• International Journal of Concrete Structures and Materials
• /
• v.18 no.2E
• /
• pp.97-102
• /
• 2006

In this study, the effect of supplementary materials(GGBS, PFA, SF) on sulfuric acid corrosion resistance was assessed by measuring the compressive strength, corroded depth and weight change at 7, 28, 56, 91, 180 and 250 days of immersion in sulfuric acid solution with the pH of 0.5, 1.0, 2.0 and 3.0. Then, it was found that an increase in the duration of immersion and a decrease in the pH, as expected, resulted in a more severe corrosion irrespective of binders: increased corroded depth and weight change, and lowered the compressive strength. 60% GGBS mortar specimen was the most resistant to acid corrosion in terms of the corroded depth, weight change and compressive strength, due to the latent hydraulic characteristics and lower portion of calcium hydroxide. The order of resistance to acid was 60% GGBS>20% PFA>10% SF>OPC. In a microscopic examination, it was found that acid corrosion of cement matrix produced gypsum, as a result of decomposition of hydration products, which may loose the structure of cement matrix, thereby leading to a remarkable decrease of concrete properties.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.949-952
• /
• 2005

According to the national space program in Korea, is satellites will be launch into space up to 2015. Especially, KARI is going to develope of its own a high resolution camera of less than 1m to be mounted on next Multipurpose Satellite. When performing testing of large spacecraft or hardware that will be launched into orbit, it is necessary to conduct a testing with space-simulated environment. To achieve this requirement, thermal vacuum chamber is generally used. KARI has been developed a very Large Thermal Vacuum Chamber(LTVC) from 2003 to accomodate future space program, such as KOMPSAT, COMS, and Launch vehicles. This new facility will be used to qualify the first self developed High Resolution Camera, which will be loaded on KOMPSAT-3. To perform an optical test for space camera, it is necessary to provide vibration free environment. Thus the vibration responses on the optical table due to external vibration should be minimized by using a special isolation system. In this paper, we propose the concept design of vibration isolation system for the development of the high resolution camera.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.98-98
• /
• 2011

직물의 경우 드레이프성을 줄이고 KOSHI감(stiffness)을 부여하기 위해 일반적으로 나이프(knife) 코팅가공을 주로 사용한다. 하지만 니트는 워낙 신축성이 뛰어나기 때문에 큰 장력을 요구하는 일반 코팅공정을 적용할 경우 원단이 나이프에 밀리는 현상과 신장 상태에서 경화되어 니트 특유의 신축성을 완전히 읽어버리는 문제가 발생한다. 따라서 니트 코팅 가공을 위해 원단에 장력이 걸리지 않으며 니트 원단에 직접 수지를 도포하는 방식이 아닌 간접 도포가 가능한 장비를 고안하였다. 즉, 아래에 나타낸 모식도와 같이 프로팅이나 over roll 나이프 방식을 사용하여 전사에 필요한 수지를 R/F에 코팅하고 이를 니트와 붙인 후 열풍 건조기와 열실린더를 통과시켜 수지가 니트에 전사되도록 하는 것이다. 본 연구에서는 고신축성과 탁월한 포면 터치감을 가지는 니트를 겉옷 및 다양한 용도로 전개하기 위해 R/F(releas fabric)의 조건을 설정 및 코팅 조건 설정을 통해 니트 가공 직물의 성능 변화를 살펴보기로 한다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.7
• /
• pp.819-825
• /
• 2014

The diurnal range of temperature in korea is increasing. We know that the environment has deteriorated through report about railway damage and economic loss caused by climate. In these conditions, Monitoring device for railway must operate to support the operations and maintenance. Therefore, In this paper, COM-based monitoring device implemented using Industrial-Extended electronic components and made, We tested compliance about temperature environment of actual railway. We verified through testing about cold and dry heat of monitoring device. Used components in this product will be able to utilize the development of the railway industry of electronics.

• Proceedings of the KIEE Conference
• /
• 2008.11a
• /
• pp.368-369
• /
• 2008

현재 국내 중전기 시장은 시장규모에 비해 다수의 기업이 참여하고 있기 때문에, 국내 중전기 업체간 정쟁은 더욱 심화되고 있다. 따라서 국내 중전기 업체가 더욱 발전해 나아가기 위해서는 해외시장 진출 확대를 위한 수출용 전적기기의 개발이 시급하고, WTO 체제하의 시장 개방화 정책에 따른 국내외시장에서의 User의 요구에 부응하는 전력기기 개발이 절실히 요구되어 당사에서는 국책과제로써 IT 기술을 기반으로 하는 245kV Motor-drive형 초고압 GIS를 개발하게 되었다. 금번에 개발된 절연개폐장치는 변전소 자동화라는 세계적 추세에 맞추어 Bay Controller 및 전자식 변성기(NCIT)를 적용하였고, 자체 참고시험을 통해 확보된 피시품을 가지고 국제공인인증기관인 한국전기연구원(KERI)에서 IEC 국제규격에 준하여 그 성능을 검증하였다.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1324_1325
• /
• 2009

