• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.12
• /
• pp.1620-1624
• /
• 2009

This study aimed to clarify the effect of mobile bag size and ratio of sample size to bag surface area on intestinal digestibility of forage in sheep. Four Suffolk ewes fitted with ruminal and proximal duodenal cannulae were fed second-cut Italian ryegrass (Lolium multiflorum Lam.) hay twice daily, and the same forage was used to measure intestinal digestibility. The forage samples were incubated in the rumen for 16 h and then in pepsin-HCl solution for 3 h before intestinal incubation. The incubated forage samples were placed in a nylon mobile bag. The bag sizes used were either 20 mm${\times}$20 mm (small bag size; SBS) or 30 mm${\times}$30 mm (large bag size; LBS) and the ratio of the sample size to the surface area of the bag was either 5.5 $mg/cm^{2}$ (low ratio; LR) or 11.0 $mg/cm^{2}$ (high ratio; HR) resulting in four different treatment conditions: SBS-LR, SBS-HR, LBS-LR and LBS-HR. Eight bags per animal were inserted through the duodenal cannulae at 15-min intervals and were subsequently collected from the feces of the animal. The mean intestinal bag transition time did not differ significantly between animals, but ranged from 23.2 to 27.0 h. The intestinal digestibility of dry matter (IDDM) ranged from 0.162${\pm}$0.019 g/g in the SBS-HR treatment group to 0.195${\pm}$0.018 g/g in the SBS-LR treatment. The intestinal digestibility of crude protein (IDCP) ranged from 0.610${\pm}$0.031 g/g in the LBS-LR treatment to 0.693${\pm}$0.018 g/g in the SBS-LR treatment. There was no difference in the IDDM and IDCP between different treatments. It was therefore concluded that the size of the mobile bag and the ratio of the sample size to the bag surface area did not influence the intestinal digestibility of forage. Future studies should use bags with high ratios of sample size to surface area in order to obtain sufficient residue for further analysis.

• The Journal of the Convergence on Culture Technology
• /
• v.4 no.4
• /
• pp.439-448
• /
• 2018

With the aim of examining changes in plantar pressure while walking depending on the position of carrying a bag, this study measured the plantar pressure of 33 normal male and female adults using the F-scan System in four different positions to carry a bag: walking without carrying a bag; walking with carrying a bag on both shoulders; walking with carrying a bag on one shoulder; and walking with carrying a bag in one hand. Changes in the plantar pressure of the subjects obtained in this study and the asymmetry of the left and right feet were analyzed. The plantar pressure of the different areas of the feet in the four different positions to carry a bag was compared. The left foot, except its toes and metatarsus, showed a statistically significant difference among the five conditions, and the right foot, except its 4th and 5th caput metatarsalis, also showed a statistically significant difference (P>.05). Given the results of this study, this experiment to examine changes in plantar pressure does not seem to be enough to identify which position to carry a bag, except carrying a bag on both shoulders, would have the lowest negative impact on the feet. It will be necessary to conduct a follow-up study on changes in plantar pressure depending on the position of carrying a bag and methods that can effectively treat abnormal positions such as scoliosis and kyphosis using asymmetric loads.

• Journal of Korean Society of Transportation
• /
• v.21 no.2
• /
• pp.7-16
• /
• 2003

To minimize the death and injury by a collision, the installation of an air bag is recommended as a mandatory practice together with the wearing of the seat belt. By using simulated collision experiments, this research focused on the effect of an air bag and seat belt on the driver safety. The vehicle deceleration characteristics were obtained from impact experiment. LSDYNA, a software program for vehicle collision analysis, and MADYMO. a software program for driver motion after collision, were used for simulated experiment. Four cases such as air bag installed and seat belt wearing (case A), air bag installed but seat belt not wearing (case B), air bag not installed but seat belt wearing (case C), air bag not installed and seat belt not wearing (case D) were analyzed. The impact of acceleration on the injury of driver's head was analyzed by Head Injury Criterion (HIC) as well. It was found that having air bag and wearing seat belt effectively reduced driver's head injury about 52.9% to 70.5% compared with the case of having neither air bag nor wearing seat belt.

• Particle and aerosol research
• /
• v.6 no.4
• /
• pp.173-183
• /
• 2010

The high temperature pleated filter bags which were used during this study were made of pleated nonwoven fabric of heat and acid resistant polysulfonate fibers which can withstand the heat up to $300^{\circ}C$ and have a filtration area which is 3 to 5 times larger than the conventional round filter bags. Cartridge module packed with 3 kind of the sulfur impregnated activated-carbon based sorbents were inserted in the inner of the pleated filter bag. This type of pleated filter bag was designed to remove not only the particulate matter but also the gaseous elemental mercury. The electrostatic precipitator part can enhance the particulate removal efficiency and reduce the pressure drop of the pleated filter bag by agglomerated particles to form a more porous dust layer on the surface of the pleated bag which is increased the filter bag cleaning efficiency. In addition, the most of particles are separated from the flue gas stream through the cyclone and the electrostatic precipitator part which were installed at the lower part and main body part of the convergence particulate collector, respectively. Thus reduce particulate loading of the high temperature pleated filter bags were applied in this study to analyze the removal characteristics of particulate matter and gaseous elemental mercury.

