• Journal of Animal Science and Technology
• /
• 제65권3호
• /
• pp.596-610
• /
• 2023

Focusing high marble deposition, Hanwoo feedlot system uses high-energy diet over the prolonged fattening period. However, due to the individual genetic variation, around 40% of them are graded into inferior quality grades (QG), despite they utilized the same resources. Therefore, focusing on development of a nutrigenomic based precision management model, this study was to evaluated the response to the divergent selection on genetic merit for marbling score (MS), under different dietary total digestible nutrient (TDN) levels. Total of 111 calves were genotyped and initially grouped according to estimated breeding value (high and low) for marbling score (MS-EBV). Subsequently, managed under two levels of feed TDN%, over the calf period, early, middle, and final fattening periods following 2 × 2 factorial arrangement. Carcasses were evaluated for MS, Back fat thickness (BFT) and Korean beef quality grading standard. As the direct response to the selection was significant, the results confirmed the importance of initial genetic grouping of Hanwoo steers for MS-EBV. However, dietary TDN level did not show an effect (p > 0.05) on the MS. Furthermore, no genetic-by-nutrition interaction for MS (p > 0.05) was also observed. The present results showed no correlation response on BFT (p > 0.05), which indicates that the selection based on MS-EBV can be used to enhance the MS without undesirable effect on BFT. Ultimate turnover of the Hanwoo feedlot operation is primarily determined by the QGs. The present model shows that the initial grouping for MS-EBV increased the proportion of carcasses graded for higher QGs (QG1⁺⁺ and QG1⁺) by approximately 20%. Moreover, there appear to be a potential to increase the proportion of QG 1⁺⁺ animals among the high-genetic group by further increasing the dietary energy content. Overall, this precision management strategy suggests the importance of adopting an MS based initial genetic grouping system for Hanwoo steers with a subsequent divergent management based on dietary energy level.

• Journal of Animal Science and Technology
• /
• 제66권1호
• /
• pp.135-144
• /
• 2024

The objective of this study was to investigate the influence of feeding frequency on a sow's reproductive performance and stress response during gestation. A total of twenty multiparous sows (Yorkshire × Landrace) were used in a completely randomized design based on their parity, body weight (BW), and backfat thickness (BFT), and the sows were allotted to two different feeding systems: 1) once daily feeding (OF) and 2) twice daily feeding (TF) in corn-soybean meal based diets. The gestation diet was formulated to contain 3,265 kcal of metabolizable energy (ME) / kg, 12.90% of crude protein (CP), and 0.75 % of total lysine. The lactation diet was formulated to contain 3,265 kcal of ME / kg, 16.80% of CP, and 1.08% of total lysine and provided ad libitum during lactation. In gestation, sow BFT and BF changes were not affected by feeding frequency, but higher BW and BW gain from day 35 to 90 and day 35 to 110 were observed in OF sow (p < 0.10). In lactation, feeding frequency did not influence on BW, BW gain, BFT, BF changes, average daily feed intake, and wean-to-estrus interval. Also, there were no differences in litter size, litter weight and piglet weight in lactating sows. OF sows had higher (p < 0.05; p < 0.10) protein, solid-not-fat, and total solid concentrations in colostrum compared to TF sows, while OF sows had a lower (p < 0.05) lactose concentration in colostrum compared to TF sows. Sows in OF showed significantly lower average daily water consumption (ADWC) from day 35 to 110 of gestation (p < 0.05). While there were no significant differences in stereotypic behaviors and salivary cortisol levels during gestation between treatments, the OF sows showed less time spending on the activity at day 105 (p < 0.05). In conclusion, reduced feeding frequency increased BW gain during gestation, decreased activation time, and changed the colostrum composition. This information may contribute to the understanding of the physiological and behavioral change of gestating sows by manipulating feeding frequency.

• 산업기술연구
• /
• 제17권
• /
• pp.331-338
• /
• 1997

In this paper, we propose a new neural pattern recognition from wavelet transform. We first analysis in BFT(Binary Field Transform) in character image. The proposed neural network and wavelet transform is able to improve learning time and scaling. The ability and effectiveness of identifying image using the proposed wavelet transform will be demonstrated by computer simulation.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(1)
• /
• pp.141-144
• /
• 2002

본 논문은 2세대 규격인 IS-95와 3세대 규격인 W-CDMA 혼용 디지털 채널화기 구조에 대한 제안 및 동작원리를 기술하고 성능을 분석한다. 실제적인 1.25MHz 대역폭을 갖는 IS-95와 SMHe의 대역폭을 갖는 W-CDMA 혼용 디지털 채널화기를 위한 BFT 필터 뱅크 적용시의 문제점을 지적하고 혼용 디지털 채널화기의 구조로 별도의 정류자를 사용하는 폴리페이즈 필터 뱅크 구조를 제안하고 성능을 분석한다.

