• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.4
• /
• pp.148-156
• /
• 2009

This paper presents a new image rejection algorithm based on the analysis of the distortion of a single-frequency continuous-wave (CW) signal due to the I/Q mismatch. Existing methods estimated the gain mismatch and phase mismatch on RF receivers and compensated them However, this paper shows that the circular trajectory of a single-frequency CW signal is distorted elliptic-type trajectory due to the I/Q mismatch. Utilizing the analysis, we propose a I/Q mismatch compensation method. It has two processing steps. In the first processing step, the generated signal is rotated to align the major axis of the elliptic-type trajectory diagram with the x-axis. In the second processing step, the Q-channel signal in the regenerated signal is scaled to align the regenerated signal with the transmitted single-frequency CW signal. Simulation results show that a receiver using the proposed image rejection algorithm can achieve an image rejection ratio of more than 70dB. And, simulation results show that the bit error rate performances of receivers using the proposed image rejection algorithm are almost the same as those of conventional coherent demodulators, even in fading channels.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.2
• /
• pp.67-74
• /
• 2008

This paper proposes two peak-windowing algorithms for peak-to-average power reduction(PAPR) of orthogonal frequency division multiple access(OFDMA) downlink systems. The Proposed algorithms mitigate the effect of excessive suppression due to successive peaks or relatively high peaks of the signal. First, multi-stage peak windowing algorithm is proposed, which exploits multiple threshold of target PAPR in order to step down the peaks gradually. Secondary, variable-length peak windowing algorithm is proposed, which adapts the window length with respect to the existence of successive peaks within a half of window length. Therefore, the proposed method reduces the distortion of signal amplitude caused by window overlapping. The proposed algorithms outperform the conventional peak windowing with the aid of window-length adaptation or sequential peak power reduction. Simulation results show the efficiency of the proposed algorithms over OFDMA downlink systems, especially WiBro systems.

• Journal of Korean Society of Steel Construction
• /
• v.20 no.1
• /
• pp.21-31
• /
• 2008

response surface method (RSM) is widely used to evaluate th e extremely smal probability of ocurence or toanalyze the reliability of very complicated structures. Althoug h Monte-Carlo Simulation (MCS) technique can evaluate any system, the procesing time of MCS dependson the reciprocal num ber of the probability of failure. The stochastic finite element method could solve thislimitation. However, it is limit ed to the specific program, in which the mean and coeficient o f random variables are programed by a perturbation or by a weigh ted integral method. Therefore, it is not aplicable when erequisite programing. In a few number of stage analyses, RSM can construct a regresion model from the response of the c omplicated structural system, thus, saving time and efort significantly. However, the acuracy of RSM depends on the dist ance of the axial points and on the linearity of the limit stat e functions. To improve the convergence in exact solution regardl es of the linearity limit of state functions, an improved adaptive response surface method is developed. The analyzed res ults have ben verified using linear and quadratic forms of response surface functions in two examples. As a result, the be st combination of the improved RSM techniques is determined and programed in a numerical code. The developed linear adapti ve weighted response surface method (LAW-RSM) shows the closest converged reliability indices, compared with quadratic form or non-adaptive or non-weighted RSMs.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.11
• /
• pp.801-807
• /
• 2022

In this paper, we propose an ultra compact S-Band PCM/FM telemetry transmitter. The equipment is compact, so it can be applied to a limited space and capable of stable data transmission was designed and manufactured even with specifications set differently for each operating environment and system. RF direct conversion structure is used for the miniaturization of equipment, an RF transmission board, Power distribution board, and a signal processing board were implemented on a single PCB, so that the function of the transmitter could be performed with a minimum device. According to the target specification, variable output of 1~10W and variable data rate of 390kbps~12.5Mbps is possible in S-Band(2,200~2,400MHz) without degradation of performance. To verify the performance of the equipment, the RF performance test and BER measurement test were performed after the equipment was manufactured. It was confirmed that the OBW, null-to-null bandwidth, 1st IMD, Spurious emission, Phase noise specification of the PCM/FM modulated signal which is presented by the IRIG standard were satisfied, and we can confirm the data received using the transmitter inspection equipment were transmitted normally without distortion.

