• Journal of Mushroom
• /
• v.16 no.4
• /
• pp.267-271
• /
• 2018

This study was carried out to select the suitable for bag cultivation of Lentinula edodes. We investigated the optimal major materials and its mixing ratio in bag cultivation of L. edodes, 'Sanjo701ho' and 'Nongjingo'. The Suitable substrates for L. edodes bag cultivation were oak sawdust and douglas fir sawdust and rice bran mixed ratio 40:40:20(v/v). At the result, the period mycelial incubation shortened up to 13~18 days compared to the control. And Yield of commercial fruiting bodies was 17~19% higher than that in control. We expect that the cultivation period of L. edodes will be shortened, and the yield increased in the medium replaced half of oak sawdust by douglas fir sawdust.

• Journal of Mushroom
• /
• v.14 no.2
• /
• pp.34-38
• /
• 2016

This study was performed to determine most appropriate mixed ratio of brewers dried grain to wheat bran as a nutrient supplement in the plastic vinyl bag cultivation of Grifola frondosa. In the examination of an appropriate nutrient source, the IV substrate formulation (80 : 10 : 10, oak sawdust : wheat bran : brewers dried grain) resulted in 71.6 days to harvest and the highest yield of 142.6 g/bag. On the other hand, the investigation of the optimal mixing ratio of beer waste to wheat bran showed that the III substrate formulation (80 : 5 : 15, oak sawdust : wheat bran : brewers dried grain) resulted in the least days to harvest (61.8 days), with the highest yield of 140.8 g/bag.

• Journal of Korean Society for Atmospheric Environment
• /
• v.15 no.4
• /
• pp.417-428
• /
• 1999

The measurement of VOSCs(volatile organic sulfur compounds) in the air is nowadays a very important environmental research field. It is, however, very difficult because the concentration of the VOSC in ambient air is usually very low and the high reactivity makes it difficult to keep in container without loss of recovery. In this study, sampling method with cryogenic preconcentration is evaluated for analysis of atmospheric VOSC such as $CH_3SH,\;CH_3CH_2SH,\;CH_3SCH_3,\;CS_2,\;CH_3SSCH_3,\;CH_3SCH_2SCHA_3,\;and\;C_2H_5SSC_2H_5$ analyzed by GC-MS or GC-FID. Repeatabilities of measurement accompanied with preconcentration for 3-successive runs were in the range of 0.2~1.0% as a relative standard deviation. Stabilities up to 13 days were measured in 6 L canister and 10 L tedlar bag filled with VOSCs in ppb level. Higher stability was observed in tedlar bag as compared to canister with glass coated inner walls, and thiol compounds show dramatic losses in canister within 2~3 days. It is found that recovery over 70% was obtained in a week for all tested VOSCs when the compounds from ambient air matrix were stored in tedlar bag. It is also found that the stabilities of VOSCs are depending on humidity and coexisting compounds in matrix gas due to sample adsorption onto inner surface and reactivity. The results indicate the possibility and limitations of VOSC analysis in ambient air using container sampling method with cryogenic preconcentration.

• Composites Research
• /
• v.33 no.5
• /
• pp.302-308
• /
• 2020

We measured the thermal conductivity of composite materials manufactured by the autoclave and vacuum bag only processes and predicted the cure behavior of the external and internal of composite parts with a cure kinetics model. The temperature difference between the external and internal depends on the processes because of the change of thermal conductivity. In the autoclave process, the temperature and cure behavior of the internal were similar to those of the external because of the high thermal conductivity. However, the temperature of the internal of the vacuum bag only process was different from that of the external. The difference can influence the part quality and evacuation of air. Compression tests were performed to find the mechanical property using 0° unidirectional specimens. The composite of the vacuum bag only process was found to have a lower compressive strength than that of the autoclave process.

