• 자원리싸이클링
• /
• 제19권3호
• /
• pp.33-44
• /
• 2010

본 연구에서는 아세틸렌가스 제조 공정에서 배출되어 나오는 부산소석회에 대한 고로수쇄슬래그의 알칼리 활성화제로서의 활용 가능성을 조사하고자 하였다. 부산소석회의 물리 화학적 분석을 실시하였으며, 알칼리 활성화제로서의 특성분석을 위하여 세 가지 형태로 부산소석회를 사용하였다. 부산소석회는 고로수쇄슬래그에 0, 10, 20, 30 wt.% 첨가하였으며, 소석회가 혼합된 고로수쇄슬래그를 보통포틀랜드시멘트에 0, 10, 30, 50 wt.%첨가하여 수화 및 물리적 특성을 조사하였다. 수화특성 분석결과 $800^{\circ}C$에서 열처리 후 재수화 시킨 소석회를 사용한 경우 다른 시료들 보다 높은 수화율을 보였다. 압축강도실험결과 325 mesh 이하크기의 부산소석회와 열처리 후 재수화시킨 소석회를 사용한 경우 수화 7일부터 OPC 보다 높은 강도 값을 나타내었으며, 325 mesh 이하크기 부산소석회를 활성화재로 사용한 OPC50 wt.%-BFS 45 wt.%-AA5 wt.%계에서 가장 높은 압축강도를 보였다.

• 한국결정성장학회지
• /
• 제29권2호
• /
• pp.61-70
• /
• 2019

Geopolymer는 시멘트와 비교하여 $CO_2$ 배출량의 감소, 내화성, 낮은 열전도성 등 다양한 장점을 보유하고 있는 eco-friendly 건설재료이다. 그러나 표면에 화염을 가할 경우 geopolymer panel 표면의 열적거동에 대한 연구결과는 많지 않다. 본 연구에서는 내열성 건축자재로서 화염노출시 geopolymer 경화체의 표면특성을 조사하기 위하여 alumina 골재가 사용된 geopolymer 경화체 표면의 화염노출 특성에 대하여 조사하였다. 화염노출시 panel의 외형변형 및 열충격에 의한 크랙은 없었으며, calcite의 잔존량과 aluminosilicate gel의 halo 패턴으로 보아 화염에 의한 탈탄산 및 탈수는 표면에 국한되어 발생했으며, geopolymer 경화체의 내구성은 화염조사 후에도 유지되고 있는 것으로 판단된다. Quartz와 calcite가 감소함에 따라 gehlenite와 calcium silicate가 증가하는 경향을 나타내고 있으며, BFS의 치환량이 많을수록 현저하게 나타난다. 화염노출에 따른 미세구조의 변화는 탈탄산, 결정수의 탈수 등으로 기공의 형성과 발전되는 과정을 거쳐 calcium silicate, gehlenite 등과 같은 새로운 결정상의 형성에 의해 geopolymer panel 표면의 치밀화와 강화기구로 작용하여 내구성이 향상된 것으로 생각된다.

• Corrosion Science and Technology
• /
• 제6권4호
• /
• pp.177-185
• /
• 2007

The purpose of this study is to evaluate freezing-thawing and surface scaling resistance in order to examine the frost durability of concrete in a chloride-inherent environment. The mixing design for this study is as follows: 3 water binder ratios of 0.37, 0.42, and 0.47; 2-ingredient type concrete (50% OPC concrete and 50% ground granulated blast-furnace slag), and 3-ingredient type concrete (50% OPC concrete, 15% fly ash, and 35% ground granulated blast-furnace slag). As found in this study, the decrease of durability was much more noticeable in combined deterioration through both salt damage and frost damage than in a single deterioration through either ofthese; when using blast-furnace slag in freezing-thawing seawater, the frost durability and surface deterioration resistance was evaluated as higher than when using OPC concrete. BF 50% concrete, especially, rather than BFS35%+FA15%, had a notable effect on resistance to chloride penetration and freezing/expansion. It has been confirmed that surface deterioration can be evaluated through a quantitative analysis of scaling, calculated from concrete's underwater weight and surface-dry weight as affected by the freezing-thawing of seawater.

• 한국세라믹학회지
• /
• 제46권1호
• /
• pp.58-68
• /
• 2009

In this study, rheological properties of ternary system cement containing ground fly ash(F3, Blaine specific surface area $8,100\;cm^2/g$) were investigated using mini slump, coaxial cylinder viscometer and conduction calorimeter. In the results, the segregation resistance was observed at high W/B and PC area while the replacement ratio of F3 was increasing. The 2:5:3 system was shown in higher fluidity and lower hydration heat than 3:4:3 system. The segregation range of cement pastes occurred over 175 mm in average diameter by mini slump and below $10\;dynesec/cm^2$ of the plastic viscosity or below 50 cP of the yield stress by coaxial cylinder viscometer. It was observed that even if BFS and FA blended together admixture properties would remaine as they were separately. The properties of admixture would not be changed. On the above results, the decreased replacement ratio of OPC and increased replacement ratio of admixtures would be possible.

