• 한국세라믹학회지
• /
• 제44권11호
• /
• pp.618-621
• /
• 2007

In this study, flint glass batches with blast furnace slag (BFS) were prepared and the contribution of the BFS to the fining of melts was studied through investigations of the melting and fining characteristics. Additionally, a sulfur redox reaction for BFS-doped melts was examined by square wave voltammetry (SWV). The results of the melting & fining test showed that BFS improved the fining of the melts. In a voltammogram of BFS-doped melts, two reduction peaks were shown at high frequencies while only one peak appeared at low frequencies. The peaks were located at a potential that was similar to those of melts fined by sulfate. From those results it was concluded that sulfide ($S^{2-}$) in BFS has effects in glass melts that are identical to those of sulfate ($SO_4^{2-}$).

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 봄 학술발표회 논문집
• /
• pp.269-274
• /
• 2000

As a result of the reduction of natural aggregate, most of developed country have been studied the utilization of Blast-furnace Slag(BFS) as aggregate of concrete. bur, in korea there are only basic study about these even though other country are using Blast-furnace Slag production of Ready Mixed Concrete. According, in this study, we carried out fundamental experiments in order to know the material properties of BFS and possibilities of the BFS as fine aggregate of concrete. It is included that analysis concerning material properties of BFS as like specific gravity, absorption. unit weigth, grading including investigation of the surface shape by SEM, also, analysis concerning properties of concrete with BFS as like air-content surface slump. compressive strength .etc.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 추계 학술논문 발표대회
• /
• pp.81-82
• /
• 2012

The purpose of this study is the hydration properties of motar using Blast-Furnace Slag(BFS) with water elured from recycled coarse aggregate. The results of the experiment show that the water eluted from recycled coarse aggregate mixed with blast furnace slag has comparatively higher hydration activity than the mortar not mixed with one in early-age mortar causing the calcium hydroxide in the recycled coarse aggregate to work on as a stimulus to the hydration of ground granulated blast furnace slag. BFS mixed with the eluting water the hydration reaction was a promotion.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 학회창립 10주년 기념 1999년도 가을 학술발표회 논문집
• /
• pp.191-194
• /
• 1999

Recently in Korea, may workers have reported the effects of the granulated blast furnace slag[BFS] of high fineness on the strength development of slag cement. We have studied the effect of slag fineness on the strength development of mortar with curing conditions, in order to get the basic data of high strength concrete using BFS. In this paper, we discussed the effects of slag fineness and porosity of mortar and the reaction of slag in hardened slag cement.

• 한국농공학회논문집
• /
• 제52권3호
• /
• pp.9-17
• /
• 2010

This study aims to evaluate a porous concrete using hwang-toh, blast furnace slag and blast furnace slag (BFS) cement instead of type I cement. The tests that were carried out to analysis the properties of porous hwang-toh BFS cement concrete included compressive strength, continuous void ratio, absorption rate, and pH value, repeated freezing and thawing test were conducted. Test results indicated that the performance in porous hwang-toh concrete are effective on the kaoline based binder materials. The pH value were shown in about 9.5 ~ 8.5. The compressive strength was increased and void ratio was decreased with increasing the kaoline based binder materials, respectively. The void ratio and compressive strength were in the range of about 21 ~ 30 %, 8 ~ 13 MPa, respectively. The increased in void ratio of more than 25 % is showed to reduce the resistance of repeated freezing and thawing. Also, the resistance of repeated freezing of thawing and the compressive strength of porous hwang-toh BFS cement concrete are independent with hwang-toh content and BFS cement amount. But, the void ratio was decreased with increasing the high volume hwang-toh contents (more than 15 %).

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회 논문집(II)
• /
• pp.951-956
• /
• 2000

Blast furnace slag powder(BFS) is potential hydration material, and that usage is increased the construction. But, the amount of BFS is important factor with the properties of concrete. The determinational method of slag powder experiments by salicylic acid-methyl alcohol solution method. From these results we can determine the amount of slag powder with blaine 4, 000 and 6, 000 in fresh concrete.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 춘계 학술논문 발표대회
• /
• pp.43-45
• /
• 2012

As a part of recent CO₂ emission reduction studies in the concrete industry with active use of concrete admixtures with low basic unit of CO₂ emission such as blast furnace slag (BFS), basic unit of CO₂ emission by SBFS was computed in order to assess CO₂ emission by reinforced concrete building with smart blast furnace slag (SBFS). In addition, SBFS concrete was applied to the subject building for assessment of CO₂ emission during material production step among construction steps. Life cycle CO₂ emission assessment on the subject building was classified into 7cases according to mix ratio of BFS and SBFS.

