• Journal of the Korean hospital association
• /
• v.30 no.5 s.273
• /
• pp.100-109
• /
• 2001

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.5
• /
• pp.837-846
• /
• 1989

Belt tension distribution for an abrasive blet grinding was investigated analytically and experimentally for (1) slack side and (2) tight side blet grinding. Classical Eytelwein equation was used to predict the belt tension distribution with dividing contact angles into (1) inactive and (2) active angles. General friction theory was modified based on the friction force between the belt and the support in the grinding contact area that was obtained by experiments. It was found that analytical results were in good agreement with the experimental results. Also, the tight side belt grinding was recommended since it could carry out more grinding load than that of slack side belt grinding.

• Journal of the Korean Institute of Gas
• /
• v.24 no.6
• /
• pp.55-60
• /
• 2020

As research and development of eco-friendly vehicles are expanding worldwide, additional devices of vehicles are reduced or deleted to increase the mileage, or research is being conducted to reduce weight. Among them, the multi-stage transmission that was applied to the internal combustion engine vehicle was deleted and replaced with a reducer, and the initial driving power is secured by increasing the torque through the control of the motor output value. However, since frequent motor speed change can result in a load increase, this study attempts to develop a compact and lightweight manual two-stage reducer with a general reducer structure. Therefore, a two-speed transmission with two gear ratio was designed by inserting a large gear and a small gear in a structure with a parallel shaft to connect the gears with a V-belt in the form of a parallel shaft reducer, and setting the gear ratio of the low and high gears respectively. In addition, power performance according to the rotational speed and load of the transmission was checked through a test, and the heat generation characteristics generated during driving were checked to verify the validity of the transmission.

• Proceedings of the ESK Conference
• /
• 1995.10a
• /
• pp.91-100
• /
• 1995

자동차의 안전도는 전통적으로 정면 충돌시 승객의 보호 정도를 가지고 비 교 된다. 그러나 근래에 와서는 다양한 사고에 의한 승객의 피해를 볼 때 정면 과 더불어 측면 충돌시의 피해를 무시할 수 없는 상태에 이르렀다. sled tests 등을 통해서 정면 뿐만 아니라 측면 충돌의 영향도 파악하고 있으나 정면 충돌보다 측면 충돌에 대해 승개 보호 장치의 개발이 미흡한 것이 현실이다. 본 연구에서는 현실적으로 보다 효과적인 occupant (운전자 및 승객) restraint system을 computer 모의 실험을 통해서 제안하고자 하였다. 기존의 안전시스템인 lap/shoulder belt system과 Air cushion에 의한 실험은 다각도로 연구되었다. 그러나 측면 충돌에서 Air Bag에 의한 충돌 감소 영향은 정면 충돌에 비해 적어지게 되어 상체 측면 보호 장치가 필요하게 된다. 본 연구에서는 운전자의 lap/shoulder belt system과 Air Bag에 의해 구속되는 dummy를 가지고 다양한 측면 충돌 각도 (0 .deg. , 15 .deg. , 30 .deg. , 45 .deg. , 70 .deg. )에서 실험이 수행되었다. 또한 각 충돌각에 대해 기존 Restraint System에 상체 측면 보호 장치(seat wing)를 포함하여 실험을 수행 하였다. 이에 대한 각각의 영향, 그리고 승객 손상도 분석 및 평가를 통하여 보안된 측면 충돌 보호 restraint system의 필요성과 그 효과를 제시하고자 한다. 실험결과 에 의하면 정면보다 측면에서 충돌하였을 경우 보조 구속 시스템인 seat wing으로 인 해 측면보호는 물론 occupant는 정면으로 나가게 개선되어 구속 시스템으로써의 이점이 확대되고 shoulder blet 또는 dummy의 감속을 통제하는 Air Bag의 잠재적인 이점이 더욱 확대되었음을 보여주고 있다. 그러나 design 단계에서 편안함, 안락감 등의 문제들과, 다른 실용적인 면에 대한 계속적인 연구가 필요하다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.48 no.6
• /
• pp.33-38
• /
• 2011

In recent years, mobile devices and high-hearth because of the multi-functional, battery usage is increasing. But compared to the required computing power increases the battery's energy capacity of the research is going slowly. In this paper we use the battery discharge characteristics, can be used in battery research and to increase the effective capacity, wireless transmission of power from the system just by turning off the technology to extend battery life is explained. Experimental transmission of images through the standard battery drain intervals according to measuring battery life, and applications used in these experiments and heuristic to optimize battery run time was achieved.

