• 한국의류산업학회지
• /
• 제17권2호
• /
• pp.265-277
• /
• 2015

The aim of this study was to successfully reflect human body changes on the transformation of the virtual body within 3D virtual fitting spaces. For this purpose, existing problems of shape transformation of the virtual body were analyzed and regression equations which provides useful basic data for transformation of the virtual body that can be applied usefully to the 3D virtual fitting system was developed. Necessary data for the analyses were body measurement and 3D scan data of women with average physical form between the ages of 40 through 49. The reason that we used human body changes of the female subjects in their forties was based on the recognition that fundamental female body changes start to occur from age of forty. Body shapes were largely divided into 3 groups according to obesity which was found to be the biggest factor of shape change. Seven factors were extracted based on factor analysis of 47 body measurement categories and regression equations were created to extract specific measurements for each BMI group based on these seven factors. The major contribution of this paper can be summarized as follows. First, the regression equations to extract specific measurements based on the 7 representative variables remediated existing problem of virtual bodies as it increased the number of body shape transformation areas. Second, the regression equations helped to overcome the problem of current failing to reflecting changes in body cross-section shape based on simple girth measurements based on analysis of cross-section distances.

• International Journal of Aeronautical and Space Sciences
• /
• 제7권2호
• /
• pp.86-103
• /
• 2006

Using a combination of force transducer measurement to quantify net lift force, high frame rate camera to quantify and subtract inertial contributions, and Digital Particle Image Velocimetry (DPIV) to calculate aerodynamic contributions in the spanwise plane, the contribution of spanwise flow to the generation of lift force in wings undergoing a pure flapping motion in hover is shown as a function of flapping angle throughout the flapping cycle. These experiments were repeated at various flapping frequencies and for various wing planform sizes for flat plate and span wise cambered wings. Despite the previous identification of the importance of span wise fluid structures in the generation of lift force in flapping wings throughout the existing body of literature, the direct contribution of spanwise flow to lift force generated has not previously been quantified. Therefore, in the same manner as commonly applied to investigate the chordwise lift distribution across an airfoil in flapping wings, spanwise flow due to bulk flow and rotational fluid dynamic mechanisms will be investigated to validate the existence of a direct component of the lift force originating from the flapping motion in the spanwise plane instead.

• 한국운동역학회지
• /
• 제13권3호
• /
• pp.265-276
• /
• 2003

The objective of this research is to provide basic data for improving athletic performances, suggesting methods that can be utilized at games and coaching movements in the snatch, by analyzing the level of contribution of muscles to the movements of the snatch lift through three-dimensional imaging and EMG analysis between skilled and unskilled lifters. To this end, three high school students (the skilled group), three middle school student (the unskilled group) were selected; two digital video cameras and electromyography were used. The muscles measured by an EMG include gastrocnemius muscle, biceps femoris muscle, erector spinae, latissimus dorsi muscle, trapezius muscle, and brachioradialis. Based on the Ariel Performance Analysis System (APAS) program, the results of the analysis are summarized as follows. 1. In performing snatch pulls, the skilled lifters were found to simultaneously move the weight centers of the body and the barbell close to vertical, close to the shoulders in the pulling portion; in snatching and grabbing the barbell from a sited position, it was observed that the shorter the time for adjusting to change in the height of the barbell by using rotational inertia, the better it is to perform the movements. 2. The skilled lifters were observed to perform stable and efficient movements in grabbing the bar in a sited position, by moving the barbell and weight center of the body close to vertical and moving the shoulder joint under the bar fast. 3. The results of the EMG analysis of the entire movements from the snatching portion to the portion of grabbing the bar in a sited position show that when the skilled lifters lifted the barbell vertically during the pulling portion, their shoulder joints were extended to put more weight on biceps femoris muscle and brachioradialis; and in snatching and grabbing the bar from a sited position, it was found desirable to increase the myoelectrical activity of erector spinae in order to achieve a balance in the movements of the hip joint between font and rear, as the weight centers of the body and the barbell move higher. On the other hand, the unskilled lifters were found that in response to change in posture, they increase their muscular strength inefficiently in performing the movements throughout the entire lifting process.

