• The Journal of the Korea Contents Association
• /
• v.12 no.11
• /
• pp.446-457
• /
• 2012

Recently, BIM(Building Information Modeling),which has been an issue in construction work, has been focused on as a new alternative of building industry for way out of crisis by slowing down and decreasing of orders in construction industry. Research for introducing BIM to the architectural field is already proceeding actively at home and abroad. However, civil engineering is so nonrecurring, horizontal, and different from regular construction works that it a large amount of information occurs because of wide range of project, which causes construction firms and design engineers to have some questions whether their initial investment cost would work or not and feel uncomfortable with the cost. In this study, technology level in engineering firms were surveyed for adapting BIM to domestic civil engineering. Development direction of BIM standard information model was drawn through awareness change analysis of BIM in civil engineering, as well. Deduced development direction is composed of guide development, system development, deliverable check and international standard proposal. The outcome will be employed as preliminary data for the study on development of infrastructure BIM standard and deliverable check system in civil engineering.

• Korean Architects
• /
• s.615
• /
• pp.28-31
• /
• 2020

도입까지 시간이 걸릴 것이라고 예측됐던 건설정보모델링(BIM : Building Information Modeling, 이하 BIM)이 어느새 성큼 다양한 분야에 진입했다. 영국, 싱가포르, 미국 등 해외에서는 이미 공공사업 시 BIM을 적극적으로 활용하고 있다. 우리나라 또한 2018년 국토교통부에서 '스마트 건설기술 로드맵'을 마련한 후 공공사업에 BIM을 단계적으로 도입해왔다. 대부분의 발주기관들은 오는 2025년까지 공공사업에 BIM을 전면 도입한다는 계획이다. 성균관대학교 공과대학 건설환경공학부 및 미래도시융합공학과 교수이자 국제건설자동화학회의 종신 상임이사인 권순욱 교수는 '스마트 건설 관리' 연구자이자 국내외에서 활동 중인 CM, BIM의 권위자다. 관련 분야의 책 8권과 100편 이상의 논문을 집필하고 30여 개의 특허·소프트웨어 등록을 보유하고 있다. 텍사스 오스틴 대학교 토목공학 박사 출신으로, 삼성물산, 한국건설기술연구원 등 일반 기업과 국가기관에서 실무와 이론을 두루 경험하며 경력을 쌓았다. 건설연구개발사업, 첨단 융복합 건설기술 등 다수의 국가 건설 R&D에 참여해 초고층 자재, 안전 모니터링, BIM 프로세스 표준개발 등의 시스템을 개발하기도 했다. 해외 연구자들과의 교류에도 적극적이다. 세계 석학들과 '노령 공학' 관련 영문교과서를 공동 집필(스마트주택 챕터 담당)했고, 2016년과 2019년엔 국제건설자동화학회와 국제프로젝트관리학회의 연사 자격으로 강단에 섰다. "영국, 싱가포르 등에선 공공사업을 100% BIM으로 발주하기 시작했습니다. 우리나라 정부도 비슷한 길을 가고 있습니다. 일정 규모의 발주 물량이 안정적으로 나오는 공공기관에서 그렇게 한다는 것은 국가가 전체 패러다임을 바꾸겠다는 의지 아닐까요?" 6월 10일 그의 연구실에서 권순욱 교수를 만나 BIM의 현황과 전망에 대해 들어봤다.

• Journal of KIBIM
• /
• v.1 no.2
• /
• pp.1-5
• /
• 2011

A recent introduction of BIM has raised a necessity for BIM guidelines and guidelines following the decision about the BIM introduction are being present both home and abroad. This study hereby intended to develop BIM guidelines to the architectural field, for which the role and development directives of BIM guidelines were set up based on BIM concepts and examples of foreign guidelines. As a result, the role of guideline in (1)Activation of BIM (2)Support BIM process (3)Support and enhance collaboration (4)Standardized implementation of construction information (5)Technical support for BIM utilizing technology. It also classified the role of each guideline, standard and manual to establish detailed development directives. Besides, regarding the BIM process to clarify the goal to share among participants, information levels per stage and applicable scopes, for the sake of when to introduce BIM and how to use it properly, their contents were suggested in consideration of applicable BIM technologies based on business for each design stage at home.

• Journal of KIBIM
• /
• v.1 no.2
• /
• pp.6-11
• /
• 2011

In domestic construction industry, there is lack of the communication between planning, design, construction and maintenance. This problem makes the omission of information and the loss of cost. Therefore, the introduction of BIM can be a solution about that. BIM manages all information generated during all life-cycle of a structure and consequently maximizes the efficiency of utilizing information. This is done through 3D information model associated with a three-dimensional(3D) parametric CAD. This study proposes the design process of steel box bridge for structural design work of bridge construction project based on BIM. This process has 3D modeling progress done by using the information decided in design phase. When the subject for the proposed process is superstructure of steel box bridge in construction, the structural calculation sheet can be derived with the structural design process based on BIM.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.1
• /
• pp.427-433
• /
• 2024