• Journal of Environmental Science International
• /
• v.32 no.11
• /
• pp.801-809
• /
• 2023

The purpose of this study is to predict the reflection distance following to the pulsing pressure, total air supplying, filter bag size using numercial analysis techniques and use it as an efficient operation condition and economic data for off-line type pulse air jet bag filter. In this research, filtration area 6 m² condition, calculate filter resistance coefficient for simulation through the main experiments using coke dust. Ansys fluent V19.0 apply to CFD simulation, and analysis pulsing characteristics about pulsing pressure, filtration velocity and nozzle diameter. The maximum reflecting distance of off-line type pulse air jet bag filter is 1,000 mm regardless of total air supplying at over the 42 L/m² conditions, that indicates off-line type can extend filter bag length 1,000 mm than on-line type. In order to effective primary and secondary pulsing of off-line type pulse air jet bag filter, over the 5 bar of pulsing pressure and over the 42 L/m² of total air supplying are needed.

• Journal of the Korea Convergence Society
• /
• v.9 no.1
• /
• pp.111-116
• /
• 2018

The aim of this study was to determine the effects of tote bag weight on muscle thickness of pectroalis minor and tone of upper trapezius in young adult women. 27 women habitual of carrying tote bags. The subjects were measured the tone of the upper trapezius muscle and the thickness of the pectoralis minor muscle while carrying tote bags with the weight of 0%, 5%, 7.5% and 10% of the subjects' body weight. As the weight load increased, the upper trapezius muscle demonstrated significantly increased muscle tone (p<.05). additionally, a significantly increased thickness in the pectoralis minor muscle was noted(p<.05). These findings suggest that the habit of carrying a tote bag on the wrist may be disadvantageous to improving the two muscles in young women. Therefore, this study recommend women who likely used tote bag decrease the weight of the bag.

• Journal of Internet of Things and Convergence
• /
• v.5 no.1
• /
• pp.29-34
• /
• 2019

A bag filter collector is a kind of air purifier that organizes several or dozens of filters to purify fine dust and release clean air into the atmosphere. If the bag filter length is less than 5m, the dust and fume attached to the bag filter could be effectively removed by passing the compressed air generated by the diaphragm valve through the venturi. Injectors that are more efficient and economical are urgently needed to achieve satisfactory results for long-bag exhaustion of more than 7 meters. In the case of existing domestic and foreign injectors, a number of blow tubes were dismantled during maintenance, and the injector and blow tube were combined to pose a number of problems, including inconvenience of work due to weight increase. In this study, injector flow for the development of the best use of interpretation of the coanda effect and the fourth round of industrial technology Intelligent automation of exhaustion, have been engineered energy than standard equipment. lowering costs and filter life to radically improve the commercial studies.

• Journal of Climate Change Research
• /
• v.9 no.1
• /
• pp.59-67
• /
• 2018

In this study, the $N_2O$, emitted from combustion facility, were analyzed by using simulated gas and field samples to find out how long samples can be stored in Tedlar bag. According to the results of the experiment using simulated gases (1 ppm, 5 ppm, 10 ppm) in Tedlar bag, After 144hr, $N_2O$ concentration of simulated gases changed that 1 ppm is 5.3%, 5 ppm is 12.8%, and 10ppm is 10.5%. The higher initial concentration of simulated gas was, the larger rate of $N_2O$ concentration was changed. In case of high concentration samples, it need to be careful when it was analyzed after 144 hr. Stability evaluation in Tedlar bag was carried out through field samples such as combustion facility of bituminous coal, B-C oil and LNG. The concentration rate of field samples, which is under 1 ppm of average initial concentration, was evaluated using statistical method. As a result, $N_2O$ concentrations were changed to field samples in the bag even when 96 hr had passed. And after sampling, it is necessary that sample analysis should be quickly as soon as possible.

• Korean Journal of Food Science and Technology
• /
• v.17 no.6
• /
• pp.431-436
• /
• 1985

The major sterol in the unsaponifiable matter (15.9 mg per gram on basis) of the sesame oil was 4-desmethylsterol (55.6%). 4-desmethylsterol consists of sitosterol (29.5%), campesterol (9.8%), ${\Delta}^5$-avenasterol (6.6%) and stigmasterol (5.9%). Between the packing bags kept the sesame seeds in, namly, the cotton and polyethylene bag, the campesterol content of sesame stored in the cotton bag was not nearly changed, whereas stored in the polyethylene bag was increased upto 4 months storage and then decreased until 15 months. The sitosterol content of sesame stored in cotton bag was increased upto 4 months and then decreased sharply until 15 months of storage, whereas stored in the polyethlene bag was not changed upto 4 months and slightly increased upto 9 months and again decreased until 15 months. Between the storage conditions, namly, light and dark storage, the stigmasterol content of the sesame stored under light condition was hardly changed upto 9 months and slightly increased after that, whereas stored under dark condition was increased upto 4 months, decreased upto 9 months and again slightly increased after that. ${\Delta}^5$-avenasterol was not much changed in all the storage conditions.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.633-636
• /
• 1999

In this study, we have fabricated amorphous FeZrBAg thin films with low core losses by using DC magnetron sputtering method. After deposition, rotational field annealing (RFA) method was performed in the dc field of 1.5 kOe. The amorphous FeZrBAg thin films produced by annealing at 35$0^{\circ}C$ was founded to have high permeability of 8680 at 100 MHz, 0.2 mOe, low coercivity of 0.86 Oe high magnetization of 1.5 T and very low core loss of 1.3 W/cc at 1 MHz, 0.IT respectively. Excellent soft magnetic properties in a amorphous FeZrBAg thin films in the present study are presumably the homogeneous formation of very fine bcc $\alpha$-Fe crystalline with the 8.2 nm in an amorphous FeZrBAg thin film matrix.