• 국제학술발표논문집
• /
• The 8th International Conference on Construction Engineering and Project Management
• /
• pp.333-342
• /
• 2020

Due to the enhancing environmental concerns worldwide with the need of increasing demand for sustainability of building design, maintenance and operation, key stakeholders including the government and developers in many countries strike for the benefits in implementing the green design and building concepts in constructing, infrastructure as well as the buildings. Different countries have their standards or certifications for green buildings while the adoption rate of BEAM-Plus in HK is relatively less compared with other developed countries such as Europe, USA and Japan. Therefore, in the present research, BEAM-Plus, the beginning assessment method of green standard implemented in HK, will be mainly discussed. Current situation of BEAM-Plus implementation in HK will be reviewed and then adopt a systematic approach via literature review and research paper, questionnaire with Analytic Hierarchy Process (AHP) method to depict the opportunities and challenges from the perspective of government and developers regarding implementing BEAM-Plus in HK and thus investigate the implementation gaps. It is found that for both the macro level of opportunity and challenge, the most important criterion is political, in which the weighting value are 0.3114 and 0.2321 respectively. It is obvious that government plays a critical and significant role in affecting the development of BEAM plus. Technological difficulty is also an important factor that challenging and hindering the implementation of BEAM plus, the weighting value is 0.2194 under challenge hierarchy. More experts and professionals should be imported to Hong Kong to enhance the technique is building green buildings. At the end of this paper, solutions and actions will also be suggested and concluded in alleviating the challenges. Finally, solutions and actions are suggested and concluded in alleviating the challenges. Findings from this research can guide developers to consider adopting green elements, government and Green Building Council in HK to review green buildings' policy.

• KCI Concrete Journal
• /
• 제14권3호
• /
• pp.111-120
• /
• 2002

This study proposes a joint model consisting of different types of members as a new structural system, and then investigates the resulting structural behavior. The joint model consists of a concrete-filled steel tube column (CFT) together with a steel reinforced concrete at the end plus reinforced concrete beam at the center. For comparison, two other joint models were designed, that are, a CPT with a reinforced concrete beam, and a CFT with a steel reinforced concrete at the end plus steel concrete beam at the center, then their joint capacity and rigidity, energy absorption capacity, etc., were all investigated. From the results, the CFT column with a steel reinforced concrete at the end plus steel concrete beam at the center was outstanding in terms of its capacity and rigidity. The results of this analysis demonstrate that an adequate connection type and reinforcement method with different materials of increasing the rigidity, thereby producing a capacity improvement along with protection from pre-fractures.

• 대한방사선치료학회지
• /
• 제29권2호
• /
• pp.65-73
• /
• 2017

목 적: Machine Performance Check (MPC)는 Electronic Portal Imaging Device(EPID)를 기반으로 빔 출력을 별도의 설치 없이 측정할 수 있는 장점을 지닌 자체 검사 소프트웨어이다. 본원에서는 MPC와 QA Beamchecker PLUS 간의 일간 빔 출력을 비교 및 상관관계를 분석하여 MPC의 유용성을 확인하고자 하였다. 대상 및 방법: 본 실험을 진행하기 위해 선형가속기(Truebeam 2.5)를 이용하였고, 광자선(6 MV, 10 MV, 15 MV, 6 MV-FFF, 10 MV-FFF), 전자선(6 MeV, 9 MeV, 12 MeV, 16 MeV, 20 MeV) 총 10개의 에너지를 대상으로 5 개월간 치료 전 빔 출력을 MPC와 QA Beamchecker PLUS로 측정하여, 총 80 회의 데이터를 획득하였다. Pearson 상관계수를 사용하여 MPC와 QA Beamchecker PLUS 간의 빔 출력을 비교 및 상관관계를 평가하였다. Pearson 상관계수는 0.8 이상은 아주 강함, 0.6 이상 0.8 미만 강함, 0.4 이상 0.6 미만 보통, 0.2 이상 0.4 미만 약함, 0.2 미만 아주 약함을 의미한다. 결 과: MPC와 QA Beamchecker PLUS 모두 일간 빔 출력 일치도는 2 % 이내로 나타났다. MPC의 빔 출력은 광자선이 $0.29{\pm}0.26%$, 전자선이 $0.30{\pm}0.26%$로 나타났고, QA Beamchecker PLUS의 빔 출력은 광자선이 $0.31{\pm}0.24%$, 전자선이 $0.33{\pm}0.24%$로 나타났다. MPC와 QA Beamchecker PLUS 사이의 Pearson 상관계수는 광자선의 경우 15 MV에서는 아주강함, 6 MV, 10 MV, 6 MV-FFF 그리고 10 MV-FFF에서는 강함으로 나타났고, 전자선의 경우 16 MeV, 20 MeV에서 강함, 9 MeV, 12 MeV에서 보통, 6 MeV에서 아주 약함으로 나타났다. 결 론: MPC는 일간 빔 출력 평가 면에서 광자선과 고에너지 전자선에서는 QA Beamchecker PLUS와 강한 상관관계로 보임을 확인할 수 있었다. 다만, 저에너지 전자선(6 MeV)에서는 낮은 상관관계를 보였지만, 관찰기간동안 MPC, QA Beamchecker PLUS 모두 빔 출력 일치도는 2 % 이내로 일간 빔 출력 확인 용도로는 적절할 것으로 판단된다. MPC는 기존의 일간 빔 출력 측정 도구 보다 빠르게 수행 할 수 있어 사용자 입장에서 효과적인 방법인 것으로 사료된다.

