• Archives of Plastic Surgery
• /
• 제33권1호
• /
• pp.107-112
• /
• 2006

If autogenous nail is lost in nail bed injuries, alternative effective nail bed protection material is questionable in postoperative follow up period. The conventional modality with autogenous nail coverage have several disadvantages such as drawback of maintenance, higher chance of loss and complex dressing step (eg. ointment apply for humidification and nail fixation using tape or bandage). So, we have studied the usefulness of adhesive silicone gel sheet for alternative nail bed protection material until the end of nail regeneration. From March 2003 to July 2004, we have experienced 215 traumatic nail bed injuries except fingertip loss. Among these patient, we classified two groups, 30 cases with autogenous nail protection(Group I) and 30 cases with adhesive silicone gel sheet protection(Group II). Mean full nail growth time was 3.6 months in group I and 3.8 months in group II. Mean final nail appearance score(0: poor, 4: excellent) was 3.0 in group I and 3.5 in group II. Adhesive silicone gel sheet protection(Group II) was slightly superior to the autogenous nail protection in final appearance, especially sterile matrix laceration. In conclusion, we believe that adhesive silicone gel sheet application is a simple, acceptable, alternative method for protecting nail bed with loss of autogenous nail. It has a number of advantages compared with autogenous nail such as better humidification, controllable hygiene, less pain, less hospitalization, less frequent visit, less chance of loss, avoiding complex dressing step and more even pressure with adhesiveness, flexibility and durability.

• 한국환경보건학회지
• /
• 제19권4호
• /
• pp.38-43
• /
• 1993

The characteristics of food wastewater treatment in an anaerobic packed bed reactor (APBR) with polyurethane as a packing material and sludge bed reactor (ASBR) was studied. The reactor of 9cm-ID, 150cm-height was fed in a continuous mode from bottom of reactor. For the purpose of constant temperature of reactor, water jacket was installed. The used packing materials was polyurethane sponge foam. Methane which was produced by decomposed organics collected at the top of the reactor for using as a fuel. The substrates used were synthetic, mixed and food wastewater. For the acclimatization of microorganisms, mixed wastewater was used. The major analyses were gas production, COD, pH and volatile acids. Based upon the completed works, the results are as follows: When food wastewater was fed the quantity of produced gas was less than that of synthetic wastewater, but food process saw higher methane content than synthetic process. As well as COD removal efficiency of food process reached at about 85%. In aspect of effluent volatile acid, food process showed low concentration of below 500 mg/l, therefore anaerobic reaction stabled. Conclusively food wastewater used can be digested by anaerobic treatment, especially anaerobic packed bed reactor showed 82% of COD removal, 75% of methane content, 10 l of gas production, and anaerobic sludge bed reactor did 79% of COD removal, 75% of methane content, 81 of gas production at 4 kgCOD/m$^3$day, 36$\circ$C.

• 한국환경생태학회지
• /
• 제22권1호
• /
• pp.43-58
• /
• 2008

하천식물의 자연환경조건을 규명하기 위하여 국내 중소규모의 10개 하천(한강수계의 문산천, 곡릉천, 낙동강 수계의 미천, 쌍계천, 남천, 북한강 수계의 가평천, 조종천, 남한강 수계의 청미천, 양화천, 복하천)을 선별한 다음에 각 하천의 전 유로연장에서 가장 자연성이 높은 구간 1km를 중점조사구로 결정하였다. 그리고 그 구간에 대하여 $2004\sim2007$년 여름에 식물조사를 belt transect 방법으로 실시하였다. 그 결과 총 296종이 출현하였는데, 그 중에서 출현빈도가 높은 121종과 대상지의 환경인자(저수로 물로 부터의 거리, 하상재료의 크기, 사주의 개수, 대상지의 고도, 하상경사, 저수로의 폭, 하천수질측정값)간의 RDA (Redundancy analysis) 및 피어슨의 상관성 분석을 실시하였다. 그 결과 대입된 식물종들은 대상지의 고도, 하상경사, 사주의 개수의 인자와는 유의성이 없었으나, 하상재료의 크기, 저수로의 폭, 전기전도도와 인산염인$(PO_4-P)$의 농도와는 상관성이 “매우 높은$\sim$보통”으로 분석되었다. 그리고 이 식물들은 현재의 그들의 수환경 조건을 그대로 반영하고 있기 때문에 분석방법의 신뢰성에 큰 무리가 없으나, 사례의 다양성 부족으로 다른 사례하천으로의 확대해석은 어려울 것이다. 그러나 본 자료는 앞으로 하천특성에 따른 식물연구나 하천식물 선정을 위한 기초 자료로는 이용할 수 있을 것이다.

