• The Journal of the Acoustical Society of Korea
• /
• v.22 no.5
• /
• pp.418-424
• /
• 2003

In this paper we analyzed the performance of data transmission using BFSK modulation. The system performances were evaluated by the experiments in water tank. As a result we showed the influences of reverberation due to the multipath. In order to simplify the experiment procedure the channel coding etc. were omitted. The experimental result shows that the maximum transmission data rate in used water tank is about 800 bps. We also verified that the reverberation effect m reduced using a deconvolution with a measured channel impulse response. This method improved the bit rate by about 100 bps than simple noncoherent demodulator at bit error rate of 10/sup -3/.

• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.405-408
• /
• 2001

In this paper, we design tracking filter that get frequency range from 30 to 88 ［MHz］ for FH/BFSK communication system. This filter use for switching componet BJT. as result, This tracking filter has a insertion loss of 0.77~1.93［dB］. And it has a cutoff characteristic 30/3［dB］ shape factor of 3.9~6.2［dB］. The tracking filter satisfy its specification

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.8
• /
• pp.837-845
• /
• 1992

This paper shows the performance of FH /BFSK communication systems under worst case Jamming interference. The channel Is modeled with ratio-threshold technique, and as a lamming signal the tone Jamming and Gaussian Jamming are used. The performance is analyzed by using the channel capacity which is the code rate and bit signal-to-Jammer ratio, and we show that the performance degration becomes large as background noise Is big and obtain the best performance when the threshold level f is about 1.5.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.8
• /
• pp.1161-1168
• /
• 2002

In this paper, the throughput performance of an ARQ scheme is analyzed with noisy feedback channel, in order to exactly analysis for performance of an ARQ scheme. An ARQ mechanism is presented by state diagram, and the throughput of an ARQ scheme is mathematically derived using generation function for a signal flow graph. The channel is modeled by the Nakagami-m fading channel which is distributed over far and wide, and the throughput performance of an ARQ scheme, which is applied in BPSK and BFSK systems, according to feedback gain and fading index m is analyzed through computer simulation. In the results, It is shown conformed that the throughput of an ARQ scheme decreased according to the increase of the noise for feedback channel, but it increased according to the increase of the feedback gain and fading index m. Also, it is shown that the throughput of an ARQ scheme using BPSK system is superior to BFSK system because of the difference of bit error probability between BPSK and BFSK systems.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1999.05a
• /
• pp.280-285
• /
• 1999

In this paper, we have analyzed a performance of fast frequency hopping communication systems when a rayleigh fading caused by envelope variations of a signal received in multipath channel is, but it is not considered that intentional or unintentional jamming can be. The multipath fading channel and rayleigh fading are confirmed by theoretical analysis. In fading or non-fading, the performance of this system is studied. When the path diversity is applied to this system, the performance is shown to be superior to non-diversity systems about 20dB. for modulation methods, BFSK was compared with DPSK.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.3
• /
• pp.429-436
• /
• 2000

In this paper, the performance of a orthogonal noncoherent FH-BFSK communication system in the presence of partial band noise jamming is analyzed. Also bit error rate(BER) is studied when jamming bandwidth ratio to overall spread spectrum bandwidth,$\rho$, changes according to processing gain(PG). The performance is investigated by numerical analysis and computer simulation of SPW. Even if PG is high, required performance could not gain because error floor occurs when JSR is 10 dB and SNR is under 10 dB. PG can be obtained to acquire a required BER according to $\rho$ when SNR is above 12 dB.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.8
• /
• pp.1492-1499
• /
• 2015

In this paper, we propose a clipping method for LDPC coded FH BFSK system over partial-band jamming channel. We apply the erasure insertion technique, which had been studied much earlier, now to LDPC codes and discuss its performance degradation region. By using clipping technique, the performance degradation can be removed. Finally, we discuss the erasure insertion and clipping techniques for various jamming conditions.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.3
• /
• pp.579-586
• /
• 1999

In this paper, we have analyzed a performance of fast frequency hopping communication systems when a rayleigh fading caused by envelope variations of a signal received in multipath channel is, but it is not considered that intentional or unintentional jamming can be. The multipath fading channel and rayleigh fading are confirmed by theoretical analysis. In fading or non-fading, the performance of this system is studied. When the path diversity is applied to this system, the performance is shown to be superior to non-diversity systems about 20dB. For modulation methods, BFSK was compared with DPSK.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.6
• /
• pp.1243-1249
• /
• 2004

In this paper, the multipath effect on underwater acoustic channel bandwidth and BFSK and BPSK bit error dependancy on channel bandwidth are analyzed. The multipath is modeled as a discrete multipath and a continuous multipath and the channel bandwidth is expressed as a function of multipath delay spread constant. Bit error characteristics on the channel bandwidth and the criteria of the multipath delay spread constant are found through the numerical simulation. The transmission bit rate of less than 100bps in the water tank which has a channel bandwidth of 100Hz, is a consistent result with the numerical simulation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.8
• /
• pp.1488-1494
• /
• 2008

This paper is to design and implement a low power noncoherent BFSK receiver intended for future deep space communication using Xilinx System generator. The receiver incorporates a 16 point Fast Fourier Transform(FFT) for symbol detection. The design units of the receiver are digital design for better efficiency and reliability. The receiver functions on one bit data processing and supports main data rate 10kbps. In addition CORDIC algorithm is used for avoiding complex multiplications while computing FFT and multiplication of twiddle factor for low power is substituted by rotators. The design and simulation of the receiver is carried out in Simulink then the Simulink model is translated to the hardware model to implement FPGA using Xilinx System Generator and to verify performance.