• 한국결정성장학회지
• /
• 제17권2호
• /
• pp.52-56
• /
• 2007

본 연구에서는 초고진공(UHV, ultra high vacuum) 분자선 에피성장(MBE, molecular beam epitaxy) 시스템을 제작하여, ZnSe/GaAs[001]을 증착하였고, 증착된 박막의 특성을 SEM(scanning electron microscopy), AFM(atomic force microscopy)으로 조사하여, 분자층 단위의 조밀하고 균일한 표면특성을 보이고 있음을 확인할 수 있었다 XRD(x-ray diffractometer)를 이용하여, GaAs[001]기판의 XRD peak 위치와 ZnSe 박막의 XRD peak 위치가 각자 일치함을 확인할 수 있었다. PL(photoluminescence)로는 대략 437nm에서 발광하는 것이 관측되었으며, 2인치 ZnSe 박막의 PL mapping을 측정하였다.

• ETRI Journal
• /
• 제34권6호
• /
• pp.869-878
• /
• 2012

A beam design method based on signal-to-leakage-plus-noise ratio (SLNR) has been recently proposed as an effective scheme for multiuser multiple-input multiple-output downlink channels. It is shown that its solution, which maximizes the SLNR at a transmitter, can be simply obtained by the generalized eigenvectors corresponding to the dominant generalized eigenvalues of a pair of covariance matrices of a desired signal and interference leakage plus noise. Under time-varying channels, however, generalized eigendecomposition is required at each time step to design the optimal beam, and its level of complexity is too high to implement in practical systems. To overcome this problem, a predictive beam design method updating the beams according to channel variation is proposed. To this end, the perturbed generalized eigenvectors, which can be obtained by a perturbation theory without any iteration, are used. The performance of the method in terms of SLNR is analyzed and verified using numerical results.

• 한국진공학회지
• /
• 제15권5호
• /
• pp.458-464
• /
• 2006

본 연구에서는 초고진공 (UHV; ultra high vacuum) 분자선 에피성장 (MBE; molecular beam epitaxy) 시스템의 제작과 성능연구가 성공적으로 이루어졌다. 초고진공 용 분자선 에피성장 시스템을 국산화개발 및 제작하여, 장비에 관한 성능 테스트를 하게 되었다. 본 장비의 진공도가 $2X10^{10}$ Torr에 도달함을 확인하였고, 시편 가열모듈(substrate heating module)이 $1,100^{\circ}C$까지 가열됨을 확인할 수 있었으며, ZnSe/GaAs(001)의 증착특성을 SEM (scanning electron microscope), AFM (atomic force microscope), XRD (x-ray diffraction), PL (photoluminescence) 등으로 조사하였다.

• Nuclear Engineering and Technology
• /
• 제49권4호
• /
• pp.700-709
• /
• 2017

This work looks at the effect of changes in kinetic parameters on simultaneous reactivity insertions and beam tube flooding in a typical material testing reactor-type research reactor with low enriched high density ($U_3Si_2-Al$) fuel. Using a modified PARET code, various ramp reactivity insertions (from $0.1/0.5 s to $1.3/0.5 s) plus beam tube flooding ($0.5/0.25 s) accidents under uncontrolled conditions were analyzed to find their effects on peak power, net reactivity, and temperature. Then, the effects of changes in kinetic parameters including the Doppler coefficient, prompt neutron lifetime, and delayed neutron fractions on simultaneous reactivity insertion and beam tube flooding accidents were analyzed. Results show that the power peak values are significantly sensitive to the Doppler coefficient of the system in coupled accidents. The material testing reactor-type system under such a coupled accident is not very sensitive to changes in the prompt neutron life time; the core under such a coupled transient is not very sensitive to changes in the effective delayed neutron fraction.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제17권9호
• /
• pp.2590-2608
• /
• 2023

The high-altitude and mobility characteristics of unmanned aerial vehicles (UAVs) have made them a key element of new radio systems, particularly because they can exceed the limits of terrestrial networks. However, at high altitudes, UAVs can be significantly affected by intercell interference at a high line-of-sight probability. To mitigate this drawback, we propose an algorithm that selects the optimal beam to reduce interference and maximize transmission efficiency. The proposed algorithm comprises two steps: constructing a user-location-based fingerprint database according to the user types presented herein and cooperative beam selection. Simulations were conducted using cellular cooperative downlink systems for analyzing the performance of the proposed method, and the signal-to-interference-plus-noise cumulative distribution function and spectral efficiency cumulative distribution function were used as performance analysis indicators. Simulation results showed that the proposed algorithm could reduce the effect of interference and increase the performance of the desired signal. Moreover, the algorithm could efficiently reduce overheads and system cost by reducing the amount of resources required for information exchange.

• Applied Microscopy
• /
• 제47권3호
• /
• pp.171-175
• /
• 2017

Negative staining has been traditionally used for exosome imaging; however, the technique is limited to surface topology only and can cause staining artifacts. Therefore, to analyze the internal structure of exosomes, we employed a method of block preparation, thin sectioning, and electron tomography. In addition, an automatic serial sectioning technique with 15-nm thickness through focused ion beam was employed to observe the three-dimensional structure of exosomes of various sizes. Cryo-transmission electron microscopy revealed the near-to-native structure of exosomes.

• 한국공간구조학회논문집
• /
• 제16권4호
• /
• pp.133-140
• /
• 2016

SLIM AU(A plus U-shaped) composite beam had been developed for not only reducing the story height in residential and commercial building, but also saving the cost of floor construction. The structural performance and economic feasibility was sufficiently approved by means of structural experiments and analytical studies. Even though fire resistance of the SLIM AU composite beam was evaluated throughout furnace fire test, the fire performance of the composite beam using finite element analysis is not analysed yet. Therefore the predictions of fire resistance simulations with loading as well as temperature distribution of the composite beam are summarized in this paper.