• 농업과학연구
• /
• 제45권1호
• /
• pp.66-73
• /
• 2018

Hanwoo is an important livestock resource in Korea. Its genetic improvements of economic traits have mainly focused on the steers in the past. However, there is a great necessity to extend the breed improvement programs to the cows as well. Therefore, the objective of this study was to investigate the effects of various environmental factors (person taking the measurement, region, year of measurement, month of measurement, image interpreter, birth-year and birth-year) on ultrasound measured carcass traits. A total of 27,215 ultrasound measurements of carcass traits were recorded between 2004 and 2012 for 22,620 cows born from 1997 to 2011. The ultrasound measures included backfat thickness (BFT), eye muscle area (EMA), and marbling score (MAR). The mean values for the BFT, EMA and MAR were 4.46 mm, $56.24cm^2$, and 4.12 point, respectively. Seven environmental factors, person taking the measurement, region, year of measurement, month of measurement, image interpreter, birth-year and birth-month, were tested to determine if they had a significant effect on the studied traits using the GLM procedure in SAS. All factors were found to significantly affect all the ultrasound carcass traits in this study. Unlike in previous studies, among the environmental effects, the significant effect of the image interpreter on the ultrasound carcass traits was shown for the first time in this study. These results indicate that future genetic evaluations of ultrasound carcass traits of Hanwoo cows should include all of the above environmental factors as well as the effect from people taking the measurements.

• 농업과학연구
• /
• 제44권4호
• /
• pp.519-524
• /
• 2017

The present study investigated the impacts of mating age of gilts (A1, < 230 days; A2, 230 - 249 days and A3, $250{\leq}days$) on reproductive performance and litter size of sows at farrowing to weaning. A total of 102 crossbred gilts ($Yorkshire{\times}Landrace$; average days old, 90 days) were purchased from a commercial breeding company. After identification of third estrus, the gilts were artificially inseminated using semen of Duroc boars. Pregnant pigs were allotted to one of three groups including A1, A2, and A3. Experimental diets and water were fed ad libitum during each experimental period which included the first, second, and third parities. Backfat thickness (BFT) of sows was higher in A3 at farrowing in the first parity than in others. At weaning time in the second parity, sows in A3 group showed a numerically higher BFT than those in A1. There was no effect of mating age on the total number of piglets born and total weaned piglets. There was a tendency to decrease the wean-to estrus-interval in the first parity as age increased at mating. Results obtained in the present study indicate that the first mating age does not affect the subsequent parites' reproductive performance; however, weaned to estrus interval tended to decrease in A2 at the first parity.

• Journal of Animal Science and Technology
• /
• 제53권3호
• /
• pp.211-222
• /
• 2011

The present review was aimed to assess the feasibility of increasing the slaughter weight (SW) of finishing pigs. Growth performance, including ADG, ADFI and gain:feed, does not change significantly with increasing SW between 110 and $135{\pm}5kg$ in lean-genotype pigs, whereas in non-lean pigs, ADG and gain:feed decrease with increasing SW within the similar range of BW. Backfat thickness (BFT) and marbling of the carcass, which are greater in barrows than in gilts, increase with the increase of SW. The SW could be increased by using a low-energy diet and thereby reducing the rate of fat deposition per weight gain. The yield of the belly increases with the increase of SW, which may be economically significant in Korea. However, yields of some other primal cuts do not change so much as to affect the carcass value. The redness and fat content of the muscle increase slightly with the increase of SW whereas moisture content is minimally influenced by SW. Muscular protein content rarely changes, but sometimes increases slightly, with increasing SW. Other physicochemical characteristics, including lightness, pH, drip loss, and cooking loss of the muscle, are barely influenced by SW. Marbling of fresh loin and ham increases with increasing SW. Sensory characteristics of fresh loin, ham, and belly, including color, aroma, off-flavor, drip, and acceptability, are not influenced significantly by SW. The eating quality of cooked pork also has almost no relation to SW. In conclusion, it is thought that the current SW for moderately lean barrows and gilts can be raised up to 125 and 135 kg, respectively, with BFT at these weights predicted to be approximately 24 mm near the last rib, without compromising the meat quality.