The heterolayered $BaTiO_3/(Bi_{0.5}Na_{0.5})TiO_3$ thick films were fabricated by screen printing techniques on alumina substrates electrodes with Pt. We report the improved ferroelectric properties in the heterolayered teteragonal/rhombohedral structure composed of the $BaTiO_3$ and the $(Bi_{0.5}Na_{0.5})TiO_3$ thick films. We investigated the effects of deposition conditions on the structural and electrical properties of the heterolayered BNT/BT thick films. The structural and electrical properties of the heterolayered BNT/BT thick films were studied. All PZT heterolayered thin films show dense and homogeneous structure without the presence of the rosette structure. The dielectric constant, loss and remanent polarization oft heheterolayered BNT/BT thick films were superior to those of single composition $BaTiO_3$ and $(Bi_{1/2}Na_{1/2})TiO_3$, and those values for the heterolayered BNT/BT thick films sintered at $1100^{\circ}C$ were 916, 0.79 and $12.63{\mu}C/cm^2$.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.11
• /
• pp.1931-1936
• /
• 2016

In this paper, we analyzed causes of accidents that recently increased in the illegal and defective LED lamps. They were analyzed by the electrical characteristics calculation and reappearance experiments. The causes of the accidents were analyzed from the circuit affected by the variation of voltage, current and power by harmonics. We drew a conclusion for electrical safety in illegal or degraded LED lamps from the analysis result. The management factors for electrical safety in LED lamps were harmonics, reactive power and power factor. It is possible to secure the electrical safety through monitoring of power factor in failure products and available in smart meters or smart distribution boards.

• The Korean Journal of Health Service Management
• /
• v.9 no.2
• /
• pp.57-68
• /
• 2015

This study investigated factors that affect stress recognition, depression, suicidal thoughts and health-related quality of life for diabetics over 50 years of age. Five hundred one diabetics were surveyed who participated in the 4th Korea National Health and Nutrition Examination Survey 2009. The data were analyzed with multiple regression analysis and Structural Equation Model to determine the factors. The results are as follows. Men, older and lower income groups, those not involved in economic activities, smokers, and drinkers showed a lower quality of life (p<0.001). There was no correlation with moderate-intensity exercise. Stress recognition (t=-4.229, p<0.001), depression (t=-2.156, p<0.05), and suicidal thoughts (t=-3.274, p<0.001) had significant effects on the quality of life (p <0.001, $R^2=0.25$). The most important of these factors is stress. Being diagnosed as a diabetic changes the lives of patients, who come under stress from controlling their blood sugar level. Societal support should be developed to help patients cope with the challenges of diabetes.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.22 no.2
• /
• pp.73-82
• /
• 2004

A thermal transfer method was developed novel method to form the phosphor screen for monochrom VPT. This method have advantages of simple process, clean environment, saving raw material and running-cost. But now applying phosphor screen for thermal transfer method has been formed three layers (phosphor layer, ITO layer and thermal adhesive layer) on the PET film as substrate. This is complex process, consumption of raw-material and require of high cost. Also ITO paste at present has been imported from Japan. To improve these problems, we have developed ITO paste as conductive paste by using ITO sol and binder resin (AA3003). Ito paste as developed in this study has both conductive and excellent thermal transfer abilities. Thus we could manufacture phosphor screen formed two layers (phosphor layer and ITO layer).

• Journal of the Korean Graphic Arts Communication Society
• /
• v.22 no.1
• /
• pp.53-64
• /
• 2004

The CRT(cathode ray tube) in oscilloscope consists of an electron gun, horizontal vertical deflection system and a phosphor screen. When the electron beam strikes the phosphor screen, the phosphor generates light. The phosphor screen has formed by CRT precipitation method. But, this method has some defects that are complex process, low yield, much consumption of raw-material, dirty working environment, waste problem, require of high cost. Moreover phosphor for oscilloscope used at present has been imported from Japan. Therefore developments of new phosphor and new method(the screen printing) top form phosphor screen for oscilloscope are required to improve these matters. This study was developed novel method(the screen printing) to form the phosphor screen for oscilloscope used new phosphor. This screen printing method has advantages of simple process, high yield, clean working environment, saving raw material and running-cost.