• 한국의상디자인학회지
• /
• 제9권1호
• /
• pp.161-171
• /
• 2007

The purpose of this study was to classify the lower body of the lost women and to investigate the three-dimensional characteristics of each lower body somatotype of them. The subject were ninety seven women whose. age were twenties and whose height and bust girth were in the range of mean$\pm1\delta$ of typical body size of twenties' Korean women. The forty one variables of their lower body were measured by Martin's Anthropometric Instrument. And they were analyzed for mean, standard deviations factor analysis, and cluster analysis. In the second phase of analysis, the three participants were re-selected in each type were measured by Sliding Guage and analyzed their lower body somatotype. The results were as follows; The components of lower body of 20s' women were extracted with 7 factors through factor analysis and orthogonal rotation by the method of Varimax. The rate of the cumulative contribution was 84.1% the first factor was the thickness of lower body, the second factor was the vertical size of lower body the third factor was the front shape of hip, the forth factor was the vertical size of hip, the fifth factor was the shape of abdomen, the six factor was the flat-ratio of waist and the seventh factor was flat-ratio of hip. The somatotype of 20's women's lower body can be classified into 3 types. Type 1 is the standard somatotype of 20's women's lower body and the 34.0% of the participants in the study was categorized into type 1. Type 2 is a short and corpulency type with protruded abdomen and hip and the 29.9% of the participants in the study was categorized into type 2. And the type 3 is a tall and thin type with plat abdomen and hip and the 37.1% of the participants was categorized into type 3.

• 농업생명과학연구
• /
• 제50권2호
• /
• pp.117-124
• /
• 2016

본 연구에는 경남의 혈통등록우 경매시장 A, B 지역에서 2014년도부터 2015년도에 경매된 한우송아지 중에서 경매가격이 있는 19,592두의 경매가격자료를 이용하였고 경매가격에 미치는 환경요인 및 요인별 기여도를 추정하였다. 연구의 결과를 살펴보면 송아지경매가격에 대한 모든 효과에서 고도의 유의적인 차이(p<0.01)를 나타내었고, 준부분 상관제곱(semi-partial correlation)값을 이용한 요인별 기여도 분석에서 회귀식의 수정모형 적합도(Adj R-Square)가 0.701로 나타났으며, 성, 경매체중, 출품개월령, 경매년도, 경매계절 및 경매지역의 준부분상관값은 각각 0.11563, 0.20013, 0.02823, 0.10727, 0.00330 및 0.02963으로 나타났다. 요인별 기여도에서 송아지 체중의 기여도가 가장 높은 것으로 나타났으며, 성, 경매년도, 경매지역 및 출품개월령 순으로 영향을 미치는 것으로 나타났다. 송아지 생산농가에서 경매가격을 잘 받기 위해서는 송아지의 발육정도를 측정할 수 있는 체중의 개량 및 적절한 사양 관리가 매우 중요할 것으로 사료된다. 또한 향후에는 개량방향과 맞는 우수한 유전자의 생산 및 확보가 농가 경쟁력 및 소득증대에 이바지할 것으로 사료된다. 송아지경매가격 및 요인별 기여도에 대한 연구는 아직 많이 부족한 상황으로 더 많은 연구가 이루어져야 할 것으로 사료된다.

• 소음진동
• /
• 제9권4호
• /
• pp.769-777
• /
• 1999

Research on vibration of a vehicle with a transversely mounted 4-cylinder engine was performed using a vector synthesis method, Data of the engine vibration for the vector synthesis method was obtained experimentally and the data was ODS-fitted to calculate vibration level on any engine location assuming that the engine is rigid body in the frequency range of interest. In order to derive the excitation force on the vehicle body, the displacements were converted from the acceleration of engine. The transfer functions from engine mounts to toe pan on the floor were obtained experimentally. The vibration level on the toe pan was predicted by multiplying the excitation force by the transfer function. The predicted vibration level was compared with experimental data and the result was reasonable. Using the developed method, analysis was made for the effect of body fixture conditions of the vehicle when testing the engine vibration and for the effect of the transfer functions when the engine is installed or when the engine is removed. Finally the degree of contribution for 12 transfer paths was calculated.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2002년도 ICCAS
• /
• pp.77.2-77
• /
• 2002

Human upright standing posture in the sagittal plane is studied, when it exposed in the antero-posterior vibration. A two link inverted pendulum model is considered and described its functional behavior in terms of ankle and hip joint according to the dominant joints that provides the largest contribution to the corresponding human reactionary motion. The data is analyzed, both in the time domain and the frequency domain. Subjects behave as a non-rigid pendulum with a mass and a spring throughout the whole period of the platform motion. When vision was allowed, each segment of body shows more stabilized.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1988년도 한국자동제어학술회의논문집(국내학술편); 한국전력공사연수원, 서울; 21-22 Oct. 1988
• /
• pp.633-638
• /
• 1988

In this paper, a zero-velocity update technique to improve navigation accuracy of a SDINS(Strapdown Inertial Navigation System) has been studied. An indirect feedback Kalman filter which includes SDINS error equations based on a quaternion between body-fixed frame and local level navigation frame is employed for processing zero-velocity updates in an on-board navigation filter. Simulation results for land-mobile vehicle show that the zerovelocity update technique make a significant contribution to improving SDINS performance without any external aids.

