• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.298-300
• /
• 2015

Beacon is a signal device, which mainly used to support the safety of the locate and operation of a watercraft and aircraft. Recently, the IT sector BLE (Bluetooth Low Energy) also made possible to operate with less energy over several months using a beacon standards are applied. In addition, the location-based services and technologies using BLE Beacon has attracted attention. However, there is the problem that by using only the position location Beacon devices when high error rate can be measured accurate position. Therefore, in this paper, combines WiFi and Beacon based on Smartphone. Also propose an indoor positioning algorithm reduces the error rate of the position location value.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.270-271
• /
• 2015

Recently, There is Increasing interest in the intelligent services using the Internet of Things indoor positioning technologies that enable the communication of information between the objects. In particular Applications and demand for the indoor location based services using smart devices has made active. An indoor location positioning technology for this purpose BLE (Bluetooth Low Energy) has been a lot of interest in technology increases. If iBeacon of BLE(Bluetooth Low Energy) is made available to provide a signal for the indoor location information measurement then reliability of Indoor location information is lowered by signal interference. In this paper, Proposes a technique for data acquisition method for obtaining reliable position information and reliable position information calculation method from signal information data of iBeacon.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2016.07a
• /
• pp.187-188
• /
• 2016

실내에서 작업자의 위치 정보를 취득하면 사용자의 이동 경로 파악이나 물체의 지역화 및 상황인지 서비스가 가능하다. 최근, BLE(Bluetooth Low Energy) 비콘을 사용하여 작업자의 실내 위치를 파악할 수 있는 여러 가지 연구가 진행되고 있으나 BLE 비콘의 신호세기 강도와 RSSI(Received signal strength indication)의 정확도에 대한 에러율 증가로 인해 실내 작업자 위치 파악 연구에 어려움이 있다. 본 연구에서는 BLE 비콘에서 취득한 RSSI 정보에 대해 PCA, ICA, SVM의 패턴인식 알고리즘을 적용하여 인식정확도를 구하고, 여러 패턴인식 알고리즘 중에서 어떤 알고리즘이 인식정확도 측면에서 적용이 가능한지 제시하였다.

• Journal of KIISE
• /
• v.42 no.8
• /
• pp.979-989
• /
• 2015

Machine to Machine (M2M) technology has gained attention due to the fast diffusion of Internet of Things (IoT) technologies and smart devices. Most wireless network experts believe that Bluetooth Low Energy (BLE) Communications technology in an iBeacon network has amazing advantages in terms of providing communication services at a low cost in smartphone applications. Specifically, BLE does not require any pairing process during its communication phases, so it is possible to send a message to any node without incurring additional transmissions costs if they are within the BLE communication range. However, BLE does not require any security verification during communication, so it has weak security. Therefore, a security authorization process would be necessary to obtain customer confidence. To provide security functions for iBeacon, we think that the iBeacon Message Encryption process and a Decryption (Authorization) process should be designed and implemented. We therefore propose the BLE message Authorization Mechanism based on a One Time Password Algorithm (BLE-OTP). The effectiveness of our mechanism is evaluated by conducting a performance test on an attendance system based on BLE-OTP.

• Journal of the Korea Convergence Society
• /
• v.8 no.1
• /
• pp.7-12
• /
• 2017

In this paper, we proposed an electronic attendance-absence recording system using a smartphone that does not require separate BLE(Bluetooth Low Energy) devices and infrastructure by using BLE advertisement technology of smartphone. The existing BLE-based electronic attendance-absence recording system requires a BEL device to be attached to each classroom for services and a separate technology to identify the devices attached to the classroom. Also, due to the interference with each other, sometimes an error occurred in the electronic connection. In this paper, we propose a system to solve the problems about time, place and cost, which is a disadvantage of the conventional Bluetooth beacon system. BLE advertising function of the smartphone that the user is using without BLE device, it is possible to construct infrastructure for electronic attendance-absence recording system. In order to evaluate the effectiveness of the proposed system, we designed the system structure and operation flow and constructed the system using the smart phone in actual used.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.4
• /
• pp.925-932
• /
• 2015

In this paper, by utilizing the iBeacon is BLE (BlueTooth Low Energy) protocol devices that are supported by over the Bluetooth 4.0, and have implemented a system to improve the accuracy in the system for measuring the position of the user. After measuring through the system according to the state of the iBeacon, the interference factors are analyzed through analysis of the collected data, and applying the extended Kalman filter for calibration. Compared with the data after applying a filter with existing data, it was confirmed an increase in accuracy. Improvement techniques for providing the less complexity to the actual implementation, is effective in improving the accuracy of vulnerable services basic iBeacon.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.352-354
• /
• 2016

Recent with the progress of smart devices, there is an increasing demand for indoor location-based services. For this reason, research on indoor positioning system using a iBeacon techniques added to BLE(Bluetooth Low Energy) specifications of Bluetooth4.0 has been actively. However, RSSI signal used for the measurement of the distance between the iBeacon and the receiving terminal has the problems of inaccurate distance measurement to environmental factors such as obstacles. In this paper, we propose an implemented indoor positioning technique to use filtering technology enhance the reliability of the RSSI signal and the broadcasting signal of the terminal access point function.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.1
• /
• pp.149-152
• /
• 2017

This paper investigated the method for the output of power management IC (PMIC) for BLE beacon with energy harvesting device to be maintained constantly. The capacitor was used to store the energy supplied from energy harvesting device such as solar module and the capacitance was estimated to the optimum value according to the interval for the BLE beacon to send advertising signal.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.05a
• /
• pp.36-37
• /
• 2021

OSC(Off-Site Construction) is regarded as a faster and more economical method in the construction industry, and the attention towards the OSC is growing. In the modular construction process, which is one type of OSC, accurate identification of a module is essential. Because the installation position and the MEP(Mechanical, Electrical, and Plumbing) composition are distinct between modules, a defect in the finishing or junction area is likely to happen during the construction process. This study suggested the modular construction process by applying a beacon receiver using BLE(Bluetooth Low Energy) technology on each module. Construction quality management would be improved using the location and assembly data, particularly for a different module in modular construction.

• Journal of the Korean Society of Mineral and Energy Resources Engineers
• /
• v.55 no.6
• /
• pp.604-613
• /
• 2018

In this study, we analyzed the variations in the received signal strength index (RSSI) measured from Bluetooth beacons based on the strength and propagation direction of Bluetooth low energy (BLE) signal. Using a smartphone, we performed field experiments to investigate RSSI variations in the BLE signal transmitted by non-directional and directional beacons in an amethyst mine. In case of non-directional beacons, as the distance between the Bluetooth beacon and smartphone decreased, the RSSI increases, whereas as the BLE signal strength increased, the RSSI average gradually increased. The mean value of RSSI measured from the directional beacons was changed without relation to the facing angle between the Bluetooth beacon and smartphone. The results of this study can be used as basic data for developing a Bluetooth beacon-based proximity warning system for underground mines.