• Journal of the Korea Convergence Society
• /
• v.11 no.4
• /
• pp.63-69
• /
• 2020

This study was conducted to investigate the immediate effects of abdominal pressure blet on limited of stability and gait parameter in patients after stroke. Thirty stroke patients were recruited to measured pre and post wearing the abdominal pressure belt. The assessment measured limited of stability and spatiotemporal gait parameter. This study result were significantly increase in paretic side area, non-paretic side area, forward side area, backward side area (p<.05) and cadence, gait velocity, stride length (p<.05). This study found that abdominal pressure belt had an immediate effect on improving balance and gait function in stroke patients. Future studies require studies of efficient abdominal pressure levels and intervention periods to improve the balance and walking function of stroke patient.

• Proceedings of the KSRS Conference
• /
• v.2
• /
• pp.808-811
• /
• 2006

The KOMPSAT-2 was developed by KARI and it was successfully launched from Plesetsk, Russia on 28th July 2006. The Korean government decided the commercialization of the KOMPSAT-2 image data and direct reception services worldwide. SPOT Image, based in Toulouse (France) was selected by KARI through an international open bidding as a foreign company for the KOMPSAT-2 image promotion over the entire world except the territory of Republic of Korea including the North Korea, the United States of America, UAE, Saudi Arabia, Kuwait, Qatar, Oman, Yemen, Egypt, Iran, Iraq, Jordan, Lebanon, and Syria. KAI (Korea Aerospace Industry Ltd.) is an engaged Korean company for this area. KARI has responsibility to operate the satellite, data acquisition, archiving for the worldwide commercialization. For the processing and delivery of the KOMPSAT-2 image data to the users of KAI and SPOT Image, KAI has the binding contract with KARI. So KAI has the responsibility for the commercial ground station operation such as user support, data processing, and the data delivery. The KOMPSAT-2 ground station is hosted in KARI, so KARI has developed the concept of KOCUST (KOMPSAT-2 Commercial User Support Team) jointly with KAI to support the data processing and delivery as KOMPSAT-2 developer and satellite operator. The main purpose of the KOCUST is to support the operational activities to provide the data and service quality to satisfy customers. KOCUST will be organized by the members of KARI and KAI together. KARI members will mainly take the role of KOCUST coordination, data processing and user support in a public sector. KAI members are going to take user desk, data validation and delivery et cetera, which are related with users. This paper describes a summarized concepts of KOCUST like organization, dedicated tasks of each part and work flow of daily operation.

• Journal of Chest Surgery
• /
• v.36 no.2
• /
• pp.86-90
• /
• 2003

Bulla is an air-filled space within the lung parenchyma resulting from deterioration of the alveolar tissue. Molecular mechanism of the formation of the bulla is not well described. Fibroblast growth factor(FGF)-7, bone morphogenetic protein(BMP) receptor, and transforming growth factor(TGF)-$\beta$ receptor are known to have a stimulatory or inhibitory role in the lung formation. We investigated to see if these growth factor or cytokine receptors are involved in the bulla formation by immunohistochemical staining of bullous lung tissues from patients with primary spontaneous pneumothorax. Material and Method: Bullous lung tissues were obtained from 31 patients with primary spontaneous pneumothorax, including 30 males and 1 female from 15 to 39 years old. The bullous tissues were obtained by video-thoracoscopic surgery and/or mini-thoracotomy and fixed in formalin. Blocks of the specimens were embedded with paraffin and cut into 5-6 ${\mu}{\textrm}{m}$ thick slices. The sections were deparaffinized and hydrated and then incubated with primary antibodies against FGF-7, BMP-RII, or TGF-RII. Result: Of the 31 patients, 24 were TGF-RII positive including 18 strong and 6 weak positives. Observation with high magnification showed that strong immunostaining was detected in the boundary region between bullous and normal lung tissues. In contrast, all of the sections were negative with FGF-7 or BMP-RII antibodies. Conclusion: These results suggest that overexpression of TGF- P RII may be involved in the formation of bulla, although further molecular studies are needed to find out more detailed molecular mechanisms.