• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.8
• /
• pp.1394-1400
• /
• 2010

This paper introduces a newly improved Ultra-FRFET that has much better reverse recovery characteristic than that of the typical MOSFET and presents its effectiveness in the HV-BLU system of LCD TVs. The reverse recovery time, $T_{rr}$ of Ultra-FRFET is shorter than 40nsec and the peak value of reverse current, $i_{rr}$ is also much smaller compared to the typical MOSFET's, which are sufficient to prevent the MOSFET’s failures without additional FRDs and diodes in HV-BLU system with a half-bridge resonant inverter topology worked by PWM method. In order to verify the validity, the loss analysis and the implementation results in cases when both the conventional solution using typical MOSFETs with additional FRDs and a new solution using Ultra-FRFETs are applied to a HV-BLU of 40" LCD TV are presented. As a result, the effectiveness of Ultra-FRFET was verified and the results are presented in this paper.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.95-98
• /
• 2006

LCD-BLU (Back Light Unit) is one of kernel parts of LCD unit. The fabrication method of a 3-D micro mold patterned with micro-lenses for the LGP (Light Guiding Plate), one of the most important parts of LCD-BLU, was presented. Instead of dot pattern made by etching, 3-D optical pattern design with $50{\mu}m$ micro-lens was applied in the present study. The micro-lens pattern fabricated by modified LiGA with thermal reflow process was applied to the optical design of LGP. The positive micro-lens patterned injection mold with different aspect ratios (i.e. 0.3 and 0.4) was fabricated with modified LiGA with thermal reflow process. The brightness of LCD-BLU increased as aspect ratio of micro-lens increased.

• Transactions of Materials Processing
• /
• v.16 no.1 s.91
• /
• pp.42-47
• /
• 2007

LCD-BLU is one of kernel parts of LCD and it consists of several optical sheets: LGP, light source and mold frame. The LGP of LCD-BLU is usually manufactured by etching process and forming numerous dots with $50\sim300{\mu}m$ diameter on the surface. But the surface of the etched dots of LGP is very rough due to the characteristics of the etching process during the mold fabrication, so that its light loss is high along with the dispersion of light into the surface. Accordingly, there is a limit in raising the luminance of LCD-BLU. In order to overcome the limit of current etched dot patterned LGP, optical pattern with continuous microlens was designed using optical simulation CAE. Also, a mold with continuous micro-lens was fabricated by UV-LiGA reflow process and applied to 7 inch size of navigator LCD-BLU in the present study.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.451-455
• /
• 2003

최근 LCD제품은 고유한 특장인 경박단소가 요구되면서, 기존의 Back Light Unit(BLU) 로는 대응할 수 없는 사양으로 진화되고 있다. 기존과 동일한 설계개념으로 접근시에 시장에서 요구되는 중량, 두께, 휘도의 사양을 만족시킬 수 없으며, BLU의 주요광원인 CCFL(Cold Cathod Fluorescent Lamp)의 휘도 개선 또 한 한계에 다다르고 있다. 따라서 앞으로의 BLU 의 고성능화는 최적화, 고효율화로의 개발 전개가 예상되며, LCD의 고해상도에 따른 투과율 저하를 보상하기 위한 고품질 BLU의 개발이 시급한 상황이다. 본 연구에서는 이러한 BLU의 고효율화, 고품질화를 달성하기 위한 고성능 도광판 개발과 관련하여, 실물 제작에 앞서 광학시뮬레이션을 통한 이론적 접근을 수행하였다. 연구 결과, 상측에서 정각 $90^{\circ}$ 에 높이 $50{\mu}m$ 하측에서 정각 $80^{\circ}$ 높이 $28{\mu}m$일때 평균조도가 71.52W/m^2 구현됨을 알 수 있다. 이 결과를 바탕으로 통상의 인쇄 방식 도광판에 비해서 약 20% 정도의 휘도향상이 가능함을 알 수 있었다. 또한 차후 본 결과를 바탕으로 한 실물 제작을 통해 설계 시뮬레이션 결과와의 비교를 통해서 정확한 예측이 가능한 시스템을 구현함을 목적으로 하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.75-76
• /
• 2006

LCD-BLU (Liquid Crystal Display - Back Light Unit) is one of kernel parts of LCD unit and it consists of several optical sheets(such as prism, diffuser and protector sheets), LCP (Light Guide Plate), light source (CCFL or LED) and mold frame. The LGP of LCD-BLU is usually manufactured by forming numerous dots with $50{\sim}200{\mu}m$ in diameter on it by erosion method. But the surface of the erosion dots of LGP is very rough due to the characteristics of the erosion process during the mold fabrication, so that its light loss is high along with the dispersion of light into the surface. Accordingly, there is a limit in raising the luminance of LCD-BLU. In order to overcome the limit of current dot patterned LGP, optical pattern design with $50{\mu}m$ micro-lens was applied in the present study. Especially, the negative and positive micro-lens pattern fabricated by modified LiGA with thermal reflow process was applied to the optical design of LGP. The attention was paid to the effects of different pattern conditions to the brightness distribution of BLU with micro-lens patterned LGP. Finally, negative micro-lens patterned LGP showed superior results to the one made by positive in average luminance.