• Asian-Australasian Journal of Animal Sciences
• /
• v.8 no.5
• /
• pp.433-441
• /
• 1995

A series of experiments was conducted to determine the influence of various pepsin-HCL pretreatment factor, hereby the factors of duration of washing for the retrieved bags, inherent to the mobile nylon bag technique (MNBT), on apparent ileal digestibility of crude protein (AIDCP) and apparent ileal digestibility of dry matter (AIDDM). At last, the AIDCP and apparent ileal digestibility of amino acids (AIDAA) in maize, barley, wheat, rapeseed meal, cottonseed meal and three mixed diets were determined with the MNBT and ileo-rectal anastomis pigs (IRAT). For the MNBT techniques, bag measuring $25{\times}40$ MM and containing 0.75 g feedstuff samples, after pre-digestion in vitro, were introduced into the ileo-rectal anastomis pigs (IRAT) gastrointestinal tract through a duodenal cannula and recovered in the ileal digesta between 6 and 12 h. later. 1. The apparent ileal digestibility of dry matter (AIDDM) and crude protein (AIDCP) of the tested samples, with the exception of fish meal, determined by MNBT were not affected by the different pepsin-HCL pretreatment times in vitro between 2.5 h. and 4 h. 2. There was no significant (p > 0.05) difference of the AIDCP and AIDDM of maize determined by the MNBT among different pepsin concentration (0.03%, 0.07% and 0.1 %) treatment in vitro. 3. The AIDCP determined with the MNBT was affected by the washed and unwashed recovered bags from the ileal digesta. 4. The AIDCP and AID amino acids (AIDAA) of maize, barley, wheat, rapeseed meal, soya-bean meal, cottonseed meal and three mixed diets from the MNBT, with a solution of 0.01N HCL (PH 2) and 0.1% of pepsin concentration, a pepsin-HCL pretreatment time in vitro or 4h. and a washing time of the recovered bag from the ileal digesta compared well with those from the IRAT. The linear regression analysis showed a significant correlation (p < 0.01) of AIDCP and AIDDA between the IRAT and MNBT.

• Journal of Korean Society for Atmospheric Environment
• /
• v.31 no.1
• /
• pp.54-62
• /
• 2015

Small scale paint overspray booths are being operated nationwidely, for repair of passenger car body parts. paint aerosols are emitted from the paint overspray booth in operations. In paint overspray booth operations without ventilation system and air pollutants collection unit, it may land on nearby equipment. In this study a removal of sticky paint aerosol for application of the small-scale overspray paint booth. it's cause the surface of filter bag from generated sticky paint aerosol. To remove adhesion of paint aerosol the agglomerating agents are injected and mixed with sticky paint aerosols prior to reach the filter bag. The paint spray rate was set as $10{\pm}5g/min$ from air-atomized spray guns in the spray booth, injection rate of agglomerating was $10{\pm}5g/min$ in the mixing chamber. The filtration velocity including air pollutants varied from 0.2 m/min to 0.4 m/min. Bag cleaning air pressure was set as $5.0kg_f/min$ for detaching dust cake from surface of filter bag. Bag cleaning interval at the filtration velocity of 0.2 m/min was around 3 times longer than that of the 0.4 m/min. The residual pressure drop maintained highest value at the highest filtration velocity. Fractional efficiency of 99.952%~99.971% was possible to maintain for the particle size of 2.5 microns. Total collection efficiency at the filtration velocity of 0.2 m/min was 99.42%. During this study we could confirm high collection efficiency and long cleaning intervals for the test with filtration velocity of 0.2 m/min indicating an optimal value for the given dimensions of the test unit and test operating conditions.