• 상하수도학회지
• /
• 제33권1호
• /
• pp.9-16
• /
• 2019

The algal blooms in stagnant streams and lakes have caused many problems. Excessive algae leads to disturbance of ecosystem and overload of water treatment processes. Therefore, phosphorus(P), source of algal blooms, should be controlled. In this study, a filtration trench has been developed to convert dissolved phosphorus into hydroxyapatite(HAP) so that it could be crystallized on the surface of 'phosphorus removal granular material'; and residual particulate phosphorus could be removed by additional precipitation and filtration. The front and rear parts of filtration trench consisted of 'phosphorus removal granular material contact bed' and 'limestone filtration bed', respectively. As a result of the column test using phosphorus removal granular material and limestone serially, $PO_4-P$ was removed more than 90% when EBCT(empty bed contact time) of the contact bed was over 20 minutes; and T-P represented 60% of removal efficiency when total EBCT was over 1.5 hours. The results of column tests to figure out the sedimentation characteristics showed that more than 90% of particulate phosphorus could be removed within 24 hours. It was necessary to optimize the filtration part in order to increase removal efficiency of T-P additionally. Also, it was confirmed through the simulation of Visual MINTEQ that most of particulate phosphorus in the column tests is the form of HAP. Based on the results of the study, it could be suggested that the design parameters are over 0.5 hour of EBCT for phosphorus removal granular material contact bed and over 1.5 hours of EBCT for limestone filtration bed.

• Journal of Welding and Joining
• /
• 제34권4호
• /
• pp.1-8
• /
• 2016

Metal AM(Additive Manufacturing) has been steadily developed and that is classified into two method. PBF(Powder Bed Fusion) deposited in the bed by the laser or electron beam as a heat source of the powder material and DED(Directed Energy Deposition) deposited by varied heat source of powder and solid filler material. In the developed countries has been applying high productivity process of solid filler metal based DED method to the aerospace and defense sectors. The price of the powder material is quite expensive compared to the solid filler metal. A study on DED method that is based on a solid filler metal is increasing significantly although was low accuracy and degree of freedom.

• 한국수자원학회논문집
• /
• 제33권1호
• /
• pp.111-121
• /
• 2000

본 연구에서는 연속방정식, 운동량방정식, 2차흐름의 연직분포식, 횡방향 하상경사식 등을 이용하여 단일만곡수로 뿐만 아니라 연속만곡수로에서 흐름특성과 하상변동을 분석할 수 있는 수치모형을 계산하였다. 단일만곡수로에서는 흐름특성치와 하상변동을 실험치와 비교하였으며, 연속만곡수로에서는 최대유속의 이동경로를 Vadnal 수치모형의 계산치, Chang의 실험치와 비교하여 만족할 만한 결과를 얻었다. 중심각 $180^{\circ}$ 인 유로만곡부에서 고정상 및 이동상의 조건으로 실험을 실시하였으며, 하상재료로는 모래와 안트라싸이트를 선택하였다. 모래와 안트라싸이트의 경우에도 실험치와 계산치가 비교적 일치하고 있어서 하상재료가 변화되는 유로만곡부에서도 수치모형의 적용성을 확인하였다. 이 연구는 유로만곡부의 설계, 시공, 유지 및 관리 등에 필요한 흐름특성과 하상변동에 관한 기초자료를 제공할 것으로 생각된다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2018년도 학술발표회
• /
• pp.149-149
• /
• 2018

