• Journal of the Institute of Convergence Signal Processing
• /
• v.2 no.4
• /
• pp.1-8
• /
• 2001

In this paper we propose high performance system with reduced hardware architecture to convert a color tone. Conversion for the color tone of a input image is necessary to calculate the color temperature of the image Conventional way of calculating the temperature uses algorithm using the method calculating 2-D chromaticity coordinates. But it requires bulky hardware[1]. This paper propose the color temperature calculation method about 1-D chromaticity coordinates that reduces the hardware complexity while keeping the performance of the 2-D color temperature algorithm . The proposed method is verified by fLCD-TV system using the Xilinx Virtex FPGA XCV 2000E-6BG560 that has 1344*806 resolution and requires a high-speed 65MHz operation.

• YAKHAK HOEJI
• /
• v.49 no.6
• /
• pp.490-494
• /
• 2005

The objective of this study is to provide the basic information for developing a high-value ginseng product using ginseng saponin and prosapogenin. In order to achieve such aim, Ginsenoside compositions of black ginseng (BG) extracts with various solvent conditions were examined by HPLC. The total saponin and the prosapogenin content of 95$\%$ ethyl alcohol extract were higher than that of the either 50$\%$ ethyl alcohol extract or distilled water extract. As a result, the order of the total saponin and the prosapogenin content was 1) 95$\%$ ethyl alcohol,2) 50$\%$ ethyl alcohol,3) the first and second mixture of 95$\%$ ethyl alcohol, distilled water, and 4) distilled water extract. In the case of fine black ginseng (FBG), the first and second mixture extracts of 95$\%$ ethyl alcohol and distilled water were the highest. In addition, the ratio of the protopanaxadiol group and the protopanaxatriol group (PD/PT) showed that the ratio of BG ranged from 0.304 to 0.601, while the ratio of FBG ranged from 1.166 to 1.657.

• Transactions of the Korean hydrogen and new energy society
• /
• v.22 no.5
• /
• pp.663-670
• /
• 2011

Under a daily photoperiod of 14h light and 10h dark synchronization of cell cycle in Korean Cyanothece spp. strains and $Synechococcus$ sp. strain Miami BG043511 was analyzed as to be applicable to enhanced hydrogen production. For all strains peaks of double cell were observed during the light period of a daily cycle. Peaks of maximal cell size measured by a coulter counter appeared at the peak of double cells observed under light microscope reconfirming the synchronization of daily cell cycle. The cell cycle synchronization became weakened within two days when treated with continuous illumination. Rapid detection of the peak time of double cell percentage by coulter counters may contribute to quasi-realtime feedback control for efficient production of photobiological hydrogen by unicellular cyanobacterial strains.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.43 no.5
• /
• pp.753-767
• /
• 2019

Dyeing behavior of indigo leaf powder was examined in regards to the effect of the amount of pigments on color and dye adsorption for silk dyed by reduction and nonreduction dyeing. The amount of indigotin and indirubin pigments adsorbed in dyed silk was examined by HPLC-DAD analysis. The color of dyed silk showed 7.7BG - 2.7B hue when silk was dyed at $50^{\circ}C$, and 3.5G - 4.9BG when dyed at $70^{\circ}C$. Blue ($b^*$) and green ($a^*$) color decreased as the pH of dyebath increased. When silk was dyed using nonreduction, R (red) and RP (red purple) hue and R hue was more apparent in samples dyed at $90^{\circ}C$. In reduction dyeing, amount of indigotin detected from silk exceeded the amount that was initially contained in the input dye. The amount of indirubin was lower than indirubin that was initially in the powder. In nonreduction dyeing, silk showed a higher amount of indirubin adsorption compared to silk dyed by reduction. The amount of indigotin adsorbed in silk was lower than the amount initially contained in the input dye. The amount of indigotin and indirubin adsorption was primarily dependent upon the dyeing method-reduction or nonreduction along with dyeing temperature and the pH of dyebath.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.22 no.5
• /
• pp.674-686
• /
• 2019

In this paper, we will discuss the absolute angular error control mode for the Gun/Turret driving system. The Gun/Turret driving controller receives absolute angular error calculated from the fire control system (FCS). Thus, the Gun/Turret driving controller is subjected to step command to cause residual vibration and system unstable. In order to reduce residual vibration and to ensure the system stability, we propose an error motion profile method with two types of trapezoidal and S-Curve. The validity of the proposed error motion profile method is confirmed via simulation by observing that the resulting position error, driving power, and power density satisfied the control performance.