• Proceedings of the Optical Society of Korea Conference
• /
• 2006.07a
• /
• pp.327-328
• /
• 2006

• Journal of KIISE:Computer Systems and Theory
• /
• v.32 no.3
• /
• pp.133-147
• /
• 2005

Various types of ray-tracing methods are used to predict the quantity measures of radiation illumination, the uniformity of illumination, radiation performance of LCD BLU(Hack-Light Unit). The uniformity of radiation illumination is one of the most important design factor of BLU and is usually controlled by the diffusive-ink pattern printed on the bottom of light-guide panel of BLU. Therefore it is desirable to produce an improved (ideally, the optimal) ink pattern to achieve the best uniformity of radiation illumination. In this paper, we applied the Welder-Mead simplex-search method among various direct search method to compute the optimal ink pattern. Direct search methods are widely used to optimize the functions which are often highly nonlinear, unpredictably discontinuous, and nondifferentiable, The ink-pattern controlling the uniformity of radiation illumination is one type of these functions. In this paper, we found that simplex search methods are well suited to computing the optimal diffusive-ink pattern. In extensive numerical testing, we have found the simplex search method to be reasonably efficient and reliable at computing the optimal diffusive-ink pattern. The result also suggests that optimization can improve the functionality of simulation tools which are used to design LCD BLU.

• Transactions of Materials Processing
• /
• v.16 no.1 s.91
• /
• pp.48-53
• /
• 2007

LCD-BLU(Liquid Crystal Display - Back Light Unit) consists of several optical sheets: LGP(Light Guiding Plate), light source and mold frame. The LGP of LCD-BLU is usually manufactured by etching process and forming numerous dots with $50{\mu}m$ in diameter on the surface. But the surface roughness of LGP with etched dots is very high, so there is much loss of light. In order to overcome the limit of current etched dot patterned LGP, optical pattern design with microlens of $50{\mu}m$ diameter was applied in the present study. The microlens pattern fabricated by modified LiGA with thermal reflow process was applied to the optical design of LGP and optical simulation was carried out to know tendency of microlens patterned LGP simultaneously. The attention was paid to the effects of different aspect ratio(i.e. $0.2\sim0.5$) of optical pattern conditions to the brightness distribution of BLU with microlens patterned LGP. Finally, high aspect ratio microlens patterned LGP showed superior results to the one made by low aspect ratio in average luminance.

• The Journal of Korean Physical Therapy
• /
• v.10 no.2
• /
• pp.113-125
• /
• 1998

The neurotropic psudorabies virus(PRV) to replicate within neurons is very useful pathogen for neuronal tracing. I carried out this study to investigate the parametric analysis on the viral infection in the rat circadian control center with two genetically engineered strains out of PRV. The two strains are isogenic with the attenuated Bartha strain of PRV ; in one strain a lacZ reporter gene was inserted into the gC locus (PRV-BaBlu ; $4.75\times10^8pfu/ml$) and the other strain contained a PRV envelope glycoprotein gene(PRV-D ; $2.5\times10^8pfu/ml$) theat is absent in PRV-BaBlu. simultaneous or temporally separated sequential injection of$2{\mu}l$ of each strain into the vetreous body of eye produced a course of transsynaptic infection of retinohypothalamic circuitry. The results were as follows; 1. PRV-BaBlu and PRV-D infected the suprachiasmatic nucleus in hypothalamus and intergeniculate leaflet in lateral geniculate nucleus of thalamus. 2. The rate of PRV infection was dependent upon PRV strain. 3. Pre-infected neurons by PRV-D were interfered with the replication of PRV-BaBlu. 4. Dual injection of PRV-D and PRV-BaBlu showed more virulent than the parental strain.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.339-340
• /
• 2006

Recently, many researches have been done to improve optical performance of LCD-BLU(Back Light Unit). One of the most important parts in LCD-BLU is LGP(Light Guiding Plate). Micro-patterned LGP is known to have different optical characteristics depending on their shape, pattern density and size, etc. In the present study, a micro-optical patterned LGP mold was fabricated using LiGA process. The difference in the optical characteristics between positive and negative patterned LGP's was investigated by fixing the density, location and size of each pattern. It was found that the negative patterned LGP showed better optical characteristics than positive one.