Prediction on initial motion of sediment is crucial to evaluate sediment transport and channel stability. The condition of incipient movement of sediment is characterized by bed shear stress, which is generated from force of moving water against the bed of the channel, and by critical shear stress, which depends on force resisting motion of sediment due to the submerged weight of the grains. When the bed shear stress exceeds the critical shear stress, sediment particles begin rolling and sliding at isolated and random locations. In Mountain River, debris flow frequently occurs due to heavy rainfall and can lead some natural stones from mountain slope into the bed river. This phenomenon could add additional forces to sediment transport system in the bed of river and also affect or change direction and magnitude of sediment movement. In this paper, evaluations on incipient motion of uniform coarse gravel under falling spheres impacts using small scale flume channel were conducted. The drag force of falling spheres due to water flow and length movement of falling spheres were investigated. The experiments were carried out in flume channel made by glass wall and steel floor with 12 m long, 0.6 m wide, and 0.6 m deep. The bed slopes were selected with the range from 0.7% to 1.5%. The thickness of granular layer was at least 3 times of diameter of granular particle to meet grain placement condition. The sphere diameters were chosen to be 4cm, 6 cm, 8 cm, 10 cm. The spheres were fallen in to the bed channel for critical condition and under critical condition of motion particle. Based on the experimental results, the Shields curve of particles Reynold number and dimensionless critical shear stress were plotted. The relationship between with drag force and the length movement of spheres were plotted. The pathways of the bed material Under the impact of spheres falling were analyzed.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 추계학술대회
• /
• pp.75-78
• /
• 2006

With the increasing environmental consideration and stricter regulations waste gasification is considered to be more attractive technology than conventional incineration for energy recovery as well as material recycling. The experiment for combustible waste was performed In the fixed bed gasifier to investigate the gasification behavior with the operating conditions in a 5ton/day fixed bed gasifier The experiments of operation with 10-50 hours were carried out to determine the effects of bed temperature and oxygen/waste rat io on the syngas composition, calorific value and carbon conversion. The calorific values of the produced syngas decreased with an Increase of bed temperature because combust ion reaet ion more act ively happened. The syngas composition of wood waste gasification is CO: 34.4%, $H_2: 10.7%,\;CH_4: 6.0%,\;CO_2: 48.9%$ and that of RPF is CO: 33.9%, $H_2: 26.1%,\;CH_4: 10.7%,\;CO_2: 29.2%$. The average calorific values of produced gas were about $1,933kcal/Nm^3,\;2,863kcal/Nm^3$, respectively

• 설비공학논문집
• /
• 제2권2호
• /
• pp.119-126
• /
• 1990

In this study, the overall heat transfer coefficients are calculated on fluidized bed double pipe heat exchanger and single phase double pipe heat exchanger at the same condition. The effect of the particle size, its material, fluidizing velocity and static bed height on overall heat transfer coefficient has been investigated. The main conclusions obtained from the experiment are as follows. 1. The overall heat transfer coefficient of the fluidized bed heat exchanger is higher than that of single phase forced convective heat exchanger (maximum 2.3 times) 2. The value of the overall heat transfer coefficient increase with an increase in static bed height and decrease with an increase in particle size. 3. For the same particle size, the particle of low density can obtain higher overall heat transfer coefficient than that of high density.

• 한국해안·해양공학회논문집
• /
• 제21권2호
• /
• pp.127-135
• /
• 2009

Reid and Kajiura(1957)은 해저면에 무한한 깊이의 투수층이 존재할 경우에의 파의 감쇠율을 유도하였다. 본 연구에서는 유한한 깊이의 투수층이 존재할 경우에의 파의 감쇠율을 선형파이론을 이용하여 유도하였다. 그리고 이를 확장하여 해저면에 재질이 다른 2 층 또는 3 층의 투수층이 존재할 경우에 파의 감쇠율을 제시하였다. 다음으로 이를 완경사 방정식에 적용하여, 해저면에 투수층이 존재할 경우에의 파의 투과율을 계산하였으며, 1층 투수층이 존재할 경우의 수치계산결과를 Flaten and Rygg(1991)의 적분식 방법과 비교하여 검증하였다.