• Asian-Australasian Journal of Animal Sciences
• /
• 제25권1호
• /
• pp.17-21
• /
• 2012

The purpose of this study was to improve mapping power and resolution for the QTL influencing carcass quality in Hanwoo, which was previously detected on the bovine chromosome (BTA) 6. A sample of 427 steers were chosen, which were the progeny from 45 Korean proven sires in the Hanwoo Improvement Center, Seosan, Korea. The samples were genotyped with the set of 2,535 SNPs on BTA6 that were imbedded in the Illumina bovine 50 k chip. A linkage disequilibrium variance component mapping (LDVCM) method, which exploited both linkage between sires and their steers and population-wide linkage disequilibrium, was applied to detect QTL for four carcass quality traits. Fifteen QTL were detected at 0.1% comparison-wise level, for which five, three, five, and two QTL were associated with carcass weight (CWT), backfat thickness (BFT), longissimus dorsi muscle area (LMA), and marbling score (Marb), respectively. The number of QTL was greater compared with our previous results, in which twelve QTL for carcass quality were detected on the BTA6 in the same population by applying other linkage disequilibrium mapping approaches. One QTL for LMA was detected on the distal region (110,285,672 to 110,633,096 bp) with the most significant evidence for linkage (p< $10^{-5}$). Another QTL that was detected on the proximal region (33,596,515 to 33,897,434 bp) was pleiotrophic, i.e. influencing CWT, BFT, and LMA. Our results suggest that the LDVCM is a good alternative method for QTL fine-mapping in detection and characterization of QTL.

• Asian-Australasian Journal of Animal Sciences
• /
• 제15권7호
• /
• pp.932-937
• /
• 2002

A partial genome scan using porcine microsatellites was carried out to detect quantitative trait loci (QTL) for backfat thickness (BFT) in a pig reference population. This population carried QTL on chromosomes 1, 13 and 18. The QTL on chromosome 1 was located between marker loci S0113 and SW1301. The QTL corresponded to very low density lipoprotein receptor gene (VLDLR) in location and in biological effects, suggesting that VLDLR might be a candidate gene. The QTL found on chromosome 13 was found between marker loci SWR1941 and SW864, but significance for the marker-trait association was inconsistent by using data with different generations. The QTL on chromosome 18 was discovered between markers S0062 and S0117, and it was in proximity of the regions where IGFBP3 and GHRHR were located. The porcine obese gene might be also a candidate gene for the QTL on chromosome 18. In order to understand genetic architecture of BFT better, fine mapping and positional comparative candidate gene analyses are necessary.

• Asian-Australasian Journal of Animal Sciences
• /
• 제27권10호
• /
• pp.1387-1393
• /
• 2014

This study aimed to estimate genetic correlation between carcass grading and retail productivity traits and to estimate the correlated response on retail productivity traits through selection for carcass grading traits in order to assess the efficacy of indirect selection. Genetic parameters were estimated with the data from 4240 Hanwoo steers using mixed models, and phenotypes included carcass weight (CWT), back fat thickness (BFT), eye muscle area (EMA), marbling (MAR), and estimated lean yield percentage (ELP) as the carcass grading traits, and weight and portion of retail cuts (RCW and RCP), trimmed fats (TFW and TFP) and trimmed bones (TBW and TBP) as the lean productivity traits. The CWT had positive genetic correlations with RCW (0.95) and TFW (0.73), but its genetic correlation with RCP was negligible (0.02). The BFT was negatively correlated with RCP (-0.63), but positively correlated with TFW and TFP (0.77 and 0.70). Genetic correlations of MAR with TFW and TFP were low. Among the carcass grading traits, only EMA was positively correlated with both RCW (0.60) and RCP (0.72). The EMA had a relatively strong negative genetic correlation with TFW (-0.64). The genetic correlation coefficients of ELP with RCP, TFW, and TFP were 0.76, -0.90, and -0.82, respectively. These correlation coefficients suggested that the ELP and EMA might be favorable traits in regulating lean productivity of carcass.