• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.7
• /
• pp.692-698
• /
• 2003

This paper presents IM model which is produced in 3 port RF passive component. We calculated forward and reflect PIM of 3 port component by using the model. And they are reasonable agreement with measurement result like below. In the case of forward IM, calculated result is -122 dBc(at 43 dBm), which differ 2.5 dB with measurement result. And reflected IM, the average calculated result is -130 dBc(at 43 dBm), which differ 3 dB with measurement result. The results which are calculated and measured under various condition(IM source level, frequency sweep, contour length, etc.) show that forward method gets more fixed result than that of reflect. Consequently, PIM of 3 port component is predicted and analyzed for desensitizing by the proposed model.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.11
• /
• pp.1193-1203
• /
• 2008

An active antenna(AA) can have wider bandwidth and more gain with small antenna size than those of passive antennas. However, AA inherently generates thermal noise and spurious signals from an active device. Moreover, the spurious performance of AA is very important in a highly sensitive receiving system since it is located at the front end of the receiving system. In this study, we developed an AA with $100{\sim}500\;MHz$, having the output P1dB higher than 3 dBm and little spurious signals in real environments. To achieve such performance, we designed an AA with 3-stage amplifier using CD(common drain) FET and 2 BJTs. Its electrical performances were simulated using ADS. The measurement results for typical gain, NF, OIP3, VSWR and P1dB in the required frequency band were 9.7 dBi, 10 dB, 14 dBm, 1.7:1 and 3 dBm respectively. They are in good agreement with simulation results. The unwanted spectrum level of the proposed AA is $10{\sim}30\;dB$ lower than that of the antenna with CS(common source) FET configuration at a west suburban area of Seoul, which shows that the proposed AA can be applicable to a highly sensitive receiving system for detecting unknown weak signals mixed with broadcasting and civilian communication signals.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.04a
• /
• pp.54-54
• /
• 2006

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.3 s.357
• /
• pp.92-97
• /
• 2007

Switching mode amplifiers have been studied widely for use at microwave frequency range, and the class E amplifier which is a type of switching mode amplifier offers very high efficiency approaching 100%. In this paper, 2.4GHz microwave class E amplifier with 66% power added efficiency (PAE) and 17.6dBm output has been linearized for use at wireless LAN transmitter, and digital predistortion technique with look up table is applied. With -3dBm input power of wireless LAN, measured output spectrum can meet the required IEEE 802.11g standard spectrum mask, and the digital predistortion output spectrum has been improved by 5dB of ACPR at 20MHz offset from center frequency.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.8 s.111
• /
• pp.719-724
• /
• 2006

In this paper, we designed the double conversion down mixer by using Half-LO frequency in 2.3 GHz band. The IF frequency is obtained by supplying two LO frequencies to HEMT in both gate type and resistive type. The proposed mixer uses Half-LO frequency the same way as conventional sub-harmonic mixers. However the proposed one uses fundamental component of Half-LO frequency in first stage instead of using second harmonic components of Half-LO frequency, and the IF frequency is obtained by resistive type mixer in second stage, thereby the proposed mixer can improve linearity in comparison with conventional active mixer. We can verify that the proposed mixer has an conversion loss of 5dBm and IIP3 of 16.25dBm by using 10 dBm Power.

• Journal of Broadcast Engineering
• /
• v.23 no.5
• /
• pp.693-700
• /
• 2018

In this paper, we propose a wireless video transmission scheme, providing medium and long range communication in the 2.4GHz band with beamforming. With this scheme, it is shown that the transmission rate of 32Mbps and received signal power of -77dBm is achieved with 4 antennas of 5dBi and 16dBm transmit power at each antenna connection for the distance of 3.6km. The scheme also provides transmission distance of 20km for 10~12Mbps with the 4 omni-directional antennas of 5dBi.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.2
• /
• pp.45-49
• /
• 2009

In this paper, a direct down conversion LNA/Mixer has been designed and tested for 900Mhz UHF RFID application. The designed circuit has been implemented in 0.18um CMOS technology with 3.3V operation. In this work, a common gate input architecture has been used to cope with the higher input self jamming level. This LNA/Mixer is designed to support two operating modes of high gain mode and low gain mode according to the input jamming levels. The measured results show that the input referred P1dBs are 4dBm of high gain mode and 11dBm of low gain mode, and the conversion gains are 12dB and 3dB in high and low gain mode respectively The power consumptions are 60mW for high gain mode and 79mW for low gain mode. The noise figures are 16dB and 20dB in high gain mode and low gain mode respectively.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.12 no.2
• /
• pp.95-100
• /
• 2006

