easily from the surface of the pipes; on the other hand, addition of zinc phosphate (ZOP) formed reliable film on the surface and reduced iron release and color. Although the main function of ZOP was to suppress the release of Pb and Cu, it also reduced iron concentration released from water distribution pipes.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.10a
• /
• pp.87-91
• /
• 2013

Rubber Components have been playing important role for the isolation of noise and vibration of vehicle. This paper is presented the new method of dynamic modeling of rubber component for simulating the dynamic characteristics of it under the varing loading condition. Rubber dynamic model consists of the hyperelastic, viscoelastic and elasto-plastic characteristics of rubber. Dynamic proporties of rubber are calculated at each preload and frequency conditions, compared to test data, and evaluated the validity of rubber dynamic model. This technique is expected to understand and improve the characteristics of noise and vibration with relation to rubber components.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.3
• /
• pp.279-286
• /
• 2010

In this paper, we provide a robust track-following controller design method for the stable coarse seek control. Due to the inaccurate velocity control during a coarse seek, the shake of fine actuator is generated and thus a gain-up track-following control is required to complete stably the coarse seek. To this end, a loop gain adjustment algorithm is introduced to estimate accurately the shake of fine actuator. A weighting function can be properly selected from a minimum tracking gain-up open-loop gain, calculated from the estimated shake quantity of fine actuator. A robust tracking gain-up controller is designed by considering a robust $H_{\infty}$ control problem using the weighting function. The proposed design method is applied to the coarse seek control system of an optical rewritable drive and is evaluated through the experimental results.