• Horticultural Science & Technology
• /
• v.28 no.4
• /
• pp.561-566
• /
• 2010

The effects of calcium concentrations of coating bag treatment to reduce berry cracking were investigated through the changes of pericarp structure and berry cracking rate in 'Kyoho' grape. The soluble solids and anthocyanin contents in harvested grapes were highest at $18.1^{\circ}Brix$ and $2.56{\mu}g{\cdot}cm^{-2}$ in non bagging group compared with those of calcium coating bag treatments. The firmness of pericarp was lowest in non bagging group ($1.18kg{\cdot}5mm^{-1}{\O}$) compared with bagging treatments (1.23, 1.24, 1.27, $1.35kg{\cdot}5mm^{-1}{\O}$) which increased effectively in proportion to calcium concentration. As a result of histological observation of the fruit skin, the bagging with higher calcium concentration developed thicker epidermal and sub-epidermal layer of cell wall than that of non bagging. Moreover, the strengthened berry skin of calcium treatments effectively decreased berry cracking rate under critical turgor pressure. However, the 9% calcium coating bag treatment which was the most effective for cracking reduction seriously decreased marketability of harvested grape with white color staining on berry skin caused by eluted calcium from the coated paper bag. Based on our results, we recommend that 6% calcium coating bag be available for berry cracking reduction and higher quality production.

• Environmental Engineering Research
• /
• v.14 no.4
• /
• pp.212-219
• /
• 2009

Emission characteristics of air pollutants from three commercially operating cement kilns co-burning waste were investigated. The major heavy metals emitted were mercury (Hg), zinc (Zn), nickel (Ni), chromium (Cr), lead (Pb), cadmium (Cd), and arsenic (As) Removal efficiency of the bag filter was above 98.5% for heavy metals (except Hg), and above 60% for Hg. Higher fractions of heavy metals entering the bag filter were speciated to cement kiln dust. On average, 3.3% of the -heavy metals of medium and low toxicity (Pb, Ni, and Cr) entering the bag filter were released into the atmosphere. Among highly toxic heavy metals, 0.14% of Cd, 0.01% of As, and 40% of Hg entering the bag filter were released into the atmosphere. In passing through the bag filter, the proportion of oxidized Hg in all cases increased. Emission variations of hazardous air pollutants in cement kilns tested were related to raw materials, fuel, waste feed and operating conditions. Volatile organic compounds detected in gas emissions were toluene, acrylonitrile benzene, styrene, 1,3-butadiene, and methylene chloride. Although hazardous air pollutants in emissions from cement kilns co-burning waste were within the existing emission limit, efforts are required to minimize their levels.

• Journal of the Korean Society of Physical Medicine
• /
• v.5 no.1
• /
• pp.15-24
• /
• 2010

Purpose : The purpose of this study was to investigate the effect of loading position on plantar center of pressure(COP) displacement when carrying a schoolbag during walking. Methods : Forty-four normal subjects were randomly assigned to five groups according to the method of carrying a schoolbag. The carrying a schoolbag methods were classified into five conditions: no bag (condition 1), a backpack (condition 2), a shoulder bag (condition 3), a cross bag (condition 4), a one-hand bag (condition 5). COP displacement such as anteroposterior distance and mediolateral distance of COP were measured with F-scan system. The repeated one-way analysis of variance (ANOVA) and independent t-test were used to confirm the statistical significance. Results : In the comparison of parameters of COP displacement between conditions, anteroposterior distance and mediolateral distance in the left foot and mediolateral distance in the right foot were not significantly different(p>.05), but anteroposterior diatance in the right foot was significantly different(p>.05). Between left and right foot, at condition 1 and 5 the mediolateral distance of COP was significantly different(p<.05) but anteroposterior distance at condition 1 and 5, anteroposterior distance and mediolateral distance of COP at condition 2, 3 and 4 were not significantly different(p>.05). Conclusion : These findings showed that the various loading position by five types of carrying a schoolbag didn't have influence significantly on COP displacement on during walking because of mechanism of postural adaption.

• Culinary science and hospitality research
• /
• v.13 no.2
• /
• pp.216-222
• /
• 2007

Sometimes the problem occurs that a paper knob and a thread attached to a tea bag fall into tea water in pouring tea water into a conventional cup to extract bag type tea. A new cup was developed to solve that problem, which was formed with a thread groove(dia. ; about $1.5{\sim}2\;mm$, hight ; about $4{\sim}5\;mm$) in the upper end of the cup. As a result, the new cup with a thread groove is expected that a paper knob with a thread does not fall into tea water. In addition, the size of a paper knob and the length of a thread may be reduced 70%, respectively.