• 대한간호학회지
• /
• 제28권2호
• /
• pp.256-269
• /
• 1998

The purpose of this study was to evaluate the usefulness of variables which were known to be related to blood pressure for discriminating between hypertensive and normotensive groups. Variables were obesity, serum lipids, life style-related variables such as smoking, alcohol, exercise, and stress, and demographic variables such as age, economical status, and education. The data were collected from 400 male clients who visited one university hospital located in Incheon, Republic of Korea, from May 1996 to December 1996 for a regular physical examination. Variables which showed significance for discriminating systolic blood pressure in this study were age, serum lipids, education, HDL, exercise, total cholesterol, body fat percent, alcohol, stress, and smoking(in order of significance). By using the combination of these variables, the possibility of proper prediction for a high-systolic pressure group was 2%, predicting a normal-systolic pressure group was 70.3%, and total Hit Ratio was 70%. Variables which showed significance for discriminating diastolic blood pressure were exercise, triglyceride, alcohol, smoking, economical status, age, and BMI (in order of significance). By using the combination of these variables, the possibility of proper prediction for a high-diastolic pressure group was 71.2%, predicting a normal-diastolic pressure group was 71.3%, and total Hit Ratio was 71.3%. Multiple regression analysis was performed to examine the association of systolic blood pressure with life style-related variables after adjustment for obesity, serum lipids, and demographic variables. First, the effect of demographic variable alone on the systolic blood pressure was statistically significant (p=.000) and adjusted $R^2$was 0.09. Adding the variable obesity on demographic variables resulted in raising adjusted $R^2$to 0.11 (p=.000) : therefore, the contribution rate of obesity on the systolic blood pressure was 2.0%. On the next step, adding the variable serum lipids on the obesity and demographic variables resulted in raising adjusted R2 to 0.12(P=.000) : therefore, the contribution rate of serum lipid on the systolic pressure was 1.0%. Finally, adding life style-related variables on all other variables resulted in raising the adjusted $R^2$to 0.18(p=.000) ; therefore, the contribution rate of life style-related variables on the systolic blood pressure after adjustment for obesity, serum lipids, and demographic variables was 6.0%. Multiple regression analysis was also performed to examine the association of diastolic blood pressure with life style-related variables after adjustment for obesity, serum lipids, and demographic variables. First, the effect of demographic variable alone on the diastolic blood pressure was statistically significant (p=.01) and adjusted $R^2$was 0.03. Adding the variable obesity on demographic variables resulted in raising adjusted $R^2$to 0.06 (p=.000) ; therefore, the contribution rate of obesity on the diastolic blood pressure was 3.0%. On the next step, adding the variable serum lipids on the obesity and demographic variables resulted in raising the adjusted $R^2$ to 0.09(p=.000) ; therefore, the contribution rate of serum lipid on the diastolic pressure was 3.0%. Finally, adding life style-related variables on all other variables resulted in raising the adjusted $R^2$ to 0.12 (p=.000) : therefore, the contribution rate of life style-related variables on the systolic blood pressure after adjustment for obesity, serum lipids, and demographic variables was 3.0%.

• International Journal of Contents
• /
• 제13권2호
• /
• pp.14-20
• /
• 2017

The purpose of this study was to investigate the association of obesity with medical care use and costs according to overall diseases, cerebrovascular diseases (CVD), ischemic heart disease (IHD), hypertension (HTN) and diabetes mellitus (DM). The final sample was a group of persons who were free of diseases mentioned above and were not underweight. Their baseline screening program data and health insurance contribution data were connected with a 7-year medical claim database. The participants were classified according to their baseline BMI into normal, overweight, obese, and severely obese groups. Given the disease type, the total costs of DM showed the largest difference in each obesity group in both males and females. Also, the pharmacy costs for DM were more relevant than any other type of service to the obesity level. Considering the high prevalence of obesity and the relevantly increased medical care use and costs, there is a need for reduction in medical costs through obesity prevention efforts.