Central Sericultural Research and Training Institute, Mysore have evolved several highly productive bivoltine hybrids which can produce international grade raw silk. Among them $CSR2{\times}CSR4,\;CSR2{\times}CSR5,\;CSR3{\times}CSR6,\;CSR17{\times}CSR16,\;CSR18{\times}CSR19$ and $CSR12{\times}CSR6$ are being popularized in the field. There is a minimum difference in their economic characters but they appear to differ in survival. Though they are productive under high input management conditions, they are very susceptible to different diseases under normal rearing practices. No systematic attempts have been made to test their susceptibility status / resistance. Thus the present study is a modest attempt to screen the above six productive bivoltine hybrids to two important pathogens viz., Bombyx mori Nuclear Polyhedrosis Virus (BmNPV) and Bombyx mori Infectious Flacherie Virus (BmIFV) along with existing hybrid, $KA{\times}NB4D2$ to assess their susceptibility / resistance. The results shows that the productive hybrid $CSR2{\times}CSR4$ is the most resistant to BmNPV and it is suggested by its highest $LC_{50}$ value followed by $CSR12{\times}CSR6,\;KA{\times}NB4D2,\;CSR3{\times}CSR6,\;CSR17{\times}CSR16,\;CSR18{\times}CSR19,\;CSR2{\times}CSR5$. Based on the $LC_{50}$ value and $LT_{50}$ values for BmIFV, the hybrid $KA{\times}NB4D2$ was found to be the most resistant (1st position) one followed by $CSR3{\times}CSR6$ (2nd position) $CSR2{\times}CSR$ (3rd position) and $CSR12{\times}CSR6$ (4th position) $CSR17{\times}CSR16$, $CSR18{\times}CSR19$ (5th position) and $CSR2{\times}CSR5$ being the least. The response of 7 bivoltine hybrids to both the pathogens BmNPV and BmIFV indicates that, the hybrids $CSR2{\times}CSR4$, $CSR12{\times}CSR6$ and $KA{\times}NB4D2$ were found to be the most resistant when compared to others. Further, $KA{\times}NB4D2$ being less productive hybrid with a shell ratio of 20.08%, the other two hybrids $CSR2{\times}CSR4$ (Cocoon shell ratio, 21.44%) and $CSR12{\times}CSR6$ (cocoon shell ratio, 23.45%) can be considered to be most productive with superior quality cocoon and resistant to both BmNPV and BmIFV pathogens. The overall study indicated that the hybrid $CSR2{\times}CSR5$ is the most susceptible hybrid to both the pathogens.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.12
• /
• pp.2489-2497
• /
• 1994

This paper presents the development of a 10 W solid-state hybrid power amplifier(SSPA). operating over $7.7\sim8.5GHz$. The fabrication and measurement of this amplifier are performed with 3 sections, such as the front one for high gain, the middle one for driving, and high power one, to minimize the risk of failure and to increase the easiness of development. and then the final amplifier is realized by connecting 3 sections above mentioned, DC bias circuit, and temperature compensation circuit on one housing. Total small signal gain obtained is about $45\pm1dB$, the input and output return losses are 25 and 27 dB respectively. The output power measured at 1 dB gain compression point for 3 frequencies at 7.7, 8.1, and 8.5 GHz are $39.8\sim40.4dBm$, which is about 10 W. and the 3rd-order harmonic powers of 2 tones test are 13.34 dBc at output power 37.5 dBm. These obtained results satisfies the initially required specification. and the realized SSPA can be installed as a subsystem of the microwave transponder for telecommunication.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.7 s.98
• /
• pp.681-689
• /
• 2005

This paper presents an ultra wide band(UWB) mixer using anti-parallel diode pair(APDP) with simulation and measurement results. The proposed mixer adopts the even-harmonic direct conversion mixing, which consists of a couple of filter, in-phase wilkinson power divider, wideband $45^{\circ}$ power divider, and APDP. The m mixer is operating over 3.1 to 4.8 GHz and producing quadrature(I/Q) outputs with a conversion loss of 18 dB and input third order intercept point($IIP_3$) of 15 dBm. I/Q outputs also have difference of about 0.5 dB and phase difference of ${\times}3^{\circ}$ and $P_{1dB}$ of 2 dBm.