• Journal of Plant Biology
• /
• v.27 no.3
• /
• pp.179-189
• /
• 1984

Durch vergleichende Untersuchungen von Ribes nigrum L. var. 'Rosenthals Langtraubige Schwarze' zwischen $prim\"{a}rem$ und $sekund\"{a}rem$ Jugendstadium (P.J. und S.J.) eine vertiefte Einsicht in die beiden zeitlich unterschielich langen $Entwicklungsabl\"{a}ufe$ zu bekommen und auf diese Weise bessere Ansatzpunke $f\"{u}r$ die Regulierung der $Bl\"{u}tc-nknospeninduktion$ zu gewinnen, war das Ziel vorliegenden Untersuchungen. Diese Untersuchungen $f\"{u}hrten$ zu den flogenden Ergebnissen: Die Dauer der Jugendphase von Ribes nigrum L. betrug bei den P.J.-Pflanzen ca. 7 Monate, bei den S.J.-Pflanzen ca. 5 Monate. Die $Bl\"{u}hreife$-(Ripeness to flower)-setzte bei den P.J.-Pflanzen erst beim 20. Nodium ein, bei den S.J.-Pflanzen bereits beim 5. Nodium. Das $f\"{u}hrte$ dazu, da${\beta}$ bei gleicher Nodienzahl die P.J.-Pflanzen weniger $Bl\"{u}te-nknospen$ angesetzt hatten als die S.J.-Pflanzen. Die erste $Bl\"{u}tenknospendifferenzierung$ setzte bei den P.J.-Pflanzen in der oberen Triebmitte etwa am 30. Nodium ein, beiden S.J.-Pflanzen bereits in der unteren Tricbmitte etwa am 20. Nodium. Bie den P.J.-Pflanzen waren die untersten 20. Nodien immer steril, $w\"{a}hrend$ bei den S.J.-Pflanzen $h\"{a}uflgsten$ an dem ersten Nodium $\"{u}ber$ der Basis fertil waren. In allen Versuchen hat sich gezeigt, da${\beta}$ der Wachstumsabschlu${\beta}$ -(Bildung einer Terminal Knospe)-, der bei Ribes nigrum L. durch Kurztag eingeleitet wird, bei den P.J.-Pflanzen langsammer als bei den S.J.-Pflanzen erfolgt. Dies $f\"{u}hrt$ dazu, da${\beta}$ die Pflanzen der $sekund\"{a}ren$ Jugendphase auf die photokybernetischen Stimulation empfindlicher reagieren als die der $prim\"{a}ren$ Jugendphase. Alle untersuchten Versuchsdaten $f\"{u}hren$ zu dem Schlu${\beta}$, da${\beta}$ die Wurzelgibberelline $(GA_n)$ keinen Einflu${\beta}$ auf die $Jugendsterilit\"{a}t$ ($Basissterilit\"{a}t$) haben. Aus den Untersuchungen geht hervor, da${\beta}$ die induktive Ma${\beta}$nahme zur Beschleunigung der $Bl\"{u}tenknospenbildung$ $f\"{u}r$ eine $Z\"{u}chtungsselektion$ erst dann eingesetzt werden sollen, wenn die P.J.-Pflanzen mehr als 20 Nodien ausgebildet haben.

• Korean Journal of Food Science and Technology
• /
• v.37 no.2
• /
• pp.183-188
• /
• 2005

Effects of co-solvent polarity, citric acid, pressure, temperature, run time, and co-solvent ratio on extraction of major flavonoids from Lonicera Flos were investigated using supercritical fluid $CO_{2}(SF-CO_{2})$. HPLC analysis revealed addition of pure methanol resulted in low extraction yield of major flavonoids, luteoloin (Lu), Quercetin (Qu), Apigenin (Ap). Under same condition, as co-solvent polarity increased, yields of major flavonoids increased gradually, At optimum co-solvent extraction condirion of 60% aqueous methanol (10%, v/v), yields of Lu, Qu, and Ap were 42.09, 28.18, and 3.49 mg/100 g, respectively. Addition of citric acid to 60% aqueous methanol gave higher, with addition of 1% citrie acid resulting in highest yields of 63.2 (Lu), 39.35 (Qu), and 5.79 (Ap) mg/100 g. Optimum extraction conditions of major flavonoids were 200 bar, $50^{\circ}C$, 60 min, and $CO_{2}$-methanol-water(20: 1.8: 1.2).