• International Journal of Concrete Structures and Materials
• /
• 제10권4호
• /
• pp.527-537
• /
• 2016

This study evaluated the mechanical characteristics and durability of porous concrete produced with a cementless binder based on ground granulated blast furnace slag (BFS), fly ash (FA) and flue gas desulfurization gypsum (CP). As a result, the void ratio was increased slightly from the target void ratio, by 1.12-1.42 %. Through evaluating the compressive strength, it was found that the compressive strength of porous concrete with cementless binder decreased in comparison to the compressive strength of porous concrete with ordinary Portland cement (OPC), but the difference was insignificant, at 0.6-1.4 MPa. Through the freeze-thawing test to evaluate the durability, it was found that the relative dynamic elastic modulus of porous concrete with cementless binder decreased to 60 % or less at 80 cycles. The result of the chemical resistance test showed that the mass reduction rate was 12.3 % at 5 % HCl solution, and 12.7 % at 12.3 and 5 % $H_2SO_4$ solutions.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제12권3호
• /
• pp.278-285
• /
• 2012

A digital readout IC for capacitive sensors is presented. Digital capacitance readout circuits suffer from static capacitance of sensors, especially single-ended sensors, and require large passive elements to cancel such DC offset signal. For this reason, to maximize a dynamic range with a small die area, the proposed circuit features digital filters having a coarse and fine compensation steps. Moreover, by employing switched-capacitor circuit for the front-end, correlated double sampling (CDS) technique can be adopted to minimize low-frequency device noise. The proposed circuit targeted 8-kHz signal bandwidth and oversampling ratio (OSR) of 64, thus a $3^{rd}$-order ${\Delta}{\Sigma}$ modulator operating at 1 MH was used for pulse-density-modulated (PDM) output. The proposed IC was designed in a 0.18-${\mu}m$ CMOS mixed-mode process, and occupied $0.86{\times}1.33mm^2$. The measurement results shows suppressed DC power under about -30 dBFS with minimized device flicker noise.

• 한국건축시공학회지
• /
• 제7권2호통권24호
• /
• pp.59-65
• /
• 2007

Recently, due to the increase of high-rise buildings construction, many researches for making harden of concrete earlier and remove of forms faster are being performed to reduce construction period. In this study, we compared and analysed the early strength properties of mortar according to the kinds and replacement ratio of mineral admixture to select the kinds and replacement ratio of mineral admixture of high early strength concrete. For this purpose, mortar mixtures according to the kinds(FA, MK, ZR, BFS, DM) and replacement ratio(0, 2, 4% by volume of sand) of mineral admixture were selected. From our test data, early-age compressive strength decreased in accordance with the increase of replacement ratio of fly-ash(FA) & blast furnace slag powder(BSF) and, in case of addition admixture, early-age compressive strength of with containing 4% appeared higher compared with containing 2%.

• 한국건축시공학회지
• /
• 제11권4호
• /
• pp.379-386
• /
• 2011

Durability of concrete is an important issue, and one of the most critical aspects affecting durability is chloride diffusivity. Factors such as water.cement ratio, degree of hydration, volume of the aggregates and their particle size distribution have a significant effect on chloride diffusivity in concrete. The use of polypropylene fibers(particularly very fine and well dispersed micro fibers) or mineral additives has been shown to cause a reduction in concrete's permeability. The main objective of this study is to evaluate the manner in which the inclusion of fiber(in terms of volume and size) and blast furnace slag(BFS) (in terms of volume replacement of cement) influence the chloride diffusivity in concrete by applying 3D computer modeling for the composite structure and performing a simulation of the chloride penetration. The modeled parameters, i.e. chloride diffusivity in concrete, are compared to the experimental data obtained in a parallel chloride migration test experiment with the same concrete mixtures. A good agreement of the same order is found between multi.scale microstructure model, and through this chloride diffusivity in concrete was predicted with results similar to those experimentally measured.

• 한국음향학회지
• /
• 제39권5호
• /
• pp.424-434
• /
• 2020

본 논문은 콘텐츠 플랫폼에서 절대음량을 산출하는 알고리즘을 서술한다. 절대음량은 개별 음원을 대표하는 하나의 음량이며, 실용적인 범위 내에서, 음원파일 자체의 디지털 영역과 스피커로 출력되는 물리 영역의 음량단위를 통합하여 활용할 수 있도록 설계한 개념이다. 이 개념이 콘텐츠 플랫폼 등에서 실제로 활용되기 위해서는 마스터링 엔지니어의 청음을 거치지 않아도, 자동으로 절대음량 수치를 도출할 수 있어야 한다. 사람이 개별 단일 음원의 대표 음량을 인지하는 핵심 파라미터는 "주파수, 최대에너지, 에너지 변동 계수, 인지가중 에너지 분포도" 영역이며, 가중치 정규화를 통하여 절대음량 수치를 산출하였다.

• 환경영향평가
• /
• 제21권1호
• /
• pp.63-69
• /
• 2012

Sediment has been increasingly acknowledged as a carrier in water system and an available contamination. For this reason, dredging of sediment in reservoir to remediate water quality and secure storage capacity is conducted annually. However, disposal of numerous dredged sediment is necessary as a secondary problem. Currently, in Korea, dredged sediment is classified as waste to be reclamated or recycled into sandy soil, however, they are still in trouble because of spacial and environmental problem. Therefore, rather than simple disposal or reuse into sandy soil, it is necessary to research on method to manage main cause of pollution and increase the value as a resource. In this study, we intend to develop a recycle technology for numerous dredged sediment produced by dredging in deteriorated reservoirs using solidificator (stabilizer). To achieve this, we will consider utilization of dredged sediment and evaluation of use possibility as natural recycle by analysis the characteristics of soil-solidificator mixture in terms of physicochemical properties and the mixing ratio between sediment and solidificator.