• 한국구조물진단유지관리공학회 논문집
• /
• 제14권5호
• /
• pp.153-160
• /
• 2010

고로슬래그 미분말을 순환골재 모르타르 및 콘크리트의 제조에 활용할 경우, 순환골재에서 용출된 $Ca(OH)_2$가 고로슬래그에 대한 자극제 역할을 수행하여 수화반응을 개선할 수 있을 것으로 판단되고 고로슬래그를 통해 알칼리 저감 효과를 얻을 것으로 예상되어 본 연구를 진행하게 되었다. 그 결과 고로슬래그 미분말을 혼입 사용한 순환 잔골재 모르타르는 재령 3일에서는 고로슬래그 혼입율에 따라 강도가 감소하는 결과를 나타냈다. 이는 고로슬래그의 수화반응이 일어나지 않았기 때문으로 판단되며 또한, 순환 잔골재 혼입률에 관계없이 고로슬래그 미분말의 혼입률이 증가함에 따라 재령 3일 측정한 수화활성도도 저하되는 것으로 나타났다. 재령 7일에서는 순환 잔골재에서 용출된 수산화칼슘($Ca(OH)_2$)이 자극제 역할을 수행하여 고로슬래그 미분말을 혼입한 배합의 압축강도 발현이 천연 잔골재를 사용한 모르타르보다 서서히 증가하는 결과를 보이기 시작하였으며 이로 인해 재령 7일 측정한 고로슬래그 미분말을 단계별로 혼입한 배합의 수화활성도가 고로슬래그를 혼입하지 않은 배합보다 높아지는 것으로 나타났다. 재령 28일에서는 고로슬래그 미분말 혼입률 30% 배합에서는 고로슬래그의 수화반응으로 인해 천연 잔골재를 사용한 배합보다 높은 압축강도를 보이기 시작하였으며 이때 측정한 수화활성도는 천연 잔골재를 사용한 배합과 특별한 차이를 보이지 않았으며, 이는 지속적으로 수산화칼슘($Ca(OH)_2$)이 공급되지 못하였기 때문으로 판단된다.

• 한국건설순환자원학회논문집
• /
• 제11권4호
• /
• pp.552-559
• /
• 2023

본 연구는 팽창성 및 팽윤성 혼화제를 혼입한 고로슬래그 콘크리트의 균열 저감 성능 평가를 목적으로 한다. 기본 성능 실험으로 고로슬래그미분말(BFS), 칼슘설포알루미네이트(CSA), 벤토나이트, 하이드록시프로필 메틸셀룰로오스(HPMC) 등 다양한 혼입물을 사용하여 수행한 결과 벤토나이트가 HPMC에 비해 우수한 성능을 나타내었다. 이후, 혼입률에 따른 균열 및 건조수축 평가를 위해 MOCK-UP 테스트를 실시하였다. 그 결과, 벤토나이트와 소량의 인산칼슘을 첨가하였을 때 건조수축이 감소되어 균열이 저감 되었다. 특히, 30 %의 BFS, 1 %의 벤토나이트, 1 %의 인산칼슘으로 구성된 시멘트 혼합물이 균열이 없는 최적의 성능을 보였다. BFS 콘크리트가 지속적인 팽창 활동에 의하여 수축을 보상하는데 기여할 것으로 판단되며 현장 적용에 사용될 수 있을 것이다.

• Geomechanics and Engineering
• /
• 제3권3호
• /
• pp.207-218
• /
• 2011

This article describes laboratory research done on strength evaluations for stabilized samples made of tropical fibrous peat. The stabilizing agents used were ordinary Portland cement (OPC) as binding agent and blast furnace slag (BFS) as additive. Stabilized samples were tested for their strength through unconfined compressive strength (UCS) and California bearing ratio (CBR). Different dosage rates of OPC and BFS were used in trial and error experiments for the most effective combination for stabilized peat samples that were at their natural moisture content. Stabilized trial samples were air cured for 90 days. After detecting the most effective dosage rate in the trial samples, their values were used to prepare CBR samples at their optimum moisture content (OMC). CBR samples were then air cured from 1 to 90 days and tested under un-soaked and soaked conditions. The most effective dosage rate for the stabilized peat samples was found to be close to when 75% for OPC and 25% of BFS per total weight of OPC, and BFS. As an example, if 11.25% OPC, and 3.75% BFS are mixed with peat and compacted at their OMC and air cured for 90 days, stabilized peat will have an increase in CBR of 0.8% to 45 % for un-soaked and 20% for soaked conditions.