BIM was activated by applying it necessarily to the government ordered construction of more than a certain amount of money in architecture and construction field of Korea before and after 2010. An architectural education using BIM at college in Korea has been doing in accordance with this trend but is not too different from the existing interior design studio. Also, a new design curriculum based on BIM that provides a digital design concept and a digital working environment is increasingly being demanded in modern society. A digital-based design process is required not only in the field of architecture but also in the field of interior. Therefore, this study suggests the prototype of the interior design studio based on the field practice can apply BIM design, not the unfamiliar interior design studio pursued in the field practice to understand easily the environment of interior design process BIM is essentially seeking.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.4
• /
• pp.129-137
• /
• 2016

BIM libraries for architectural projects have been developed and distributed. However, they do not define physical and logical quality control methods for individual library objects, so there are some difficulties in securing reliability of 3D library models converted from 2D drawings. Because the BIM library contents can be built by participating material and member-fabrication companies, after making individual BIM library objects, a certification process through separate quality verification is very important when delivering as-built BIM libraries. Since the BIM library should have generality for usage, it is necessary to secure the quality of BIM library objects according to consistent verification standards. Therefore, this study suggests a quality verification method for certifying a BIM library object from physical and data perspectives by comparing existing 2D drawings in the BIM libraries built based on standardized 2D drawings from MOLIT. This method could be widely used for quality verification in delivering BIM libraries by companies in the construction sector and operated with rule set data for quality verification of as-built BIM models.

• Proceedings of the Korea Contents Association Conference
• /
• 2012.05a
• /
• pp.425-426
• /
• 2012

최근 건설 분야에서는 3차원 설계로 대표되는 Building Information Model(BIM)에 관련된 연구와 현업적용이 활발히 시도되고 있다. 이런 추세에 맞추어 정부에서는 2013년부터 500억 이상의 공사에 BIM을 적용하기로 결정했다. 따라서 BIM의 핵심이라 할 수 있는 정보모델 관련 소프트웨어의 필요성과 활용의 공감대가 확산되고 있다. 또한 클라우드 컴퓨팅 기술의 보편화에 따른 가상협업환경이 도래하여 BIM 기반의 시설물 정보관리의 보급과 실용적 효과를 높이기 위해 건설과 ICT기술의 융합을 통한 미래 응용기술 연구가 무엇 보다 절실한 시점이다. 이 연구는 클라우드 컴퓨팅을 활용하여 BIM기반 서비스를 제공하기 위한 프로젝트의 전략적 접근방법을 다루고 있다.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.2
• /
• pp.191-198
• /
• 2020

The several smart construction technologies are being introduced to the construction industry, and among these technologies, a few companies are attempting quality control using 3D scanning and BIM. Therefore, in this study, 3D scanning and BIM were applied to cases of on-site quality inspection to confirm the applicability and utility. As a result, it was confirmed that the quality inspection using 3D scanning and BIM was shorter in time than the previously performed quality inspection and can be realized with less manpower. Therefore, it is considered that 3D scanning and BIM-enabled technologies can be applied to various items of quality inspection.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.4
• /
• pp.77-84
• /
• 2018

As the application of BIM (Building Information Modeling) to the civil sector has become practical, and mandatory for road projects, the standardization, development of systems, etc. for the application and operation of BIM are required. In particular, it is important to develop BIM data standards for producing, sharing and managing the lifecycle data of civil facilities because they are commonly national public facilities. The BIM data standards have been developed by utilizing or extending IFC (Industry Foundation Classes), which is an international standard, but schema extensions of river facilities has not been developed thus far. This study proposes an approach to an IFC extension for river facilities using the WBS (Work Breakdown Structure) as a fundamental study for IFC-based schema extension in the river field. For this purpose, the research was carried out as follows. First, the IFC extension development method was selected to represent the river facilities by analyzing the existing IFC structure and previous research cases for the IFC extension. Second, extended elements of the river facilities were identified through an analysis of the WBS and classified according to the high-level structure of the IFC schema. Third, the classified elements were arranged based on the IFC hierarchy and the IFC schema extension for river facilities was established. Based on the suggested extension method of IFC schema, this study developed the schema by defining the element components and parts of river facilities, such as distribution flow elements and deriving their detailed types and properties.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.14 no.4
• /
• pp.437-451
• /
• 2012

Application of 3D laser scanner to civil engineering is widely studied in various fields such as tunnel, bridge, calculation of earth volume, construction measurement, observation of rock joint, etc. Some studies on utilization of the 3D laser scanner for calculating the over-break and/or under-break of tunnels have also been carried out. However, in the previous research, the scanning data were usually compared with the 2D CAD blueprint results; although the shape of tunnel structure is relatively simple, for precise calculation of the over-break and/or under-break of tunnels, three-dimensional analysis based on BIM is needed. Therefore, in this paper, a new program that calculates the over-break and/or under-break of tunnels using the 3D laser scanner and the BIM is developed; moreover the effective and rapid process of data treatment is proposed. The accuracy of the developed program was verified by applying the new system to a real tunnels construction field.