• The Journal of Advanced Prosthodontics
• /
• v.13 no.1
• /
• pp.65-70
• /
• 2021

Purpose. Implant mechanical complications, including screw loosening, can influence dental implant success. It has been shown that torque values are affected by contamination occurred in implant-abutment (I/A) interface. This study aimed to examine the effects of blood, saliva, fluoride and chlorhexidine contamination on reverse torque values (RTVs) of abutment screws in oral conditions. Materials and Methods. 50 fixtures were mounted into the stainless-steel holders and divided into five groups (n = 10). Except control group (NC), fixture screw holes in other groups were contaminated with chlorhexidine (CG), saliva (SG), blood (BG), or fluoride (FG). Abutment screws were tightened with a digital torque meter. I/A assemblies were subjected to thermocycling and cyclic loading. The mean RTVs were recorded and data were analyzed with one-way ANOVA and Tukey test. Results. Except for specimens in SG (20.56 ± 1.33), other specimens in BG (21.11 ± 1.54), CG (22.89 ± 1.1) and FG (24.00 ± 1.12) displayed significantly higher RTVs compared to NC (19.00 ± 1.87). The highest RTVs were detected in CG and FG. Conclusion. The obtained data robustly suggest that RTVs were significantly affected by fluid contaminations. Specimens in FG and CG displayed the highest RTVs. Therefore, clinicians should have enough knowledge about probable contaminations in I/A interface in order to manage them during clinical procedure and to inform patients about using oral care products.

• ETRI Journal
• /
• v.45 no.1
• /
• pp.7-17
• /
• 2023

The error-rate floor of low-density parity-check (LDPC) codes is attributed to the trapping sets of their Tanner graphs. Among them, fully absorbing sets dominantly affect the error-rate performance, especially for short blocklengths. Efficient methods to identify the dominant trapping sets of LDPC codes were thoroughly researched as exhaustively searching them is NP-hard. However, the existing methods are ineffective for Raptor-like LDPC codes, which have many types of trapping sets. An effective method to identify dominant fully absorbing sets of Raptor-like LDPC codes is proposed. The search space of the proposed algorithm is optimized into the Tanner subgraphs of the codes to afford time-efficiency and search-effectiveness. For 5G New Radio (NR) base graph (BG) 2 LDPC codes for short blocklengths, the proposed algorithm finds more dominant fully absorbing sets within one seventh of the computation time of the existing search algorithm, and its search-effectiveness is verified using importance sampling. The proposed method is also applied to 5G NR BG1 LDPC code and Advanced Television Systems Committee 3.0 type A LDPC code for large blocklengths.

• The Journal of the Society of Stroke on Korean Medicine
• /
• v.6 no.1
• /
• pp.63-68
• /
• 2005

Objective: The purpose of this case study is to show a case of early neurological recovery from stroke by recannalization. Methods: The patient was admitted from 12 July, 2004 to 26 July, 2004. The patient received Herb-Medication and Acupuncture Therapy. Brain MRI and Tc-99m HM-PAO brain SPECT was used to diagnose and prognose. Results: The patient fully recovered within a few hours. She was diagnosed as acute infarction in Lt. BG by using brain MRI. Tc-99m HM-PAO brain SPECT showed focal increased perfusion at Lt. BG. Conclusions: We suggest that the important thing to recovery from stroke is recannalization of cerebral arteries in early stage.

• The Korean Journal of Food And Nutrition
• /
• v.29 no.2
• /
• pp.145-152
• /
• 2016

This study investigated the changes in chemical components, antioxidant compounds, and activity before (BG) and after germinated (AG) brown rice in order to promote the availability of these beneficial factors. The GABA content of BG and AG brown rice were 0.07~6.61 and 11.13~49.72 mg/100 g, respectively. The ${\alpha}$-amylase activity of AG brown rice was 1.77~70.25 unit/g fold higher than it was in BG brown rice. Total polyphenol and flavonoid contents, which are known to be related to antioxidation, were higher in BG brown rice than in AG brown rice. The total polyphenol contents of BG and AG brown rice were 10.52~36.38 and 11.38~26.33 mg/100 g, and the total flavonoid contents were 3.55~13.39 and 3.52~9.78 mg/100 g, respectively. Also, DPPH radical scavenging activity was 57.64~251.34 and 50.49~213.35 mg TE/100 g, respectively. ABTS radical scavenging activity and total tannin content showed a similar trend to DPPH radical scavenging activity. We expect that this data will be useful in the manufacturing of food products.

• Journal of the Korean Society of Radiology
• /
• v.15 no.6
• /
• pp.803-811
• /
• 2021

In this study, the exposure amount of IASCC test worker was evaluated by applying the process simulation technology. Using DELMIA Version 5, a commercial process simulation code, IASCC test facility, hot cells, and workers were prepared, and IASCC test activities were implemented, and the cumulative exposure of workers passing through the dose-distributed space could be evaluated through user coding. In order to simulate behavior of workers, human manikins with a degree of freedom of 200 or more imitating the human musculoskeletal system were applied. In order to calculate the worker's exposure, the coordinates, start time, and retention period for each posture were extracted by accessing the sub-information of the human manikin task, and the cumulative exposure was calculated by multiplying the spatial dose value by the posture retention time. The spatial dose for the exposure evaluation was calculated using MCNP6 Version 1.0, and the calculated spatial dose was embedded into the process simulation domain. As a result of comparing and analyzing the results of exposure evaluation by process simulation and typical exposure evaluation, the annual exposure to daily test work in the regular entrance was predicted at similar levels, 0.388 mSv/year and 1.334 mSv/year, respectively. Exposure assessment was also performed on special tasks performed in areas with high spatial doses, and tasks with high exposure could be easily identified, and work improvement plans could be derived intuitively through human manikin posture and spatial dose visualization of the tasks.